2007-2013 Toyota Corolla How to Clean the Throttle Body and the Idle Air Control Valve PART I 

Thank you very much my good friend for your poetic words

Thanks my friend and always be well

Thank you my friend

I'm very happy about that. I do not think you danced? So let's go for a dance

@@YiannisPagonis reminded me of Dreams by fleetwood mac

OEM Part Number for Body Assy, Throttle 22210-0D090 4ZZ-FE Toyota Auris 2007/03-2012/09 _E15_ 1.4 1398 ccm, 71 KW, 97 PS 4ZZ-FE Toyota Corolla 2000/02-2001/11 _E11_ 1.4 16V 1398 ccm, 71 KW, 97 PS 3ZZ-FE | Baujahr ab: 05/2000 Toyota Corolla 1999/10-2001/10 _E11_ 1.6 16V 1598 ccm, 81 KW, 110 PS 4ZZ-FE | Baujahr bis: 01/2002 Toyota Corolla 2001/11-2007/02 _E12_ 1.4 VVT-i 1398 ccm, 71 KW, 97 PS 4ZZ-FE Toyota Corolla Compact 1999/10-2002/01 _E11_ 1.4 1398 ccm, 71 KW, 97 PS 4ZZ-FE Toyota Corolla Liftback 1999/10-2002/01 _E11_ 1.4 1398 ccm, 71 KW, 97 PS 3ZZ-FE | Baujahr ab: 05/2000 Toyota Corolla Liftback 2000/02-2002/01 _E11_ 1.6 1598 ccm, 81 KW, 110 PS 4ZZ-FE | Baujahr bis: 01/2002 Toyota Corolla Station Wagon 2002/01-2007/02 _E12J_, _E12T_ 1.4 VVT-i 1398 ccm, 71 KW, 97 PS 4ZZ-FE Toyota Corolla Station Wagon 2000/02-2001/10 __E11_ 1.4 16V 1398 ccm, 71 KW, 97 PS 3ZZ-FE | Baujahr ab: 05/2000 Toyota Corolla Station Wagon 2000/02-2001/10 __E11_ 1.6 16V 1598 ccm, 81 KW, 110 PS

Thanks my friend and always be well. Greetings from Greece.

@@YiannisPagonis I love Greece it's a beautiful country and great people. I have been to Greece many times also I can speak some Greek too. Beautiful language.

@@DidiLeeReco Brazil is also a wonderful country with very good, warm and simple people and is a very beloved country in the world. I would love to visit your country to enjoy up close all these beautiful things that exist in this magical country. Oh how I wish I could come to Brazil and spend my summer vacation!

nah it's not hard it's fun 🙃

1. Why does my idle drop when I turn my headlights on? Electrical loads like headlights (which are a big electrical load) cause a mechanical load on the engine. The harder your alternator works, the harder the engine has to work to spin it. Therefore when you turn the headlights on, your engine has to work harder and the idle drops as a result. 2. Why does my RPM drop when AC is on? The idle speed initially drops because the A/C Compressor is driven by a belt connecting it to the crankshaft and requires some of the engine's power to drive it. Your vehicle, however, have a mechanism to detect this rpm change under the A/C Compressor load and will bring the rpm back to normal. 3. How do you fix a rough idle when AC is on? Here is the procedure of fixing rough idle when AC is on: Open the car hood. Access the throttle body. Have a friend or colleague turn the key to the “On” position, but don't start the car engine. Request the helper to slowly press on the accelerator. Next is to spray the throttle body cleaner on a rag and or cloth.

@@YiannisPagonis throttle body has been cleaned thoroughly. What else could be the problem for rpm drop and vibration with load? Where is electric load sense wire (ELS)? What is your opinion?

@@eatentravel www.toyotaguru.us/engine-control-systems/electrical-load-sensor-els.html www.google.com/search?q=where+is+electric+load+sense+wire+%28els%29+on+toyota+corolla%3F&sxsrf=ALeKk03WmBXT6krVxNAdEpAfNfieb76MGA%3A1620852343133&ei=dz6cYKq5B7D87_UPkai88A8&oq=where+is+electric+load+sense+wire+%28els%29+on+toyota+corolla%3F&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABMgUIIRCgATIFCCEQoAEyBQghEKABOgcIIxCwAxAnOgcIABBHELADOgQIIRAKUJi7zwFYqq3RAWDG7tgBaARwAngAgAHjAogBtxKSAQgwLjExLjIuMZgBAKABAqABAaoBB2d3cy13aXrIAQjAAQE&sclient=gws-wiz&ved=0ahUKEwjq0JTBgcXwAhUw_rsIHREUD_4Q4dUDCA4&uact=5

Its not the tottle body problome its battry wireng and genertore broblom

Its not the tottle body problome its battry wireng and genertore broblom

Thank you very much my friend and be well always ❤❤

It is not necessary to disconnect the positive terminal of the battery if it has a cover. If the positive terminal does not have a cover then it is necessary to disconnect in order not to short-circuit. The positive terminal as we know it is a conductor of current while the negative is ground.

