2003 - 2009 Toyota 4Runner Front Door Speaker Install

Подписаться 130 тыс.

Просмотров 52 тыс.

50% 1

Parts used linked in the description below!
For an updated version of this install, click here: • 2003 - 2009 Toyota 4Ru...
Watch a full tutorial as a 2006 Toyota 4runner will have a new pair of 6x9" Pioneer Coaxial installed on the front doors. Note, we are only replacing the midrange with a coaxial, leaving the factory tweeter in place.
This video applies to Toyota 4runner models for years 2003, 2004, 2005, 2006, 2007, 2008, and 2009. In addition, this install includes how to remove the factory door panel, wire and install the speakers, and testing.
Click here to see the component speaker install w/ tweeters:
• Toyota Tacoma / 4Runne...
Click here to see the speaker unboxing:
• Pioneer 6x9" Speaker U...
Click here to see the rear door speaker install:
• 2003 - 2009 Toyota 4Ru...
Click here to see where we replaced the radio on this 4runner:
• 2003 - 2009 Toyota 4Ru...
Click here where we installed an amplifier and subwoofer:
• 2003 - 2009 Toyota 4ru...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Pioneer TS-A6966R 6x9" Coaxial Speakers (pair): amzn.to/3x2Kac5
*Metra 82-8146 6x9" Toyota Speaker Bracket Adapters: amzn.to/3hiOQnN
--If installing 6.5", use Metra 82-8147 Speaker Bracket Adapters (6x9 to 6.5"): amzn.to/3h9boYa
*Metra 72-8104 Speaker Wire Harness Adapters: amzn.to/3xQDgqB
Note - If you wish to install component set (replacing the factory tweeter), use the following parts:
*Metra 82-8146 6x9" Toyota Speaker Bracket Adapters: amzn.to/3hiOQnN
--If installing 6.5", use Metra 82-8147 Speaker Bracket Adapters (6x9 to 6.5"): amzn.to/3h9boYa
*Metra 72-8104 Speaker Wiring Harness (Pair): amzn.to/3xQDgqB
*2" Hole Tweeter Bracket Adapters: amzn.to/3gX571u
(Optional) - Toyota Tweeter Harness Adapter: amzn.to/3vS3wPN
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases

Авто/Мото

Опубликовано:

13 мар 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@ProvoBeastAudio 2 года назад

Parts used linked in the description of the video! For an updated version of this video, click here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@AmusedKelpie-tc9du 2 месяца назад

I had a little challenge in wiggling the door panel, sliding it in place, aligning the plastic rivets with the holes. With a little patience ,everything worked out. Great video which gave me the confidence to tackle this project. Now the rear speakers are next.

@Thundrwood 4 года назад

Just finished installing new front speakers. This video was very helpful.

@hjoconor 7 лет назад

Thank you, just what I needed. Speaker is blown up front and I look forward to taking on this job myself.

@werd2182 3 года назад

Good concise tutorial, thanks.

@moveslikejagger369 4 года назад

Super easy, the only issue I had was unplugging the big plug on the drivers side

@josiahschwahn3842 3 года назад

Thanks for the video! Just did a part check on amazon and it said those speakers don't fit? Obviously, they do but curious as to why it would say they don't fit. Love the help

@bassingbasics6621 2 года назад

Damnnn didn’t realize I needed the brackets

@MattsTanks 7 лет назад

Thanks! I thought you said those speakers were not very good though?

@johnmckenzie5707 4 года назад

Hi, I used your guide to purchase the 6x9 metra adapters for the front door install on my 06 4runner. While screwing the speakers to the adapters i noticed that the screws arent anchored into the guide grooves in the inside wall of the adapters and once tight are only gripping on the sides of the surface mount holes not making much of a secure connection. I also noticed the same thing happening in your video when you turn the speaker over. Is there a better way to secure the speakers to the adapters that provides a more secure/long lasting connection? Thanks

@doobedi 4 года назад

Mu 4runner didn't come with the subwoofer nor amp but do i need a amplifier for the replace door speakers midrange??

@josem5515 6 лет назад

Would the parts work the same if your stock system was a JBL?

@jfklazarus 5 лет назад

Do you have to take out the pioneer speaker cover?

