2005-2023 Tacoma Rough Country 3.5" Suspension Lift Kit Review & Install

Подписаться 25 тыс.

Просмотров 26 тыс.

50% 1

Take Your Truck to New Heights. This Rough Country 3.50-Inch Series II Bolt-On Suspension Lift Kit with Premium N3 Shocks and Rear Leaf Springs will increase the ground clearance, while maintaining factory ride quality. It will level the front with the rear of your Tacoma and comes with an amazing amount of features.
\What's in the Box? With this lift kit, you get the rear shocks, 2 forged aluminum upper control arms, loaded N3 struts, rear leaf springs, vertex adjustable coil-overs, differential spacers, u-bolts and all the installation hardware you'll need.
Warranty. There is a lifetime replacement warranty on the system and 3-year warranty on the shocks.
Application. This Rough Country 3.50-Inch Series II Bolt-On Suspension Lift Kit with Premium N3 Shocks and Rear Leaf Springs fit 2005-2023 6-Lug Tacomas. terrain.jp/3SMQhiq
Intro - 0:00
Features - 0:51
Construction - 1:46
Price - 3:13
Install Difficulty - 3:56
Full Install - 4:16
Item TT14589
----------------------------------------------------------------
🎞Subscribe for More Toyota Tacoma, Tundra & 4Runner Videos! : bit.ly/2FtUeUw
Facebook: / extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your off-road outfitters! We carry a giant selection of aftermarket off-road accessories for whatever rig you're driving! With FREE 2 or 3 Day Shipping on over 10,000 products and the best customer service in the industry, we have you covered!
www.extremeterrain.com
#tacoma #tundra #4runner

Авто/Мото

Опубликовано:

29 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@ExtremeTerrainToyota 8 месяцев назад

Shop These Rough Country 3.5" Suspension Lift Kit ! : terrain.jp/3SMQhiq

@stevegarcia3229 8 месяцев назад

Does the truck sit level front to rear ? Or is it nose heavy ? Because it looks like the rear lift is higher

@yangxai3317 8 месяцев назад

good job. brother. I'm bought some lift kits on your online store and this video help me understand follow the step by step n easy installed. Thank you

@mariodiaz3897 5 месяцев назад

Will front cv axel boots break with this lift are angles ok

@yojuanjose1 7 месяцев назад

Is there a 4” lift kit similar to this one?

@BlueSTI 2 месяца назад

Why not show the driver side UCA install thats the hardest side. I ended up taking a grinder to the bushing on the UCA bolt cause i couldnt get it to come out even after bending alot in the inner fender and engine bay. The install isnt easy as these videos so be prepared

@tribulation138 23 дня назад

Yup. I bought two extra long bolts. Cut the heads off, put them in the other direction.

@alexanderjohnson83 2 месяца назад

Is the front and back both lifted 3.5" with this ?

@Mikenike88 2 месяца назад

How much does it lift the back?

@scottfergusson8411 Месяц назад

Any reports on vibrations while driving ??

@cesarcastro5159 23 дня назад

It works for 2wd?

@user-wn1ij1jb4i 4 месяца назад

I bought the 3.5in lift kit from rough country for my Tacoma, it’s the $800 one. It didn’t come with the differential washers. Do I still need to make a cut on the bracket for the differential? Or is it fine to leave like that?

@jimdotdev 3 месяца назад

I am looking at these kits, but I would say no. If you don't have the spacer, don't cut the diff bracket. I seen one without the spacer, but I worried that is it not over extending your cv's?

@bwood9197 7 месяцев назад

will this rub at all if you remove that front plastic part under the front end

@bg90209 6 месяцев назад

No, definitely remove that part. It’s easy and it makes the truck look WAY higher in the front. They just put it there to increase gas mileage on paper.

@bwood9197 6 месяцев назад

video says there is rubbing with this set up i’m asking if i remove that price will there be any rubbing at all now ?

@jkgrainhandlersltd.necowal3287 3 месяца назад

Says rubbing on 35’s. No rubbing on 33’s

@selineramos4857 Месяц назад

On this 3.5 lift what size of wheel and Tire can I run? I have the cab mount chopped and have already did some trimming , some plastic and hammering on the pinch welds ect, what will be the widest tire can I get away with, would like 12.50, tire of the pizza cutters tires. I'm running 285s 70 16 Gladiator MT tires, on stock wheels. Thank you for any info you can give me.

@arturoaguilar2685 6 месяцев назад

Does it work with RWD Tacomas?

@kevinromero3990 6 месяцев назад

Yes but you don’t need a diff drop washers since you don’t have a front differential.

@timothycruz5375 4 месяца назад

Did you mean 2WD? (Prerunner)

@tonynguyen6241 7 месяцев назад

Any rubbing on that? thanks

@kevinromero3990 7 месяцев назад

I did this 3.5 lift on mine. I have the 265/75/16 a lot of room for 33s I don’t think it will rub with 33s but that’s the biggest you can go I think. Just be aware, the vibration issue did come up on mine.

@Matt-Ellis 6 месяцев назад

I’ve got this on my 2017 TRD Off-road with SCS F5 rims. They have a -38mm offset and rubbed a little bit, this is with a 33 inch tire. So my guess is it only rubs because of the offset.

@bg90209 6 месяцев назад

@@kevinromero3990what’s the vibration issue? I havent watched the whole video haha

@kevinromero3990 6 месяцев назад

@@bg90209 I think it’s because of the lift, the angles of the driveshaft, and front differential changes. So therefore the angles of the CVaxles change. You have to replace the clamshell bushing. The vibration I got was from 30 mph until stop. If you wonder how it feels, it’s feels exactly like when you go over the limit line in the highway. “Rumble strips” I believe they’re called. That’s exactly how it feels. Only the driver side is the issue though. You can read about it on google “Tacoma world”

@kevinromero3990 6 месяцев назад

@@bg90209front driver side clamshell bushing fails. (Don’t actually brakes, it is not designed for the axle to have more angle Than the factory lift) so it provokes vibration. 7:38