2003 YZ125 UFO Restyle Plastic Kit Install 

YES YOU FINALLY DID IT!!! So stoked for you! can't wait for the dope vids!!

Was literally going to tell you to get a set! On top of the game bro✊🏼

Leave a like for the restyled 125!

Wow what a difference! Bike looks 50x better

love it can't wait till it's all the way finished

I like it! Good video and really enjoyed the beat in the background

Literally best speed for this type of time lapse 👌

The 125 is looking so fresh deeo!

Awesome DeeO!

Nothin makes you wanna ride the old 2 stroke more than hookin it up with a full replacement of the hand controls and some updated plastics. The no graphics look is actually fire right now. You got potential for a sick graphics design with the red accents you already have on the seat cover.

That YZ looks so much better now Deeo! ;)

ReturnOfDeeo the ziptie is for the peice on top of your front number plate (the bit that curls around the bar) there should be a little hole that it goes through just ziptie it together.

@991 for that stuck / stripped Phillips shroud bolt: very carefully use a Dermal tool to make a slot for a screw driver you have. (I'd touch up the driver edge so it's not rounded at all). Then spray the back side as best you can with penetrating oil. Leave for two days and spray again, leave for a day then come back and take that bolt off. Hope you can get the shroud off.

Same with my yz250 had to kinda bend the front number plate to fit and run bolts through it but It worked

they look sweet!!!!

Sick dude

If u want the shrode off. Take a drill with a small drill bit. Drill carefully into the center of the stripped screws. Drill halfway in or so. Reverse the drill. The screw will back out. You will b able to replace your gas tank shrode. That technique works every time. I have successfully done that on my quad with bolts and screws too.

Love the bike man. I got the same kit on my bike

To tighten the sprocket nut. I take the bike off the stand and put it in gear (back it up into a wall if it still rolls) and use a large crescent wrench. Bike looks sweet 🤘🏻

My radiator shroud for some reason won't align with the radiator so I can't put in the bottom screw. Any advice?

that's awesome i didn't even know they made a restyle kit! i always just did what you did with just the front fender

going to watch this on my lunch. thanks for the entertainment 😸

Was looking to do this for my yz! Definitely gonna have to do it it looks so sick. Had the same exact problem with my shrouds to had to break them off I believe lol

Deeo I have a steel frame yz what paint were you talking about on the frame

Nice sound

hey deeo I love your videos and I think the zip tie is for the flappy thing on the number plate

hey deeo , do you have any tips for getting the 2 smoke residue off of the back number plate next to the exhuast ?

"Everywhere we go" by sonreal 6:19 Good music taste :)

hey , was wondering where you got your seat cover from ? can only find them with blue strips for the yz

Dunno if you ever got the screws out of the gas tank, but my '05 yz125 did the same exact thing before i put restyle plastics on it. The screws that hold the shrouds on thread into metal inserts that the gas tank plastic is then formed around when it was manufactured, but unfortunately it was a poor design because the torque of the screws causes the metal inserts to spin within the gas tank plastic. Fortunately, it's not too hard to get out once you realize this. I just pried up on the shroud with a flathead that i slipped up behind it real close to the screw, and while applying a prying force to it, I twisted the screw with a power drill for a minute or 2 until the inserts that the screws were sorta seized into clawed their way outta the gas tank plastic sockets -- which are dead ends btw -- that is, they don't go through to where the fuel is. Just packed in some Loctite Repair Putty and stuck the inserts back in and let it cure overnight and they've held tight for 2 years now.

I remember watching the video where you cut the fenders. made it look a lot better.

she looks so much better

yeah my 05 yz didn't fit an 08 yz front number plate so I did the top bolt and zip tied the bottom 2

I have a 04 YZ125 with big bore kit. to 150cc but I wanna do new plastics what year will fit with little modifications ill have to do for them to fit on bike. I race desert and right now I race my 06 YZ250 full moded but I miss racing my 125 so I wanna do a full rebuild from bottom to top. I've already rebuilt the engine and everything else just need to put new plastics and wait for my new Excel pro black rims with gold tusk hubs & gold nipples just waiting to get done being chew with new heavy duty black spokes for the desert cause regular spokes go by fast out in the desert do to all the rocky conditions we have to race in. Just got my new IMS desert tank with dry brake for quick fill, IMS pegs and works connection skid plate. I'm thinking of doing a LED light bar setup for when I race Glen 24hr and other night races but need to find mount online or fab and weld one up myself. Bike has huge part list from Pro Circuit pipe & silencer & full suspension, Renthal bars & spocket & chain, Boyesen full clutch kit & spectra aluminum cover & water supercooler. Fully rebuilt & jeted carborater with all new fuel & oil hoses. ASV break away levels & new throttle and clutch cables. But still have things I need to get hand guards, grips, anodized gold bolts for whole bike, new seat with factory effex seat cover with ribbing, MSR chain guide, front sprocket guard, Acerbis frame guard with grip, Maxxis maxxcross desert rear tire & Maxxis desert IT front tire, radiator and hoses, radiator guard that with save your life in the desert trust lol if anyone out there is selling a stock seat I can refoam and shape out for myself hit me up asap please. but please anyone that knows what the newest year plastics I can fit on a 2005 yz125 with little modifications hit me up asap as well please will be greatly appreciated. also if you know 2006 yz250 new plastic that will fit that will help to cause mite rebuild that bike after to sale for the new yz250x which is a fuck monster for the off road and desert sense!! if you guys could help me out that would be very cool as hell!!👍👍👍💸💸💸💵💵💵💰💰💰🚬🚬

late af but man I have a 2012 yz125 and I'm looking to buy a 2016 plastics. do you think they will fit?

