Amazon Link: a.co/d/1xZS0Hv Here's a complete install of 2 inch wheel spacers on my Kubota BX2380. This video contains step by step instruction and details on what size sockets to use plus torque specs for tightening lugs.
I have a LX3310 Cab kubota tractor and I had the dealer put the spacers on. Glad I did. I also have a ballast box and my tires are loaded. I tipped a new holland tractor with no spacers. I bought a L3240 kubota that I almost tipped and I ended up going back to the dealer and had a curtis cab put on along with the wheel spacers. Wheel spacers work. Better to be safe than sorry. Nice video by the way.
Have a set of these in my BX23S and it made a huge difference. As well it makes it way better when you’re running chains in the winter. Thanks for the video Sam. Cheers, Mike.
I've never used chains but to another point, the only time I don't recommend ballast is when plowing. I want as much weight as possible on the front tires for steering 🤠👍
Sam, another great video! I put the Bro-Tek spacers on my BX2680 within months of getting it in 2019. It made a huge difference with the uneven terrain. I also use wheel weights, and with the loader, suitcase weights on the back. With the spacers and proper ballasting, you can do a lot of work with the BX! Thanks for all the great content!
I can tell you that my box blade with 4 of the 42 pound suitcase weights on the cross rails still isn't enough when I use the pallet forks. I ordered a ballast box for my BX2680.
Good morning Sam! That was a nice quick easy install. The wheel spacers are a great safety feature as long as you respect the rear ballast as you mentioned. Stay safe!
That's what she said 😆😆 I have spacers, 72lb cast iron weights, and fluid filled tires on my JD1025. It rides so much better with all 3 than it did stock. 👍👍
Absolutely! I remember the very 1st day I operated my BX. I tried to lift the end of a small dead ash tree and the tractor had a surprising amount of strength but the rear end was ready to come right off the ground. That was way before I knew about ballast 🤠👍
I put spacers on after adding a canopy that I got from my dealer and was heavy enough it made my bx more unstable because the center of gravity changed, the 1.5" spacers made a world of difference! Stay safe and have fun!
Great video, Sam. Again. Thanks for stressing the importance of counterweight on a tractor. The combination of counterweight and wheel spacers really makes a sub compact tractor much safer. The only thing is for all of us to remember is to not let it give you a false sense of security, alway be aware of the tractors' limitations and the terrain.
You make a great point about the tractors' limitations. It's a sub-compact. It does an awful lot for such a small machine but there is a safe range to operate it 🤠👍
I put 2” on the rear and 1.5 on the front. You have to reset your wheel stops if you’re running a mowing deck. sorry I’m not going cheap when it comes to my Safty. I bought wheel spacers from bro-tec that are made for the tractor from billet aluminum not cast. They are worth every penny!!
I really like what they've done for the stability of the tractor. I have a 60" mowing deck and they don't interfere with it at all. The ones I bought have a good reputation. I hope I don't have any issues 🤠👍
GoodMorning Sam, just a word on safety, You should only use sockets made for impacts, regular sockets can come apart while using an impact. Great video though!
I don't have spacers on my BX2680, but thinking about picking up a set. I ordered a ballast box the other day, its supposed to be here tomorrow. The roto-tiller and the box blade aren't heavy enough to really work as proper ballast when using the loader....more of an issue with the pallet forks.....when I pickup the pallet that my roto-tiller is stored on, I add 4 of the 42 pound suitcase weights to the cross bars on the box blade, and even that its still a bit sketch when the tractor hits a bump. There have been several times where I'd had to just drop the loader to the ground to keep from tipping over....so wheel spacers and the ballast box are kind of a must I think.
I have 500 lbs of ballast on my 2380 almost all of the time. I also add tools, chains, straps, etc, so it probably ends up close to 600 lbs. That's the only way I'll do any serious lifting with my loader. The spacers really made a big difference. I am very impressed 🤠👍
I just went through a week of controversy in a BX facebook forum, asking people to PROVE 2" spacers make any difference. I got a lot of flack from people saying "it feels more stable". But to me, considering physics, I DO NOT believe the actual tip angle is significantly different. On flat ground, maybe people believe the BX rides better, but slopes are the real issue.
I'm on that same Facebook group. I keep saying it. No matter how wide of spacers you use, if you don't have proper ballast and the rear end comes off the ground, spacers don't do anything. I was surprised at what effect they did have, BUT I always use proper ballast. Ballast is way more important 🤠👍
great video. I get the spacing part but the part that confused me is the distribution of weight relying on the wheel studs. while the wheel the hub is connected to spacer with the 5 or six lugs, the entire load is back on the two wheel studs.
I can’t find you the link that shows the actual part number that you ordered. Could you please provide that? thank you. Is 2 inches the widest you can go if you have a mid mounted belly mower?
I have a 60" mid mount mower and 2" spacers is about as wide as I'd feel comfortable with. Here's the link: EZAccessory 2 Wheel Adapters... www.amazon.com/dp/B009AEOFAS?ref=ppx_pop_mob_ap_share
You'd be surprised. It's only 4 inches. I have a narrow concrete ramp between work areas and I still squeezed through. She's still pretty nimble and a whole lot more stable 🤠👍
Great question. I have a 60" deck but I bought a zero turn so I haven't needed to put the deck back on yet. When I do, I'll be sure to do a video on it. Thanks for the idea 🤠👍
The way you pulled those tires off leads me to believe you do not have liquid ballast in your tires. Why not? My dealership highly recommended it and dissuaded me from installing spacers. I see lots of RU-vidrs installing spacers, but also hear Kubota dealerships saying it’s not good for the tractor.
I would like to fill my tires at some point but I have about 500-600 lbs of ballast on the back which is plenty. I feel pretty confident the spacers won't cause any issues because Kubota offers them as an option. I don't think they would sell something that would damage their tractor 🤠👍
Kubota staff say a lot of things, based on what they do not know, and what they are told. All specifications and limits are there ONLY to protect the Manufacturer from Warranty and Liability claims.
Let's be nice about it but many new tractor owners don't realize the importance of proper ballast. That's why I emphasized it. Spacers do add stability along with proper ballast. It's just good information.
Seriously? How many of your high-school classmates excelled in math, geometry and physics? I am a dumbazz, but was still top marks in my classes. I was also top student in 10 month auto repair courses, but graduated feeling quite inadequate. Also remember, if you believe you have average intelligence, 1/2 of the population is dummer. LOL.
