Тёмный

1ZZ-FE 1.8L Timing Chain Replacement How To - For Toyota Matrix, Toyota Corolla, and Pontiac Vibe 

Chad Williams
Подписаться 31 тыс.
Просмотров 250 тыс.
50% 1

If this video was helpful, consider donating :)
Paypal - paypal.me/chadwilliams89
Cash App - cash.app/$chadwilliamsfixesall
Venmo - www.venmo.com/u/chadwilliams06
Amazon Links to Product used:
Complete timing set including water pump - amzn.to/3F6xe8P
Timing Set Only - amzn.to/3C8eR1w
Timing set with VVT Sprocket No waterpump - amzn.to/3D6Eq4o
Ultra Grey Gasket Maker - amzn.to/3D6TJKc
In this episode, we show you how to replace your timing chain on your Toyota Matrix, Toyota Corolla, and Pontiac Vibe. Let's get to it!
Torque Specs found here: www.billswebspace.com/ToyotaE...
Camshaft timing sprocket x Camshaft - 33 ft-lb
Valve timing controller assembly x Camshaft - 33 ft-lb
Chain vibration damper x Cylinder block - 8 ft-lb
Chain tensioner slipper x Cylinder block - 14 ft-lb
Timing chain cover:
1ZZ-FE: (See page EM-25) 10 mm head bolt A - 10 ft-lb
10 mm head bolt C - 80 in-lb
10 mm head bolt others - 8 ft-lb
12 mm head bolt D - 14 ft-lb
Stud (E8) - 82 in-lb
RH engine mounting bracket x Timing chain cover - 35 ft-lb
Driver belt tensioner x Timing chain cover bolt - 51 ft-lb
Driver belt tensioner x Timing chain cover nut - 21 ft-lb
Crankshaft pulley x Crankshaft - 102 ft-lb
Chain tensioner x Timing chain cover nut - 80 in-lb
Cylinder head cover x Cylinder head 1ZZ-FE
w/ Washer - 80 in-lb
w/o Washer - 8 ft-lb

Авто/Мото

Опубликовано:

 

23 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 205   
@user-zd3ns6wx7y
@user-zd3ns6wx7y 2 года назад
I enjoyed this. It’s the engine I have and have been wanting to learn more about it. Not at all confident I could do this by myself yet.
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
Maybe have someone help you so you can learn hands on. It really isn’t too hard, just a little tight if still in the car.
@MN2_Kevin_Hill_1970
@MN2_Kevin_Hill_1970 Год назад
I'm doing this job right now on my 2005 Pontiac Vibe. Thanks for the video.
@unclebs4732
@unclebs4732 2 года назад
My 300k Corolla made a noise when started for about 1 second. Changed the adjusted and still made nose. No problem, I'll change the chain and gears. After taking the engine apart, I noticed how the VVT moved with ease. There was a rattling noise in the VVT and it moved very easy. Took it apart and one ear of the rotor was BROKEN off! This job is a lot more involved in the car and with two people doing the job it goes much faster and yes you will need help without special tools.
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll Год назад
If this video was helpful, consider donating :) Paypal - paypal.me/chadwilliams89 Cash App - cash.app/$chadwilliamsfixesall Venmo - www.venmo.com/u/chadwilliams06
@ChaddyMack
@ChaddyMack 2 года назад
I'm just learning about cars. This was good insite on the purpose of the timing chain. Finnaly I see a video of someone taking off different parts from the belt. I wanna be able to identify the water pump and all the different things that the serpentine belt goes around with out having to look at a diagram haha. Thanks
@fireyourrocketts
@fireyourrocketts Год назад
I believe I may have it now, still want to take pictures to the dealer to a mechanic because I have questions and doubts; by watching your helpful video and reading the manual it is to understand the manual states the sprockets are to be held at 12 o clock, well, they hold close but even in this video you can see the VVTI is not at 12 o clock; I got to the point were everything was aligned as close as could be but not "perfectly" aligned, like I mentioned before with the chain marks aligned with the sprockets these sit close to 12 o clock but not exactly at 12 o clock, that gives me the TDC marks parallel on top but slightly above the timing cover line, not exactly at the line like the manual states, I have not torqued to specs yet or installed the covers until can confirm it will be right; this have been proved to be a nightmare for me!! Thanks again for the video, it really helps.
