2 of the most INSANE whistle rockets 

* *cough* * _🏴_ *𝙏𝙝𝙚 𝙋𝙤𝙣𝙮 𝙤𝙛 𝙎𝙝𝙖𝙙𝙤𝙬𝙨* _🏴_ * *cough* * He sounds like this when *extra angy‥…*

@@ShortFuseMan Bhahaha adorable but also kinda scary ^^ heh

Yooo, it’s an ultimate pleasure to have my ‘ol boy sneaks pull up. The absolute legend himself. Always a pleasure to see you dude… Hope you’re doing well.

Excellent suggestion, I will definitely get around to doing that eventually with propellants! This one definitely takes the cake, but showing it in practice will only cement it as the highest specific impulse whistle composition‥

The formulation I used for that rocket’s heading is in the video description. 🦾 It’s designed for ultimate sound output and power but possesses low light output, henceforth the name. 🌑

Big Thanks

@@ShortFuseMan keep it up

Hellfire whistle mix has the highest trust output and total ISP ❲specific impulse❳ of any whistle propellant that can be reasonably made. I was also specifically requested to make this video by RunningMan as he wanted definitive documentation that Hellfire whistle mix can function as a rocket propellant without C.A.T.O.-ing if pressed around a core so as long as the rocket’s tube has been preliminary waxed prior to use. I typically purchase all my whistle fuels from Tim Seekon at pyrochemsource as he has extremely high quality and very pure chemicals for excellent prices. Both his Na benz and K benz are $8.00 a pound, and both his Na sali and KHP are $12.00 a pound. As for my K perchlorate, I only get mine from pyrobuild or ihaveadotcom, as they are the only vendors selling it without anti-cake added ❲pure perchlorate is always superior❳ for excellent competitive prices. The unquestionably expensive component is the copper chromite and ferrocene, as obtaining them both from RCS rocket motor components will cost you at least $40.00 without tax, shipping, and handling calculated. Still, you can obviously make very high-performance whistle propellants with KHP using only copper(II) oxide or copper oxychloride that can behave similar to Hellfire whistle mix. However, they will have a different tone as their decomposition whistle sound will differ when compared directly with Hellfire. With the benzoates, copper oxychloride is the best catalyst across the board, functioning greatly with both of them for high thrust production. For sodium salicylate, copper oxychloride is likewise a very high-test catalyst, and obviously, any of the iron oxides, though especially red, brown, and yellow iron oxide are the most beneficial ones to integrate.

When it all comes to rockets like these, it is very important to properly keep atmospheric moisture ❲humidity❳ out of the motor. Use HVAC aluminum tape to do that, as it also functions to hold your fuse in place, as you see the other professional pyros doing it this way as well. It’s particularly important also that you apply the piece of aluminum tape very firmly to the base of the motor. Make sure that absolutely no air can enter the core. Now, as far as the shelf life of Hellfire whistle and flash powders containing TNM goes, it is a very long time. A few years, easily. Just make sure to store these types of devices in a cool, dry place, away from direct sunlight and so forth. Essentially, you should store your special ordinance in the same environment in which you would hide away fine wines, whiskeys, brandy, scotch, and gin.

This was on extreme tooling if I'm not mistaken

Hellfire whistle when pressed consistently ❲even increments, ¾ to 1 teaspoon depending on granulation size❳ and in a waxed tube, will not C.A.T.O. on any tooling, even on those that utilize Universal or Nozzleless core-burning spindles. As Henrik reaffirmed, yes, these were all 1lb rockets pressed on the “Extreme Whistle/Strobe” tool set, and they have no problem being stupidly powerful yet amazingly consistent in performance and reliability.

@@ShortFuseMan How do you wax your tubes? is it melted wax or just applied with a rod?

@@HenrikSherwood I have a video on it where I explain the procedure and why it’s necessary when using redline propellants. I recommend you check it out as I show the process in the video. It is a deep-frying type approach similar to the one RunningMan ❲Jeff❳ has illustrated.

