1999-2006 Sierra, Silverado 5/7 Drop Kit Installation, C Notch, Street Performance, Reklez, StepSide 

Prices by phone only (832)770-4366 Buy online www.reklez.com. Thank you for watching God Bless.

Looks great, great video very quick and straight forward

Clean and great work 👌🏻🔥

Those wheels actually look good on there!

very nice turned out great!!!

PERFECT STANCE

I have the same truck and want to run the same tire size with 20s but I’m not sure if 4/6 or 5/7 , I know 5/7 will affect my ride and 4/6 is more comfortable

Damn looks almost identical to my silverado other than the gmc badges and lights grill

I have an 07 classic single short like this one with a 2/4 drop on the same 20"s... this makes me want to go lower

Hey guy..Drop looks sick! I just did a 2/4 (no notches)with Beltechs all around on 265/40/22 on my 02 stepside..My question is how can I gain a smother ride?? Mine rides rigged like truck but the light weight stepside doesnt seem to wanna compress the shocks an it rides rather high up in the stroke. Should I get adjustable rear shocks to help with the compression? Any suggestions?

What shocks do you guys run for this ? And does the bed bounce ?

*Gran trabajo se ve chingona*

Ive heard with the mcgaughys spindles you have to flip the lower ball joint. Is that really necessary

Can you provide the link to the bolt in super notch. Cause on your sight you do not offer the bolt in notch .

Did you guys replace front hub and bearing or re-used them?

If we do an appoitment would yall be able to do it on the weekend or no

Looks really nice. Thanks for talking with me this weekend at LST. Do you offer any kits for a GMC Canyon 05 or F150 shortbed regular cab 2003

What do you guys use paint or rust protector when you do the cutting?

On my 2007 Silverado is 5/7 245 45 20 will fit fine

Great video I have one question how low can I go on my 99-02 Silverado with 295/35r24 in the front without tubs or rubbing issues?

nice clean look👍

Awesome brotha but I live in Dallas bro can I order that kit from yall??

How long will it take y’all to do it???

Hello for that configuration on the rear is not required the shock extenders?

Whats the lowest u can go without a notch before u start bottoming out, I have a 2004 Silverado like the one in the vid but it’s a cateye

Ey plz tell me how many it will cost that drop on a 97 cheyenne single cab ??

I heard when you go any lower than 4/6 drop you will need to get lowering upper and lower control arms? Will I need to do it with this kit

I have put a flip kit but my truck shakes from the back why ?

I have the same truck do you need to replace the front upper control for fix the negative camber?

Do I need tubs anywhere for this drop on a fleet side tho

all i need to know, is what size tires those are on the 20s? i want this drop but with 22s but only want to go as thin as 265/35/22

I have a 2001 2wd Suburban, I have a 3/5 on already, but I wanna drop 5/7. Will I need to notch it?

will it ride good on 24s ??

Did it already have a c notch?

How do you like the drivability now it sits so low? I have the same drop kit on mine, I bottom out on every small bump that's over 1 inch high...drives so bad. I cant even drive up onto a lift to get a look under neither its too low.

does the 5/7 scrape speed bumps

Do you have to mess with the pinion angle when doing this drop?

That's what I need a spindle on my 2002 Stepside 😕

I have the same truck but regular bed on same tires if i do a 5/7 will the frame be hiting alot on the ground

Doesn't that kit require removal of the lower ball joint from inside the lower control arm and relocating it to the upper side of the arm with a spacer inside the control arm? Looks like yall skipped the tough and crucial step of the install @ 1:52.

I’m doing 5/7 with under bed notch on 2000 gmc seirra 1500 17in rims what size tire can I use?

What's the price for a drop like that??

Hey bro I wanna get rid of the Chevy lean on my 02 single cab what do you recommend I do

Que omortiguadores me recomiendas istalar si tengo bajada 5/7

Just bought a vehicle already C-notched… the bed is suuuper loose/bouncy.. is this normal ?

Wat would be the part number for those shocks?? And do you need shock extenders for the rear on that drop. If u dont mind me asking any of that

How much is the kit and I only see the 4/6 drop kit bossman

Can i fit 22s with that drop?

Where you guys located???

How much does everything cost. ??

Can I get this with the under bed notch since I plan to go lower ? Just pay the difference

The only thing u need to raise is the gas tank. These trucks come with the fuel tank lower then the frame. I moved mine up 2.5 inches after i bagged it.

Going dine ....in H town!!!

Question? I bought a 99 silverado w/ a 5/7 drop. & i want to buy new control arms, inner & outter tie rods, sway bar & ball joints. Will they be the same factory ones or will i need to buy special ones due to the drop.

Is this a flip kit with 2 inch shackles in the back?

Do u guys install air bags

I have an 05 Silverado extended cab with torsion bars what I can do in that one

Does it rub with this tire setup? Love the videos

Love the way the truck looks with that 5/7 drop I have a 2006 Silverado and I want to do a 5/7 drop on it but if I do it can I fit 22” rims on it? Thanks

Did you shim the rear diff? I had to do mine on a 3/5 drop. It had vibration at speeds

WHAT Size are those front springs ?

I have a truck just like this, but would like to lower the truck and still be able to tow with it what would you recommend? I would also install bag in the rear to keep it from squating. Thanks

How does it ride?

But i already have the 2inch spindle can I just get the spring

How much is this kit?

So would da truck be lower on 18s??

20s actually dont look too bad I was wanting 22s but want more rubber so maybe I'll stick with 20s

Are u guys in florida

What's the total for lowering a truck like that?

I have a 2000 gmc sierra ext cab and im having vibration issues from speeds 25-30 mph it has a 2 piece drive shaft and i bought a bracket to straighten the drive shaft thinking it was that but it actually got a little worse what should i do?

I want to drop my 04 silverado x-cab stepside maybe do a 3 front 5 rear but dont know if is expensive

How much 5/7 for gmc sierra 2006?

How much for that 5/7 drop same truck as the one I the video.

How much installed?

Damn cuuuh

Dammit reckless on a DIFFERENT LEVEL.

Whats a good drop for a 2014 GMC Sierra but that you don’t need a c-notch or it hits

I have an 2001 and want to drop it but don’t want a C notch, what’s the lowest I can go?

Is there any lose in steering angle/radius?

Have yall ever had to cut a driveshaft on a 2014 single cab with a 5/7 drop ?

Hey if I cut the bolt do you think that’s a good idea lol because I’m trying fit 17

What if you put control arms what else do you gotta do for a 5/7

How much fore a the same drop on my silverado 02 singel cab

I need a 4-6 drop on my 1999 chevy silverado single cab around how much am i looking at?

how much for install?

What tire size?

How low can I go on a 4x4 1995 Tahoe 2door?

What springs you guys using?

Would that kit fit a 2004 Silverado single cab short bed v6?

Can I do a 4/6 drop on 2003 GMC Sierra with 20 inch rims single cab short bed v6 and how much would it be and where are y’all located?

Would i need to buy a raised transmission crossmember ?

Did you guys lock the bolt down on the tie rod

Would the kit work for a 98 stepside EXT cab silverado?

Pinces trocas perronas

How much would this drop from y’all cost for a 14 silverado

Do you have to Cut the frame for the sea notch

My drive shaft scrapes in the crossmember

Do you have to cut the bed if it’s a short bed

What’s the special nut and where can I get it

How do you fix camber issues???? I got a 4-6 on a silvy SS 2wd