@mainasamuel
@mainasamuel 2 года назад
I have learned a great deal. Well explained
@kelvinruben8047
@kelvinruben8047 2 года назад
Thanks guys appreciate the lesson
@user-ji8ls9dr9f
@user-ji8ls9dr9f Месяц назад
Very well done! This is also a great How To on how to do How To videos! No distracting music, or BS.
@fahhad17
@fahhad17 2 года назад
for that timing chain tensioner you dont need to hit with screwdriver, all you need turn engine with ratchet , AMAZING VIDEO, thank you
@edwardoperez1663
@edwardoperez1663 Год назад
Hello, I just need to know where do you turn the crankshaft to release the chain tensioner? Is it clockwise or counter clockwise? Thank you and much appreciated.
@fahhad17
@fahhad17 Год назад
@@edwardoperez1663 counter . Just little bit , you will hear a click noise when it release
@osmarhernandez8372
@osmarhernandez8372 11 месяцев назад
also work clockwise i done a lot of times. just hear the click.
@dustintaylor2083
@dustintaylor2083 4 месяца назад
How likely is damage if the chain got so loose it won't start?
@user-jm6jf6nt4v
@user-jm6jf6nt4v 7 месяцев назад
Wow I'm trying to do a head job but I'm not sure now but you gave me an idea of what to expect for this job
@roogermoore1
@roogermoore1 Год назад
Thanks for putting that up. I’ll never try it but it makes me understand why it’s such an expensive job
@user-ji8ls9dr9f
@user-ji8ls9dr9f Месяц назад
It’s all doable if you are willing to invent some cuss words while you figure out the details.
@luisdorta9780
@luisdorta9780 11 месяцев назад
Thank You Guys!!!!
@banquetoflaughter3753
@banquetoflaughter3753 Год назад
Very well explained ❤❤❤❤
@jamesstuart3346
@jamesstuart3346 4 месяца назад
Excellent video! 😊
@richardlewis6147
@richardlewis6147 Год назад
Great morning love your videos
@stubbz71
@stubbz71 2 года назад
Great instruction!
@paigeturnahgonz3478
@paigeturnahgonz3478 7 месяцев назад
Hello
@AimForTheBushes908
@AimForTheBushes908 11 месяцев назад
Super helpful information and quality video. You guys made it relaxing and therapeutic (I would have been cussing out the car). You guys wouldn't happen to have a separate video on how to remove the engine out of the car would you? That's the only way i would even consider this doing this job myself lol.
@itsnotfunny8257
@itsnotfunny8257 10 месяцев назад
you don't need to pull the motor out mate, just put a jack under the sump and get to it.
@Antares191YT
@Antares191YT 2 года назад
Hey guys. Thanks a lot for the quality content. I am enjoying the matrix rebuild series. If you allow me to make a suggestion, I would suggest using a microphone when you record (I am assuming that you dont) because your voice is not very clear in the videos especially inside the garage. Cheers!
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
Thanks man! I love critique too! We do have a mic, but we got lazy on this one because we were so close to the camera. We should bust it back out though. Thanks again! :)
@marthab4172
@marthab4172 6 месяцев назад
@@ChadWilliamsFixesAll how many miles were on that engine? Thanks
@shingabiss
@shingabiss 7 месяцев назад
Great video!
@mxwxgxgxb
@mxwxgxgxb 2 года назад
great video
@jdsinsured
@jdsinsured 11 месяцев назад
thank you sooooo much!