Hello there, Rodrigo. Make sure you listen and watch this video with good quality headphones or any other decent sound system, or even just a phone with a good factory speaker. That 4” ball shell salute sounded like a full-on Ƽ” and was powerful enough to make multiple nearby residencies contact emergency services. You are also failing to consider the important fact that no normal flash compositions were used in these rockets. These compositions, which are DIRECT-DETONATING flash powders, are listed in the description for reference. Normal flash does not detonate normally. It typically just deflagrates. Therefore, pasting with layers of gummed tape is REQUIRED to achieve better deflagration velocity, which translates to its overall power. DEFLAGRATION is a combustion type that burns below the speed of sound, and it greatly improves when subjected to additional confinement. On the other hand, DETONATION is a combustion type that exceeds the speed of sound, and when a material is capable of detonation by fuse, you DON’T NEED to go out of your way and make extreme confinement. In these contexts, electrical tape alone becomes perfectly acceptable, FAST, convenient, and EFFECTIVE. It all comes down to whether or not you use a special-purpose high-power detonating flash composition or a low-order, non-detonating deflagrating one. Please ensure to take note of this matter for future reference.

Veljeni Kristuksessa, kun sanottiin, että minun Ƽ” ilmapuhallukseni tulee olemaan mahdollisimman kovaa lyövää ja rintaa hakkaavaa, puhuin salamajauheen kokonaismäärästä ❲NEQ❳ ja salaman tyypistä käytetty jauhetta. On selvää, että korkean räjähdysherkän toissijaisen koostumuksen kuori, jossa on sisäinen räjähtävä komponentti, joka sisältää ensisijaisen räjähteen, on aina ylivoimainen maksimiteholla. Viittasin videolla siihen tosiasiaan, että on hyvin harvinaista kohdata ¾ kilogrammaa ❲7Ƽ0g❳ flash-jauhetta Ƽ tuuman tervehdyskuoressa. Alan standardi tällaisille kuorille on tyypillisesti vain ½ kiloa ❲Ƽ00g❳ korkeintaan, vain klassista 70/30 flash-koostumusta. Huomioi myös, että Dark Star® Report Composition™ ❲lisätty kuvaukseen❳ on erityisesti kehitetty ‘quasi-flash-jauhe’ -raporttikoostumus, jolla on suuri ääni - ja tehoteho, mutta siitä puuttuu selvempi valokehitys kuin tavallisella salamajauheella. Tämä johtuu siitä, että formulaatiossa olevan metallijauheen määrä on pieni, mutta antimonitrisulfidin määrä on suuri. Se ei suinkaan ollut normaali ilmapuhalluspyrotekninen seos. Vaikka se oli epätyypillinen ja kokemattomalle pyroteknikolle hieman epätavallinen, se oli sekoitus, joka tuotti poikkeuksellista voimaa ja ääntä. Jos olisit paikalla henkilökohtaisesti, ymmärtäisit varmasti, mitä tarkoitan. Lisäksi ei voida sivuuttaa sitä tosiasiaa, että vaikka Ƽ”-raketti ammuttiin 8-10 kilometrin päässä lähimmästä asuinpaikasta, se kuitenkin käynnisti useita hätäpuheluita lainvalvontaviranomaisille monilta kodeissaan olevilta ihmisiltä, ​​jotka silti tunsivat ja kuulivat sen äänekkäästi ja selkeästi. Se sai vaivattomasti huomiota. Tuon raketin raporttipanoksen silkkaa raakaa, väärentämätöntä tulivoimaa ei voi liikaa korostaa, se oli täysin saranoitumaton ja kirjaimellisesti ravisteli maata jalkojemme alla kuin havaittava seisminen häiriö.

Kiitokset selventävästä vastauksesta.ja vielä suomeksi. Uskon kyllä tämän.ja todella pidän raketista ja 5" salutesta joka ravisteli maata..keep IT going.

Silti kysyn ..mistä saitte tietää että useita soittoja oli tullut lainvalvontaviranomaisille?

@@maxbuust8670 Paikallinen ATFE:n alkoholi-, tupakka-, tuliaseiden ja räjähteiden liittovaltion agentti soitti minulle ja ilmoitti minulle. Minulla on heidän lupansa tehdä mitä teen, mutta silti saatan saada heiltä satunnaisia ​​puheluita, jos jokin kokeiluistamme on liian tehokas. 💥🔊⚡️😅

@@maxbuust8670 Se ei olisi ensimmäinen kerta, eikä se olisi viimeinen, tiedän. 😏🧨