Тёмный

2005 F250 6 0L No Start No High Pressure Oil Pressure 

Fixing Cars With 15th St Automotive
Подписаться 8 тыс.
Просмотров 52 тыс.
50% 1

Авто/Мото

Опубликовано:

 

26 фев 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@cristianmendio2461
@cristianmendio2461 Год назад
I know this is an old video, but just want to say thank you for being an honest diesel mechanic.
@BRORANDYMARTIN
@BRORANDYMARTIN 2 года назад
Your video on the steering box was excellent. Straight forward, to the point. It saved the day for me. If I lived close to you I would use your shop. Thanks.
@richiemiller5691
@richiemiller5691 2 года назад
Great video and diagnosis regimen. I have the exact same symptoms in my 2005 6.0 Super Duty - No leaks...and no pressure. The last thing I suspected was the pump...but this is what my scan gauge readings are pointing to. Same as yours. Thanks for posting this. Lots of new stuff I hadn't seen before.
@gorgeousdzastr
@gorgeousdzastr 6 месяцев назад
I'm glad you were an honest tech. You're a hard find. With there were more like you in this world. Great video. I'm looking for reasons of having no base oil pressure at all. Cheers!
@victor09alex
@victor09alex 2 года назад
Great video
@bigmotor3845
@bigmotor3845 Год назад
Great Vid!!!
@prospexican
@prospexican 10 месяцев назад
i would love to see the scan tool reading at icp while under air pressure
@ZoneOne2150
@ZoneOne2150 3 года назад
How many cranks did it take to purge the air out of the system and get it to start?
@lukefielder7208
@lukefielder7208 2 года назад
Couldn't the screen damage occurred when you put the air fitting and pressure to the system with it still being stuck in there?
@angelhuerta8670
@angelhuerta8670 Год назад
When we do the ipr leak test do we have to open up anything or we can check it with everything closed?
@alwayslearning4418
@alwayslearning4418 3 года назад
What scan tool is that
@alexgonz5550
@alexgonz5550 2 года назад
🍺🍺🍺🍺🍺🍺🍺👍👍👍
@tnybo13
@tnybo13 3 года назад
Noticed screen was gone right away. With screen still in pump can't get a good seal. That's why you don't buy those 5.00 kits
@jett-rampartflyer2852
@jett-rampartflyer2852 2 года назад
I have shop air hooked up into the ICP port on the passenger side. I hear no leaks. This on a 2005 6.0 Am I getting air to the whole system or do I need to feed shop air through the IPR only? I dont wanna replace the HPOP if that isn't the issue. I can only build to 15psi at the ICP sensor while cranking.
@fuckjewtube69
@fuckjewtube69 Год назад
You need to block off the IPR valve when you do that or it just bypasses it back into the crank case so yeah you did it wrong. Make sure you have the right oil filter there is a different one that can cause that also. Btw did you end up fixing it?
@jett-rampartflyer2852
@jett-rampartflyer2852 Год назад
@@fuckjewtube69 I did not, unfortunately. I had no business working on that 6.0, but the customer insisted on me putting a new HPOP in it, I advised against it as I told him it would probably not fix the no-start issue. He said to do it anyway, because he had 'Googled it' so I did. That didn't fix it either. Still wouldn't start. He paid me for switching out the HPOP, then it was towed back to a local shop in his area. He was 7-800 miles from home and on vacation when it happened.
@regigilman2255
@regigilman2255 8 месяцев назад
Y not use a correct socket size create the cut out
@spelunkerd
@spelunkerd 3 года назад
Interesting crank no start, you must have quickly recognized this from past experience. I was still thinking of spark and fuel, and you had already skipped well ahead. Noteworthy point at the end, I guess air in the system prevents it from building pressure so air needs to bleed off. Is there a special procedure to bleed air?
@matthewwilliams4982
@matthewwilliams4982 3 года назад
To bad diesels don’t run off spark
@spelunkerd
@spelunkerd 3 года назад
@@matthewwilliams4982 Ha, ha, good point.
@MrMartyCo
@MrMartyCo 9 месяцев назад
​@@matthewwilliams4982*too
@JacksonGuitarsPlayer03
@JacksonGuitarsPlayer03 Год назад
I always found it kinda weird that the turbo on the 6.0 is on top just looks funny in my opinion. They are awesome sounding turbos and engines. They sound like a fricken jet straight piped! But they are the most unreliable pickup diesels I heard because people supe them up and the thing can’t handle it. Blows gaskets, radiators, turbos, the engine blows. Etc etc . Bulletproofing them I hear is the way to go if you want horsepower.
Далее
КРАСИМ ДЕНЬГИ В РОЗОВЫЙ!
01:01
Просмотров 337 тыс.
ФОКУС С БАНАНОМ🍌
00:32
Просмотров 114 тыс.
Early 6.0 HPOP....Fixing another shops FAIL
16:49
Просмотров 12 тыс.
6.0 PowerStroke No Start Diagnoses (Bad HPOP)
12:57
Просмотров 30 тыс.
Alliant Power 6.0 L No Start Diagnostic Guide
11:34
Просмотров 400 тыс.
7.3L Cold No Start - The death of the 7.3
22:27
Просмотров 255 тыс.
Whats going on with my 6.0 Ford Powerstroke
36:36
Просмотров 634 тыс.
6.0 Ford Diesel | Air Leak Test - HOW TO
14:42
Просмотров 57 тыс.
Never seen this before. Chevy oil pressure problem
4:21
#automobile #дальнобойщики #авария
0:31
tractor rear light project #project
0:40
Просмотров 14 млн
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19