@mushoo78
@mushoo78 2 года назад
I been had this question 🙋‍♂️
@bruceprigge5212
@bruceprigge5212 2 года назад
Thanks! :)
@duncanpage1556
@duncanpage1556 2 года назад
Excellent vid Guys! how many miles on the old chain? Thanks from Alberta
@cal48koho
@cal48koho Год назад
Great video. My question is why replace the timing chain? Did you measure stretch? If so how? I replaced the chain on a 80's MB diesel because it had obvious stretch which can me measured. I am thinking if the 150K motor had good oil changes, the chain might be just fine? I replaced the timing chain on a 300K 1zzfe just because it had 300K but I think it was still functional and didn't need replacement.
@daviddickensauge9133
@daviddickensauge9133 Год назад
great video do you have anything on changing an oil pump on a 2009 toyota matrix 1.8 engine
@torew01
@torew01 13 дней назад
Tip: Leave a nut or screw in when you tap them off, to keep parts from pounding to the floor.
@toufikait8960
@toufikait8960 Год назад
Hats off !! guys. I never went so deep (replacing a metal timing belt) in mechanic, so I'm surprised how come there's no seal or gasket between the cover an and the engine block when you re-assembling.
@chiggynoodlesoup2037
@chiggynoodlesoup2037 Год назад
You do need RTV sealant between the cover and the engine. They didn't apply it on camera because they have to take the cover off again later and don't want to seal it twice.
@limamantapachitas
@limamantapachitas 6 месяцев назад
@@chiggynoodlesoup2037 Ok that's why I thought, thanks for making it clear
@TheRainayan
@TheRainayan Год назад
First of Thank you for video and I am planning to change timing chain tensioner . I have question for you! Can just swap the timing chain tensioner ? I saw in other youtube video they just swap it but in this video you guys tap or press down from the top of
@faddyfellout4806
@faddyfellout4806 2 года назад
Hey what’s the torque spec for the exhaust cam and intake cam sprockets? I snapped my old exhaust cam bolt bc I heard it was like 75lbs…
@Jack1430.
@Jack1430. Год назад
Nice video! Congratulations for give us this information. Where did you find the pictures about the marks of the distribution? Thank you, from Spain.
@kbengson9163
@kbengson9163 4 месяца назад
Online or the factory service manual
@michaeldratcliff1465
@michaeldratcliff1465 Год назад
Yes I have a Pontiac vibe 2009 I got a blown head gasket and I'm trying to change it myself I know it pretty much know what I'm doing but I just need your help a little bit about how to put it back in time and make sure I do everything right
@gabewalker7604
@gabewalker7604 Год назад
What’s more important the dual dots where you aligned the two yellow parts on the chain or the red marks? It looks like your red dots are off one tooth?
@thomasnoel5943
@thomasnoel5943 2 года назад
I’m just curious where you guys are located, and if you do repairs for the general public?
@victorrosario4109
@victorrosario4109 Месяц назад
Just purchased a red and black leather interior 2005 corolla s with 200 k miles and runs like new. I want to learn about the engine. Great video. When should I replace the timing chain?
@davidknibbs9646
@davidknibbs9646 2 года назад
How did you know when it was Died top center. Is it when the Crack and key way in each line. First keyway Died top and the dot on the side casting or do you have two go two revisions and then top Died center???
@sethlogan-adams1100
@sethlogan-adams1100 Месяц назад
What do you put the wrenches on when lining up the top two sprockets
@firecharger
@firecharger 2 года назад
@14:32 can you link this cam locking tool you're talking about?
@terrellmack9630
@terrellmack9630 Год назад
Good afternoon. I would like for you to change a timing Chain assembly on a 2008 Scion XD. I was wondering if it has the same engine as the Toyota corolla?
@user-ot5dc3us1i
@user-ot5dc3us1i 10 месяцев назад
I need the torch specs & does the VVT gear need tobe unlocked when mounted & timmed? On the 05 1.8 in aVibe.
@Alexmechanic559
@Alexmechanic559 Год назад
Is it the same concept working with a 2zrfe Engine? I know the timing differs, but are the steps the same?
@user-ji8ls9dr9f
@user-ji8ls9dr9f Месяц назад
Can you still get OEM parts for this? If no, what brand is recommended?