I just got the white cycra restyle for my 06 yz125

On my kaw the front number plate did the same I used a zip tie to hold it in

i have my 2011 kx250f i thought about doing the 2012 450/2013+ 250f plastics witch would involve a 12+ 450 airbox and then all new plastics some zipties a new seat and a bracket or a newer gas tank for the shrouds.i also thought about getting a yz125 with the alum frame aka 05+ as a second bike

Where did you get the works pipe?

i knew something was up when u didnt show the whole bike on your snapchat😂

Hey Deeo. Any luck with the gas tank shrode on th yz125? I wanted to say that I joined your rmfantasymx group. When i entered your group. I was 181 for entry. It will be fun to play with everyone. Aneheim 1 on FS1 at 9:30est., 6: 30pst. I can't wait to watch it. Have you made your picks for fantasymx.

My shrouds were also permanent on my tank, we got a torch, and cut the old plastics with a knife, heat up bolt, and pull it out, there is an insert with inner threads in tank it can come out, if you have any questions just ask!

What kind of year do the graphics have to be to fit the restyle kit?

DeeO! You should get some black rims. And a new exhaust system!

What settings do you run your gopro on when you ride? I just got the proshot btw.

Hi friend, I'm from Brazil, and I need to ask a question. I have a YZ 125 2002 I want to leave my bike just like you! This plastic kit is it special?

whatta bummer about the shrouds man. still looks great though!

for the front number plate you have to zip-tie the holes together (hence the zip-tie in the kit). I personally don't love the restyle kit. I put on the 2016 plastics for the yz's onto my 2003, and only used the restyle side plates on mine.

Would you ever do the retro look on the YZ? Just an idea.

+returnofdeeo what silencer do you have on your 125

Would it come off if u took a rubber band and put it in the bolt and use the rubber band as if the screwdriver was bigger

the rtech revolution plastic kit comes with a tank but the hole kit isn't cheap at all lol

Does anyone know if this restyle kit only works with the alloy sub frame 125s?

I’m trying to get a set for my 99 but can’t find any, u might have an idea of who might have em?

The ziptie is for the top piece that goes around the bar pad

Where did you buy those spoke skins?

Nooice!!!

Nice gaerne boots!

the zip tie is used for where number plate wraps around the bars. I did this same project. I just epoxied the number plate to the triple clmp

Hey bro I have a 2001 yz125 and I’m on a mission looking for a restyle kit for it... do you know of any that work?!

My 02 yz250 left shroud is stuck and it rly pisses me off

Hello 2s brother, where can we order that rear fender and side cover of your YZ125. Watching here from Phillippines

Hey DeeO what was the shipping time for the plastics?

Hey DeeO I was wondering if I could have your old plastics I have the same bike and its the same year.

Where do you order graphics for these kits

Is that a plastics to YZ 125 2006 ?

I think the spoke skins would look decent on the 450 with the red graphics

you can get the cycra stadium plate, they just zip tie on

Does the kit come with new bolts?

What years have the permanent shroud

Are you getting graphics

zip tie the front number plate??

Is daddy deeo going to ride again

What year is the yz?

I thought deeo was drunk in the beginning😂

I knew it 😉

There's something I just realized. Ur 125 is the same age as me and ur 450 is the same age as my brother

Does it work with ttr125?

If u have a 04 2015 plastics bolt right up

Where can I buy those plastic

What is your kit deco ?

Get some graphics that match your 450

i have the same bike and same plastics and i live in pueblo

Deeo is faster on the yz than on his 450

How to order

Can you send me the old plastics and spare parts you wont use

Front number plate has a zip tie because the kit don’t fit

that thing needs a rebuild

perfect timing on the video work was getting boring lol

How much for the 125 I got 3k in cash and how could I get ahold of you

it looks like a 450 a bit now

MY REAR FENDER IS PISSING ME TF OFF I HOPE THIS SHIT HELPS

a restyle kit? that's newer plastics for older bikes?

it looks like it needs a new tire pretty bad.

Hand guards are 👎. Looks good though 😄

Id love a 125 but i dont think im tall enough, im only like 5' 7 :(

I was planning to get a ktm 125 bug you might have changed my mind! Looking at that yamaha i might stick with #bLUcRU

Your pretty weard

Just put grip tape all the way up the frame.

i didnt unsubscibe but i just had to resubsrcibe, smh WTH is youtube even doing