No video :(

2004-2008 Ford F-150 Zone 4 Inch Lift Kit Install

Подписаться 85 тыс.

Просмотров 154 тыс.

50% 1

Grabbing a high-quality and extremely durable 6" lift kit doesn't mean you'll need to take out a second mortgage, and saving some money on a lift doesn't mean you'll end up with a lift system that's made out of paper. Our friends over at Zone have managed to put together one of the most balanced 6" Lift Kits for the 2004 to 2008 F150s on the market today. This kit comes loaded down with high-quality and extremely tough components that can handle just about any application you can get your truck into, all while giving you the ride height you need to clear up to 35" tires on your aggressive 4WD F150 build of choice. Zone's kit comes with a complete pair of taller front shocks, crossmembers, lifted knuckles, differential drop brackets, larger rear blocks, a choice of standard or performance rear shocks, and all the other hardware and instructions you need for installation.
www.stage3motor...

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@staticsix1 8 лет назад

goddam 10minutes where you guys located need that for my truck

@stevenbuckner2432 9 лет назад

What size tires did you use? Also did they rub at all?

@kenni411 6 лет назад

this looks like it is a permanent install , no going back after cutting the frame unless you weld new plates

@stage3motorsports 6 лет назад

Correct, this is a pretty permanent install

@bryanc447 5 лет назад

Am i the only one that believes that if you move up to a bigger wheel you should have more of a - offset

@brandone6252 2 года назад

Hell I went to a -44

@elplevonrooo395 5 лет назад

What about the rack and pinion???

@Tlloyd56 7 лет назад

Stacked blocks?

@echo1er 9 лет назад

so @3:16 you don't have to torque to specs. Just curious I'm not a mech.

@rippstam 4 года назад

3 uggas is enough, 150 ft-lb is probably enough for those bolts. Something like that isn't as critical as the leaf spring U bolts or the hub bearing. I'm not saying they shouldn't be torqued, but the impact is good enough as long as it is working properly.

@toogood131313 7 лет назад

Roush or a K&N intake for a 2007 f150 fx2 sport

@Vanni_x 6 лет назад

Help Hey, I have a question, I have an 2010 f150 lariat 2WD and I lifted 6 in and I’m having a problem with the traction control light because when I turn left or right it flashes the light and stop the truck. The shop told me that I need to update the tire size at the dealer to stop the issue. Do you think it will solve it??

@Masterman5010 5 лет назад

UNKNOWN -BATM- Aounds like a wiring issue of some sort, wires might not be long enough

@dirtybauer7022 4 года назад

im late but it sounds like the ABS sensor on the hub isnt lined up with the magnetic strip.

@fitter5426 6 лет назад

What’s it typically cost to have a lift installed?

@brandone6252 2 года назад

Sit back an look at what they did get a buddy to help you an be proud you did it

@hugoreyes1051 4 года назад

What is the size of the rear blocks?

@stage3motorsports 4 года назад

These rear blocks are 3" tall learn more over on the product listing on our site - www.stage3motorsports.com/F8-2004-2008-F-150-4WD-Zone-Offroad-4-Lift-Kit.html

@hugoreyes1051 4 года назад

Thank-you for your anwer. So it is 3" blocks stacked on top of the 2" factory ones, then is 5" total lifted on the rear and 4" on the front is that correct? Can the rear blocks be replace for a single 5" piece instead of having two stacked? Thank-you very much for your time I really appreciate it.

@pablotrejo8777 Год назад

Did you just cut part of the frame ? Lmao

@divineperspective8940 Год назад

Torque spec ugghha dougga

@hotrocketdj 7 лет назад

Definitely not going to be for a show truck... at least I hope not. All the old dirty rusted parts and rusted bolts were just put back on to the new shiny parts.