@eddieangeles13 5 лет назад

Nice

@unodfredy 3 года назад

Hey my passenger side speaker blew yesterday. Is it possible to just change the one side without screwing up the system? I’m just looking for oem sound but the price of one speaker at toyota is ridiculous.

@AllSaintsWhodat 6 месяцев назад

If you have the jbl amp and factory speakers will those speakers still work?

@lonememe 5 лет назад

Just curious if you ever did the tweeter install and made a video? Thanks for this one, it really did help!

@ProvoBeastAudio 5 лет назад

Here you go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4VRgPcl8LlM.html

@ProvoBeastAudio Год назад

Updated version: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@MattsTanks 7 лет назад

Is there a 6x9 speaker that you would recommend? If I could get some that I could could run without an amp that would be ideal!

@ProvoBeastAudio 7 лет назад

Remember that you will also need the speaker bracket listed in the description.

@goprogreatness3136 4 года назад

the other video you did with the nvx 6.5 speakers.... which one do you think sounded better. thanks

@ProvoBeastAudio 4 года назад

NVX by far.

@tmg06d 5 лет назад

What tweeter would you recommend for front dash speaker? Is there a replacement that would be easy to install?

@ProvoBeastAudio Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@Sandr0n 6 лет назад

How about the new speaker hight? Does the door panel sit on top without any issues?

@ProvoBeastAudio 6 лет назад

Yep, no clearance issues. As long as it doesn't sit higher than the factory speaker.

@CorbinAllred 6 лет назад

What tweeter do you recommend? Adapters? Connectors? Thanks!

@ProvoBeastAudio Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@ROTORHEADPR 7 лет назад

i would like to replace mine with a component speaker (crossover and tweeter) do you have a tutorial on this? thanks . great vid!

@ProvoBeastAudio 7 лет назад

Not yet, but very shortly. I have one to do this summer on this same model 4runner.

@ProvoBeastAudio 6 лет назад

Video will be available Wednesday Morning here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4VRgPcl8LlM.html

@ProvoBeastAudio Год назад

Updated version: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@Tenasedeinc 6 лет назад

Is the tweeter still active and what tweeter would you replace it with?

@ProvoBeastAudio Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@greglopez4853 7 лет назад

Do you recommend certain tweeters? I have an 03 4Runner and plan on doing front, back tweeters and possibly the I dash from all your videos this weekend lol you're awesome!

@ProvoBeastAudio 7 лет назад

You can pick up a great component set, Alpines are usually a great choice. For tweeters, you can pick up Type S tweeters from Alpine, sound great!

@greglopez4853 7 лет назад

To go all pioneer, will the ts-t110 7/8" hard-dome tweeters work with that bracket?

@ProvoBeastAudio 7 лет назад

Sure will, these brackets are modify-able, so you can adapt them to generally any tweeter you like.

@ProvoBeastAudio 6 лет назад

Video will be available Wednesday Morning here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4VRgPcl8LlM.html

@ProvoBeastAudio Год назад

Updated version: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@markferris4871 Год назад

This doesn’t work with the JBL system found in the Limited edition 4Runners. There is a small amplifier in the factory speaker spacer and an aftermarket 6x9 doesn’t fit in the stock spacer either. Also the terminals are different.

@taliesinangling3564 10 месяцев назад

Whoa who woulda thought

@Letsrocknroll13 6 месяцев назад

Do you have a tutorial recommendation for Limited 4Runners?

@Blakgun 6 лет назад

I want to replace the stock speakers on my 2006 4Runner JBL system. I believe they are all low impedance - 2 ohm - speakers. I'm sticking with the factory HU for now. Is this even practical? Does anyone make 2 ohm speakers for my truck?

@ProvoBeastAudio 6 лет назад

You could find some, but most aftermarket speakers run at a 4 ohm impedance. It will sound better, but may not be optimal for the factory JBL amp.

@Blakgun 6 лет назад

Provo Beast Audio Installation Thanks. I'll check out Sonicelectronix. Maybe there's a HU I'll like.

@ben380z 7 лет назад

Did u have trouble matching the speakers holes to the bracket holes??

@ProvoBeastAudio 7 лет назад

Nope, speakers lined up with the holes on the bracket fine, however every brand of speaker differs slightly, so you may have to do some slight modification.

@moveslikejagger369 4 года назад

What was the wattage on the ones it comes stock with?

@user-ug9wk7hc7e 3 года назад

My original JBL's were 20w, 2.9 ohm.

