2006-2011 Hyundai Accent Idle Air Control Valve Replacement

Подписаться 103 тыс.

Просмотров 37 тыс.

50% 1

Learn How to replace the idle air control valve also referred to as IAC on a 2006-2011 Hyundai Accent. Code P1508 may also result from this part going bad.
Typically what will happen is that you will experience an erratic surging idle or the rpms may increase resulting in a high idle.
Tools For The Job
🔧BUY THIS PART: amzn.to/3QSlNra
🔧BUY Anti- Seize: amzn.to/3QU1gCS
🔧Buy 10MM Socket and Ratchet: amzn.to/3Cd8kWQ
Subscribe to our channel: www.youtube.co...
Email Business Inquiries to: Homeownerrepair@gmail.com
#autorepairvideos #diyautorepair #diyautorepair
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@brianbayer9746 8 месяцев назад

Took me fifteen minutes to clean mine, removed it & disassembled it & cleaned it properly, also got to see what makes it work, no cost but a little bit of brake clean & and gained an understanding of how it comes apart.

@HomeOwnerRepair 8 месяцев назад

Thank you for watching our auto repair video that shows you how to replace the air idle control valve on a Hyundai Accent.

@ultragtman1563 4 месяца назад

I'm having hard idle coming to a stop at a red light. The engine will rumble then die. When putting it in reverse the car 100% of the time shakes violently and dies. When I come to a stop i have to quickly put it in neatural for it not to shake and kill the engine. I'll raise the rpms in neatral and buck myself in Drive in order to get the car to move forward. Mid speed and accelerating the car feels normal. Startign up the car warms up like normal too. I think the last thign i need to do is try replacing this idle air control and it should fix it. Thumbs up from me so far.

@RezyMuzik Месяц назад

My lord my car is doing the same thing and I’ve changed it all nothing has helped

@HomeOwnerRepair 16 дней назад

Is the check engine light on?

@HomeOwnerRepair 16 дней назад

Is the check engine light on?

@RezyMuzik 16 дней назад

@@HomeOwnerRepair my check engine light doesnt work 🙄 but u can read the obd and get the codes off it

@ultragtman1563 16 дней назад

@@HomeOwnerRepair Nope no check engine light on. I have reduced the problem to my transmission oil levels being dry as a dessert and i would need a drain and fill. Ive read that for older cars you dont want to flush and fill because the gunk creates enough friction? Therefore flushing it clean completely would cause slipping? Its a hyundai Elantra 2008 at 190,000 miles. I never got the transmission oil replaced. When i turn the car on to move it i can smell the engine roasting it lets out a bit of smoke and steam. So I figured i can have JiffyLube drain and fill and replace my Transmision oil filter as well! Ill update when i get around doing that lol

@HomeOwnerRepair 6 месяцев назад

Have a question? Subscribe to the channel, leave your comment let us know you subscribed and I will reply back to you.

@shawnflanagan205 6 месяцев назад

I have a 2009 Hyundai Elantra GL. I changed out the ICV and still have high idle. Once I drive for awhile, the RPM comes down. My small car is horrible on fuel. No engine light or codes on the Diagnostic Test.

@HomeOwnerRepair 6 месяцев назад

It may also be the camshaft position sensor. Both of these went on my Hyundai and when I replaced both the car was all set. The cam shaft sensor was giving me an erratic RPM on the highway.

@shawnflanagan205 6 месяцев назад

I seem to be getting worse gas mileage since I switched. It's costing me 14 litres per 100 km and it's mainly city. The air filter is changed, changed the plus and wires last summer, changed thermostat, oil is new. There are no codes. No lights on. I have tried fuel injector cleaner and still no changes. Tires are good, aliment just done. Maybe a dud. I have it like this for 2 yrs.

@RezyMuzik Месяц назад

Mine wont start unless i hit the gas and it will not idle unless the gas pedal is being pressed. I smell alot of exhaust and stuff outside the car im at a loss because i changed all kinds of stuff and nothing has helped

@AndrePretorius-oo6hc 5 месяцев назад

thank you

@HomeOwnerRepair 5 месяцев назад

You're welcome

@HomeOwnerRepair 5 месяцев назад

You're welcome

@Mohammed84. Год назад

Hello, I have a 2007 Kia Spectra car, and I have a problem with instability rpm I changed the valve more than once, and the same problem sometimes goes up and sometimes goes down. I checked everything and cleared the fault code, and the same thing. Please help.

@HomeOwnerRepair Год назад

That same thig happened to this car, ended up being a bad camshaft sensor

@Intorqueo629 Год назад

How's the valve been holding up? My 2010 has been having issues with stalling when idling so I was looking at this direction to try and diagnose the problem

@HomeOwnerRepair Год назад

It has been fine

@ricardoalvarenga4383 6 месяцев назад

Good morning, a question when the idle speed does not work by starting the engine for the first time from one day to the next and during midday, could the cause be due to the ambient temperature and low sun? or is it the cause of some problem?