@homecarebees769
@homecarebees769 Год назад
Torque specs please. Awesome video btw.
@testtesting2868
@testtesting2868 Год назад
Why didn't you mark and align the cams / crank before removing the chain?
@darylhatherrley5765
@darylhatherrley5765 2 года назад
Are you replacing the cams to?
@obedmoyo1002
@obedmoyo1002 2 года назад
Hey guys could you assist me with torque specs for the whole engine in Newton Meters or the conversions from the units you gave to Nm.
@elvisroye556
@elvisroye556 2 года назад
Do you have to remove the engine to replace the timing chain or can it be done relatively easily while still installed in the car?
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
You do not have to remove the engine to replace the timing chain. I have done it many times within the vehicle and it isn't too difficult.
@marthab4172
@marthab4172 6 месяцев назад
How many miles were on that engine? Thank you
@zackwis8958
@zackwis8958 2 года назад
Hey video helped a ton. Just wish you showed putting a steering pump on there. I can't get the pump back on. Edit: got it on just a pain while the engine is still in the car.
@BillyBobBigFoot
@BillyBobBigFoot Год назад
For those that don’t know, use the power steering bolt and nut to hammer the power steering bushings on the timing cover. Do this by putting the bolt back in the hole with the nut in (reverse) between the two holes. Get a hammer and hit it until the bushing goes inside. Then the power steering pump should go back in easily
@jaydenoxendine8128
@jaydenoxendine8128 6 месяцев назад
Hey Great video! Could you guys drop the torque specs
@fernandohood5542
@fernandohood5542 2 года назад
Can you tell if the chain is stretched by observing marks?
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
I know I couldn't, but there may be some specifications out there you could measure against.
@mrmanbearpig411
@mrmanbearpig411 11 месяцев назад
Is there no need for a cam lock tool on this engine?
@ZOMG1001
@ZOMG1001 Год назад
How many hours of Labor for this kind of job?(when taking to shop) Thanks for the upload
@andrewfaling3786
@andrewfaling3786 Год назад
Can I possibly get all the torque specs for the job. I'm going to need them soon
@thomashollenbeck-pringle5489
I noticed the orange dots moved after the tensioners were placed. Do you have to re align them? Or just at the initial line up?
@lilsavagegod
@lilsavagegod 3 месяца назад
Initial when it rotates everything is in motion
@nenepinolero5427
@nenepinolero5427 Год назад
My 2005 matrix xr has about 600k miles and not noise yet. Start up just fine
@fireyourrocketts
@fireyourrocketts Год назад
Hey man great video, I wish I had it back in 2019 when I did this, at that time I got a CNS timing kit, engine is now ready to go back into the bay finally almost fully assembled with mostly every part replaced new, I have not mounted the AC compressor, serpentine belt, spark plugs and coils yet BUT, when I did the timing I expended an insane amount of time trying to align the marks on the top the exhaust sprocket, VVTI Assembly and the top line of the timing cover as I did it without help; in my case the 2 marks are a bit off, like a hair, less than a mm, after cover and tensioner if I remember correctly the chain would flex in the middle when rotated and I don't know if this is normal and could not find any answers anywhere not even in the dealer; a mechanic then told me a tiny bit off was not going to be a big deal and that the car should start just fine but engines are precise devices; this "tiny bit off" bothers me still even when I put everything back together, I have always struggled with the idea that I did it wrong and now when I am close to drop engine in I keep having nightmares of car not starting and as I watched this video I wonder if it would be safer to just open everything up again and make sure it does align? like better SAFE than sorry kind of thing as it is way easier to do it now even with the transmission already assembled the whole engine is sitting in a hand truck, not on the hoist just yet; I followed mostly all you show here, I believe I tried to line up chain with marks all at same time, not marks first; I don't remember holding the camshaft with the wrenches or maybe I did just one? its been long time, like I said, lot of time invested in this and wondering to get it wrong? plus I opened the VVTI which was full of sludge and expended 4 hours alone with that part cleaning throughly and reassembling as my original issue was gasket failure due to oil starvation. In the VVTI I had to replace one bolt. The engine does not have any oil in yet so everything is squeaking clean on it. This here shows it is possible to do this in an hour maybe couple of hours since everything is at hand, I do not think I need to get the intake manifold and exhaust out, only alternator and power steering pump in my case besides what this video shows. My other worry besides the timing is I used standard bearings and pistons/rings even the block was rectified, crankshaft was lightly turn to "clean it", cylinder walls were deglazed and the head was done by a specialized shop; I fully do not understand when or why to use 0.10, 0.20 etc, I am a little lost when it comes to engine tolerances so I used standard and wonder if this all would work at all, remember I am NOT this type of mechanic, I work in electro mechanical engineering for retail and financial institutions; pretty close without the grease and dirty mess and that is the only reason I started this project to fully restore this 2004 Toyota engine that have been burn out twice; the mechanic's prices were very expensive so I just got me the tools needed and parts and took under it myself, learning something in the process; giving my scenario; do you think I should revisit the timing or should I keep going?It kind of sucks to go do it again when everything is almost ready but it would suck even bigger to after all this time effort and money expended to have the car not start and having to pull the engine apart again. Need help, or encourage or both, LOL. thanks for this video!!
