2001 Buick Park Avenue Front Wheel Hubs

Подписаться 14 тыс.

Просмотров 25 тыс.

50% 1

Replacement of Front Wheel Hub on a 2001 Buick Park Avenue
Disclaimer:
Due to factors beyond the control of CharlesAndCars, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. CharlesAndCars assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. CharlesAndCars recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of CharlesAndCars, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not CharlesAndCars.

Авто/Мото

Опубликовано:

7 июл 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@robertoswalt319 3 года назад

Thanks for posting this. I have to replace the bearings on my daughter's car and this helped me understand what I need in order to do the work.

@CharlesAndCars 3 года назад

Glad it helped

@stefanczechorskidds8435 6 лет назад

Finally, someone who likes Anti-Seize !!!!! Thank you. I've watched and done many of these; I've watched some who have spent countless hours (even a weekend) struggling with One bearing / hub and it doesn't seem to dawn on the installer what got them there in the first place (corrosion!) . Thanks for thinking of the next guy. I use it on the bearing surface as well!

@Dave_Diaz. 4 года назад

Thanks for the video, helped me do the bearing on my car 👍

@CharlesAndCars 4 года назад

glad it helped

@bobbyleonard7052 4 года назад

Thank you. This refreshed my memory. I have done this a couple of years ago on the driver side. Passenger side has a little wiggle in it. I noticed when I was rotating tires. Good time to check for play, wiggle. I have a Timken hub coming next week. 55 ft/lbs on hub bolts. Thanks again.

@johnwagner4559 3 года назад

On the 3 hub bolts?

@bobbyleonard7052 3 года назад

@@johnwagner4559 yes.

@markreynolds5665 3 года назад

Thank you for your time to help others.

@Tom-wq2mz 5 лет назад

Great work. Note: This job will apply to Olds and Cadillac. Keep up the great work and videos. My 1999 Cadillac Deville is the same I was looking for a easier way to remove the hub from knuckle/spindle.

@CharlesAndCars 5 лет назад

glad it helped

@barroncoleman 2 года назад

This was very, very, very helpful!!! Next, I'm changing the tie rods.

@CharlesAndCars 2 года назад

Glad it was helpful!

@spkay31 6 лет назад

Thanks for this and your other great videos. I'm pretty confident I understand the steps after watching your videos!

@jeremylay1694 4 года назад

if you leave 1 bolt loosened in the hub you can strike the back with a hammer and it will help you a great deal with seperation.

@dennisgraham9444 3 года назад

These videos coming in very handy Charles!!!

@CharlesAndCars 3 года назад

glad it helped

@ryankraulik7295 5 лет назад

Good demonstration

@davidprice9295 Год назад

Great video - thank you.

@CharlesAndCars Год назад

Glad it was helpful!

@denisepiktetov4540 3 года назад

Excellent job! Great! Thank you!

@CharlesAndCars 3 года назад

Glad you liked it!

@CharlesAndCars 3 года назад

Glad it helped

@michaelmccool5636 5 лет назад

Dude you are a badass!!!

@dennisgraham9444 4 года назад

Ty sir!!

@customcruiserfan2102 2 года назад

Thanks so much for this how-to. I'm curious to know which replacement hub assembly brand you used. Quality seems to be an issue with them, so any recommendation is welcome. Also, where did you put the jack stands while doing the work? Thanks, again.

@CharlesAndCars 2 года назад

I don't remember. Oem is best, but price wise tough to justify many times. It would either be a timken or a moog.

@johnwagner4559 3 года назад

Thank for the information! Question, I noticed that the swaybar has a good amount of space inside the bushing. Mine is like that too and wondering if they're too worn and need to be replaced???? Mine have more of a space then yours too.I know the load of the cars weight isn't on but was also wondering if those bushings if worn, could produce a vibration in the front end at higher speeds? Or for that matter, can worn hubs produce a vibration like that too???? Thanks much! Great work!

@CharlesAndCars 3 года назад

What I've experienced with broken / really worn sway bar links is either a floating or "squirrely" feeling while driving, not vibration..

@johnwagner4559 3 года назад

@@CharlesAndCars ok. Thanks!

@johnwagner4559 3 года назад

I'm doing this and the new hub came with instructions to torque axle nut to 155ft lbs. Gm says 118ft lbs. Which one should I pick? Thanks Charles! Also, at 5:46 and at 6:45 as you turn the steering wheel to get at the 3 back hub bolts, I hear a clicking sound, why?

@CharlesAndCars 3 года назад

Go with what GM Says... The clicking sound is just the strut (unloaded).

@Brian-fo8sh 7 месяцев назад

Great video!! It will help me tremendously this week when I do mine. Question…why anti seize instead of grease? Just curious. Thanks.

@CharlesAndCars 7 месяцев назад

On the splines... either will work...

@Brian-fo8sh 7 месяцев назад

@@CharlesAndCars thank you for the quick response. I’m doing this job in a few days.

@bigblockelectra 3 года назад

I have a 1998. I have a snapped wheel stud. Unfortunately, the shop manual procedure for the wheel stud does not appear to work while the hub assembly is on the car. I really didn't want to have to replace the bearing, but I guess I will do the entire thing instead. The car has 99,000 and the bearings don't appear to be bad. The replacement studs are slightly shorter than the stock studs, but they are just too long to get through the back of the hub assembly. I hope the procedure for 1998 is similar to 2001.

@bigblockelectra 3 года назад

I was able to replace the stud. Luckily I had no issues getting the assembly off of the knuckle. It came right out. Good video.