@johncortez1599 5 лет назад

I thought the stock size speakers were 6.5 in the 4runner. Do some come with with 6x9 and some 6.5?

@ProvoBeastAudio 5 лет назад

2003+ have 6x9 in the front doors.

@johncortez1599 5 лет назад

@@ProvoBeastAudio Thank you sir. I just purchased some Alpine SPS-610C component speakers, and the 6x9 to 6.5 speaker adapter brackets. My next question is, how do I wire the new speakers up? I've read that the factory plug to the tweeter has both input, and output to the midbass driver in the door...

@tee228 7 лет назад

What's a good replacement mid/tweeter that will fit in place of the stock?

@ProvoBeastAudio 7 лет назад

Alpine Type S component set works like $. Tweeters sound great and you can use a piece of ABS plastic to make a mount to mount the tweeter.

@tee228 7 лет назад

Sounds good. Does it use the same harness as the other speakers?

@ProvoBeastAudio 7 лет назад

Same harness in the video, yes.

@ProvoBeastAudio 6 лет назад

Video will be available Wednesday Morning here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4VRgPcl8LlM.html

@ProvoBeastAudio Год назад

Updated version: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html

@tristanalovelow4246 Год назад

Does it matter if the speaker is 2ohm, 4ohms or mixed?

@ProvoBeastAudio Год назад

It does, yes. Most aftermarket speakers are 4 ohms, and depending if you are running the factory radio, amp, or aftermarket, the ohm load does matter. If base radio or aftermarket radio, 4 ohm is what you need. If you have JBL from factory, you will need 2 ohm.

@tristanalovelow4246 Год назад

@@ProvoBeastAudio Do you know how many ohms the front door speaker factory is? I still have the original stereo and plan on leaving it. I saw another video where they were able to put in a stereo with bluetooth from a different toyota vehicle. Would that work with the 2005 4runner JBL Synthesis System? Thanks for your help!

@tonyalmaraz2828 6 лет назад

Which speaker terminal is positive ?

@ProvoBeastAudio 6 лет назад

www.the12volt.com/installbay/forum_posts.asp?tid=85661

@MattsTanks 7 лет назад

Do you like those speakers??

@ProvoBeastAudio 7 лет назад

It was a customer vehicle, so no, not a fan of them, would have chosen a nicer setup as these were very low end. If you replace speakers, remember, you get what you pay for.

@tee228 7 лет назад

aw man I wish I read this before I ordered those exact same 3 way pioneers.. lol i always thought pioneer makes the best or at least one of the best speakers

@doobedi 4 года назад

@@ProvoBeastAudioi assume they are much better than the manufacturer speakers?

@that98scab94 6 лет назад

Did this 4runner had the jbl synthesis? System

@ProvoBeastAudio 6 лет назад

Nope.

@markferris4871 Год назад

@toshayonguard4253 3 года назад

He keeps saying coaxle speaker but the speaker he is installing is a 3 way not a coaxle.....🤔🙄🙄🙄

@ProvoBeastAudio 3 года назад

Sounds like John doesn't understand what a coaxial speaker is then... Someone needs to do a google search first...

@jacobwarren6841 5 лет назад

Wanted to hear the speakers. If you don't play them you might as well not include the name in the video.

@ProvoBeastAudio 5 лет назад

Do you really think the mic on a camera is truly going to pick up the audio quality you are looking for? If you play the snarky game, i can play that game too...

@mazpr2025 2 года назад

$36,000 SUV with such a POS door speaker set

@ProvoBeastAudio 2 года назад

These speakers didn't end up in this vehicle, they were only "installed" for filming purposes.

@catdaddy119 Год назад

Your speaker choice was garbage but nice video. I wanted to see what it looks like with the door panel off.

@ProvoBeastAudio Год назад

Wasn't our choice, wasn't our vehicle, and video was taken years ago. New updated version is being uploaded soon.

@catdaddy119 Год назад

@@ProvoBeastAudio I'm glad to hear that 😂👍 I just subscribed. I'll be looking at more videos. I've have been in the stereo business since the 80s. Back in the Circuit City days installing those 2 knob cassette playing Kenwood head units 😂

@ProvoBeastAudio Год назад

@@catdaddy119 Here is your updated video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pWlas9XQpP8.html