@starwarsman05
@starwarsman05 Год назад
pretty sure its a non interference engine. lol just try and start it up bud wtf
@buddymullins4477
@buddymullins4477 7 месяцев назад
Hey I have all of the torque specs for doing this change but I can't find specs for the exhaust gear
@bobthrasher8226
@bobthrasher8226 10 месяцев назад
Why are you changing the chain? How do you know it was bad? I heard if the colored links on toyota are still visible the chain is good.
@jasonalexander6417
@jasonalexander6417 9 месяцев назад
Great video. That engine looks neglected though. Hopefully it doesn't burn oil.
@philliptaylor5981
@philliptaylor5981 5 месяцев назад
Do a 2GR-FE please! Thanks!
@abdirizakyahye9358
@abdirizakyahye9358 7 месяцев назад
😮best
@harpomarx7777
@harpomarx7777 Год назад
Do you have to drain the oil? Do you have to drain the coolant? Do you have to prop up the engine when the engine mount is disconnected from the block?
@nftandrej5311
@nftandrej5311 Год назад
yes otherwise coolant will splash when taking out the water pump and better to drain the oil too
@nadakeenr7715
@nadakeenr7715 Год назад
what do you have to do to damage 1zzfe?
@andrewschalk7344
@andrewschalk7344 Год назад
The torque specs given for the timing chain cover don't have the corresponding drawing. It lists different torques but I don't know which bolts are which, for example which is 10 mm head bolt A?
@dawn864
@dawn864 2 года назад
Is it easier with motor out
@darianmackmer5444
@darianmackmer5444 Год назад
After doing the timing it seems like everytime I turn it over the intake side does that click to reset, I’m assuming it not normal any input? I’m doing it how it’s showed😰
@donaldhiggs2075
@donaldhiggs2075 Год назад
I've got 340,000miles on my 1zz-fe vibe motor and haven't done the timing chain yet but it's on the list for this summer. Just did the valve cover gasket today. It was leaking oil. But the car still goes 8k miles between oil changes before I need to add any oil.
@thomasjones1369
@thomasjones1369 Год назад
Wow, thats amazing. My corolla goes about 600 miles before its burned a whole quart 😔
@roshi98
@roshi98 11 дней назад
Are you sure it's not just the timing chain tensioner that needs replacement?
@brbroberts1
@brbroberts1 2 месяца назад
If you rotate the engine counterclockwise after installing the timing chain tensioner, the pressure from the chain will compress the tensioner and release the hook.
@jamesariwo6838
@jamesariwo6838 Год назад
what are the signs that shows timing chain is won out?