@HomeOwnerRepair 6 месяцев назад

It may be acting up as it heats up and cools down. I replaced mine and it wasn't that expensive.

@Faisal_al_shammari 28 дней назад

Hello how to relearn the idle after throttle cleaning

@HomeOwnerRepair 16 дней назад

I didn't need to do a relearn procedure when I replaced my air idle control sensor.

@famo6225 2 года назад

Can the iac valve cause car to lose power when running ac?

@HomeOwnerRepair 2 года назад

You may loose a little power in general when the IAC is bad. When the AC is turned on it might rob even more power.

@famo6225 2 года назад

@@HomeOwnerRepair well my car def loses power when I turn the ac on and drive..so I try not to run my ac as much as possible

@79jasm Год назад

I’m having the same problem with running my ac

@MrMazaah 11 месяцев назад

I use Kia Rio 08 I don’t knw if d gasket Is suppose filter d air coming to the valve from the injector

@HomeOwnerRepair 8 месяцев назад

We currently do not have an auto repair video on this particular repair. Have a great day!

@derekkeogh7196 5 месяцев назад

Hi I have a Hyundai IMAX. I need to replace the actuator assy idle speed . We're is the best place to buy one ?

@HomeOwnerRepair 5 месяцев назад

You may want to check Amazon...hope this helps you out.

@Toby32022 2 года назад

Me too i changed that part and my accent 2008 run OK but my idle is a bit low ,so, is it my idle adjustable by a kind of screw that made to give a little more idle ? If yes ,do you know where that screw is situate ? Thank's in advance if you have an answer . Cheers .

@HomeOwnerRepair Год назад

Not to my knowledge. Mine idles around 500-800 rpms...Tiny motor

@cedrickphanlafreniere9321 Год назад

Hi, I changed for a new ICV. When I plug the new one in, my car idles at high rpm like if I had it unpluged. Why is that? I bought the right part. I would like to know you guys opinion on it. It is a hyundai accent 2009.

@HomeOwnerRepair Год назад

Wondering if the part is bad. Is it throwing a code you can pull?

@bestrong1240 6 месяцев назад

so much cheaper on Amazon compared to a parts store I'm waiting for mine to come in the mail

@HomeOwnerRepair 6 месяцев назад

I buy as much as I can off there. Hope this video helped you out.

@Ahmad_Sya Год назад

U scanned and error appear for this case?

@HomeOwnerRepair Год назад

Yes, I was getting a Code P1508

@neiljustinealmenor8854 6 месяцев назад

I change mine but my rpm still bouncing a little bit when the engine is heated up

@HomeOwnerRepair 6 месяцев назад

If you still have a check engine light pull the code and see if it is a new code and what is is pointing too.

@jimkin6211 Год назад

Were is the iac valve located on a 2013 kia soul 1.6

@HomeOwnerRepair Год назад

I currently do not have a video on this particular repair. I'll keep this in mind in the event that we have to do one of these in the future.

@samtradder7590 Год назад

I have the same problem on my 2011 Accent. Did you buy a new IAC from the dealer or from any auto parts store. I live in Canada and only one auto parts store has it and it costs $320 Canadian. Was it that expensive there? Thanks.

@HomeOwnerRepair Год назад

I bought it on Amazon. Here is a link to it. amzn.to/3QSlNra

@samtradder7590 Год назад

@@HomeOwnerRepair Thank you very much for the prompt response and help, I appreciate very much. I shall get it from here as well.

@jeremyb456 9 месяцев назад

Just go to a junk yard to get a used one I got to Pick and pull they are in canada I am in calgary and can get the part for less then 10.00

@larrys9difabio411 Год назад

My Accent shakes at idle. Is it idling too low(750 rpms)

@HomeOwnerRepair 8 месяцев назад

You may want to see if a motor mount is broke.

@RezyMuzik Месяц назад

Nah mines is shaking violently as if it wants to run out of gas

@kerajo6728 2 года назад

What if you change it and it still come on after you change it and you still have the same code po508

@HomeOwnerRepair 2 года назад

Did you try clearing the code?

@davidmccann3651 Год назад

I have the same car, 2010 Hyundai accent and I’ve changed battery, position senor, ignition coils, plugs , and fuel pump and filter and it still tries to start but won’t ! Any help would be greatly appreciated!!!!!!!!! Help in Mississippi

@HomeOwnerRepair Год назад

Is the check engine light coming on?

@davidmccann3651 Год назад

@@HomeOwnerRepair I fixed it! It was crankshaft sensor!

@زيادالحربي-ب1ت Год назад

Is it in 2013 model ؟

@HomeOwnerRepair Год назад

We currently do not have an auto repair video for that particular model year.

@andrewokechimbama Год назад

Will it make my car to crank not to start

@HomeOwnerRepair Год назад

Usually not unless it gets really really bad for some reason. If the check engine light is on you may want to have the code pulled to see what it is pointing to.