@l.c.9596
@l.c.9596 2 года назад
nice video, can you send me the bolt specs. thanks
@annabellsilva5296
@annabellsilva5296 10 месяцев назад
usually when I do it timing chain myself. I put all the marks before I take the timing cover off and then I confirm all the marks when I take the cover off
@fernandohood5542
@fernandohood5542 Год назад
My tensioner is not going in all the way. How do I relieve the tension of the chain on that side? (21.50)
@drmikeosgood
@drmikeosgood 2 года назад
I have an engine of the same size and model and need to do the same job you just showed. Please I do need the torque spec. for this job. Also, can this be done with the engine in place? I do have jacks and full tooling equipment. I sure hope to get the torque settings from you...I did also order the same kit from Amazon. Thanks.
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
Hey! Look in the description of the video, all the torque specs are there. Hope that helps!
@kbengson9163
@kbengson9163 4 месяца назад
I know you have completed the job by now but for future reference if anyone wants to know, Yes, this job can be done with the engine in the car.
@christopher4692
@christopher4692 2 года назад
Would these parts also work on the 2zz-ge motor?
@MN2_Kevin_Hill_1970
@MN2_Kevin_Hill_1970 Год назад
No they won't. Different engine
@richardpassmore5331
@richardpassmore5331 9 месяцев назад
Would love the torque specs please
@JonnyAutomotive
@JonnyAutomotive 2 года назад
Do you need to hold both cams when turning crank to 12 o’clock ?
@nftandrej5311
@nftandrej5311 Год назад
no
@mylespavel4159
@mylespavel4159 Год назад
Actually as a young automotive engineer i get well prepared to de working on timing and i am seriously looking forward to working as a mechanical engineer
@egotist111
@egotist111 28 дней назад
Does anyone know if there is a timing camshaft locking tool?
@timAllen-yk5sz
@timAllen-yk5sz 24 дня назад
Can you please sent torque specs for 2009 Toyota Corolla S 1.8 L engine timing chain replacement torque specs
@user-ip7fz2tk9o
@user-ip7fz2tk9o 4 месяца назад
What causes oil pump failures?
@fireyourrocketts
@fireyourrocketts Год назад
Ok, did this again, now I am even more confused, before I was off a hair on the top marks but now with mark top and bottom perfectly aligned the chain marks do not align at all on top!! so to be clear, if I align the 3 marks with the bottom TDC when I put the chain aligned with the mark on bottom the top is OFF! why?? in the video here there are cuts so we can not see how to align the top for the chain to fit perfectly, after you show the alignment interrupted by a cut, then I can see the chain aligns with the sprocket marks but the marks ex and VVTI are then off??? so how exactly this gets done??? on the bright side at least I am not dropping in the engine until I resolve this mystery out of my lack of knowledge.Thanks!!
@visulesinyangwe1994
@visulesinyangwe1994 Год назад
Hello sir? I am having trouble to start a 1zz engine its cranks but wont start no blown fuse spark is there tries to start but wont pickup. Wat can be the problem pliz help
@tariqhanley357
@tariqhanley357 2 года назад
What’s all the torc specs
@banquetoflaughter3753
@banquetoflaughter3753 Год назад
Wish I can get connected to buy Engines from your company?? Can that be possible?
@benmototechnic2185
@benmototechnic2185 Год назад
Intrested can i train with you friend's im in Kenya Africa
@rigobertoguedez1052
@rigobertoguedez1052 9 месяцев назад
Hello friends, I have a Corolla Sensation and I have a problem with certain areas of the engine and I'm going to repair it but I don't know the torques but watching your video about changing the chain they commented that if we wrote to them they would send the torques, is it possible that they would send them to me? thanks a friend from Venezuela
@pedrogonzalez9943
@pedrogonzalez9943 Год назад
What is the interval to replace the timing chain on that engine? miles? years? can it be done with the engine in the car?
@roshi98
@roshi98 11 дней назад
For this particular engine? There is no required or recommended interval. If is has been properly maintained and driven as the A-to-B car that it is that chain should last for the life of the vehicle. Any chain slap that might be heard can usually be resolved by replacing the timing chain tensioner, a simple 10-minute job involve two bolts and a little rotation of the crank shaft.
@Devin_the_mechanic
@Devin_the_mechanic Год назад
What are the specs on torque
@JRivasERivas
@JRivasERivas Год назад
Necesito ese motor. Y también varios asesoríos...
@ericwoody22
@ericwoody22 2 года назад
Is this the replacement engine or the donor?
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll 2 года назад
This is the replacement. Just making sure timing is good before putting it together
@0flyswatter0
@0flyswatter0 Год назад
Also common engine in Toyota Avensis 2003-2008 (European model)
@Pallidus_Rider
@Pallidus_Rider Год назад
1ZZ-FE !!!
@johnnyb653
@johnnyb653 Год назад
Could I get a copy of those torque specs for everything in the video? Thank you in advance!
@ChadWilliamsFixesAll
@ChadWilliamsFixesAll Год назад
Should be in the description of the video.
@johnnyb653
@johnnyb653 Год назад
@@ChadWilliamsFixesAll so they are, I guess a little reading goes a long ways. Thank you for the help, great video by the way!
@dalehorsley1831
@dalehorsley1831 2 года назад
What is the torque for the water pump bolts
@joshpiotrowski3487
@joshpiotrowski3487 Год назад
88 and 96 INCH pounds. The bolt on the bottom leftmost and two away going clockwise are the high specs, the rest are low spec
@aubreyhawkins9946
@aubreyhawkins9946 4 месяца назад
Guys where did they put the wrenches on the camshafts to hold them still
@kbengson9163
@kbengson9163 4 месяца назад
@aubreyhawkins9946 The exhaust side, from left to right cyl #2, just to the right of the bearing cap bolts and on the intake side (closest to the front of the car) just at cyl #1 (been awhile so I can't remember if it is just in front or behind the first bearing cap bolts.
@nicholassalyards6927
@nicholassalyards6927 2 года назад
Torque specs please
@upset_elcor
@upset_elcor Год назад
on a scale of one to ten, how hard do you think it would be to do this with the engine still in the car? I know it isn't the best idea but I don't have the means to pull the engine, and my chain is stretched.
@BillyBobBigFoot
@BillyBobBigFoot Год назад
You have to remove the motor mount. Jack up the engine so you can remove the 17 mm pulley tensioner bolt. Might need to remove the intake manifold to remove the alternator bolts. Remove AC compressor remove power steering . Drain oil. Drain coolant. Remove engine mount bracket. Remove water pump. Remove timing chain cover. You save time from not having to remove the exhaust, heat shield, wheels & axles, transmission fluid, radiator fans, wiring harness, ecu, airbox, brake calipers, and the hassle from removing the engine out the car.
@keeganh.4814
@keeganh.4814 Год назад
Did ya do it? I'm just starting mine and it's become more than a weekend project 🤣
@andrewschweickert8334
@andrewschweickert8334 Год назад
Hope this helps you two, but I did it in the car. The labor hours if 5 hours, this is continuous work no breaks and no hitches like stripped bolts. My process was to drain oil and coolant, remove the cruise control, take off the serpentine belt and tensioner, pull the alternator, water pump, ac compressor, engine mount, power steering bolts, then valve cover. Then I got to the timing cover which can be a pain. I reverse the process to replace.
@roshi98
@roshi98 11 дней назад
@@andrewschweickert8334 Yep. And there's almost always a stripped bolt.
@albertagueros5495
@albertagueros5495 Месяц назад
I HAVE A 1.8 VIBE MY PROBLEM IS THE OIL PRESSURE AT START IT'S AT 75 AFTER TEN MINUTES IT FALLS TO 1 PSI I CLEANED THE SCREEN TUBE 3 TIMES AND OIL FILTER TWICE BUY NO KNOCKING IS THERE ANY OTHER SCREEN
Далее
МАЛОЙ И РЕЧКА
00:36
Просмотров 108 тыс.
What are Yellow markings in Toyota timing chain
8:47
2002-2008 Toyota Corolla Water Pump
11:18
Просмотров 3,7 тыс.
Новый Mercedes G63 AMG 2024 #aleksey_mercedes
1:00