Yes because there are 2 different models that each have their own differences

Here are the top 5 reasons why your car might be shaking and stuttering when you are stopped… 1. Broken Motor Mounts Your motor mounts are what keep your engine attached to your car. If you motor mounts are broken or have become disconnected from your engine this can be the cause of your car’s shaking. If the shaking decreases when you put your car into neutral this could indicate that it is the motor mounts. 2. Misadjusted or Worn Out Belts Misadjusted or worn out timing belt and other belts just as the serpentine belt can cause engine vibrations. If these belts have become loose or worn out then they can also cause other parts of your engine such as fans to not operate properly - resulting in strange noises and shaking. 3. Faulty Fuel Intake A fuel intake system that is dirty, or faulty can affect the smoothness of your engine’s operation. After driving for many times your car’s fuel intake system can get clogged up when they become too clogged they will begin to deliver uneven amounts of fuel to your engine. If your engine does not get a continuous even supply of gas then it will start to shake. 4. Spark Plugs Worn out spark plugs are one of the most common causes of engine shaking. If your spark plugs are dirty or worn out they will be unable to fire properly and create the spark your engine needs to ignite the fuel. This causes your engine to misfire. 5. Loose or Disconnected Hoses Loose hoses can be the culprits for many performance and vibration issues. Every car has vacuum hoses, these connect to different parts of your engine and help to clear the by-products of gas - aka exhaust fumes. A hose that is leaking or broken can cause huge amounts of shaking in your engine. If your hoses are disconnected or worn out many other engine problems can begin to occur as a result. Problems include: your engine misfiring, losing power, stalling and shutting down entirely.

It could be caused by a dirty throttle body, a bad cooling fan, or a dirty/damaged IAC valve

P0102 TOYOTA Possible Causes What does this mean? 1. Faulty mass air flow sensor 2. Intake air leaks 3. Dirty mass air flow sensor 4. Dirty mass air filter 5. Mass air flow sensor harness is open or shorted 6. Mass air flow sensor circuit poor electrical connection

My friend this video is purely for educational purposes. It is better to do this work as a precaution to avoid unpleasant situations. P0102 TOYOTA Possible Causes What does this mean? Faulty mass air flow sensor Intake air leaks Dirty mass air flow sensor Dirty mass air filter Mass air flow sensor harness is open or shorted Mass air flow sensor circuit poor electrical connection How is the P0102 TOYOTA code repair? Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

How to fix rough idle when warm? Most likely, the causes of rough engine idle crops from the basic functional components like direct fuel injectors, PCV valve, EGR valve, Oxygen sensors, vacuum leaks, air filter, and spark plugs or wire. I did not understand your second question. Repeat it in simple and understandable words because I do not make sense. ΟΚ?

@@YiannisPagonis thanks for your reply, second part I mean is that sometime when I move it instals the car when in 1st gear to move.

You are welcome my friend

My friend, among the potential underlying causes are vacuum leaks, EGR system malfunctions, malfunctioning oxygen sensors, dirty fuel injectors, fuel pump malfunction, faulty spark plugs, a faulty mass airflow sensor, or a faulty throttle position sensor.

Hello buddy. Even though your car is old, if you keep it in good condition, you can keep it for several more years. Unless you're going to have an old car. Is your Corolla in good condition? Does this have problems?

Thank you my friend

You are welcome my friend 😊😊😊🌹🌹

My dear friend, the idle rpm of the engine is adjusted by the throttle cable. Watch the following related video to learn more: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnJW2bkUTwY.html

@@YiannisPagonis my yaris has no cable...

@@CRM537 Yes because yours is automatic

You are welcome my friend

When the throttle body gets dirty, it has a direct effect on how smoothly the engine operates. Signs indicating a problem include rough idling, jumpy or sluggish acceleration, poor fuel economy, and stalling. With the use of a throttle body cleaning product, the dirt and debris buildup are easily removed.

Low or high fuel pressure from a dirty fuel filter, defective fuel pump, clogged fuel tank strainer, bad fuel regulator or dirty/clogged fuel injectors can cause rough idling. Try replacing the fuel filter and add fuel injector cleaning treatment to your fuel tank to clean and hopefully unclog your injectors.

@@YiannisPagonis thanks a lot

@@Babyjokers2.0t You are welcome

An idle-stop system (also commonly known as the start-stop system) helps drivers save gas by powering down the engine (idling) when the vehicle comes to a halt for even a short period of time. Imagine you brake at a red light-the hybrid engine automatically shuts down to save on gas.

1. Why does my RPM go up and down at idle? Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate. ... When this happens, the job of the idle air control valve is to bring this deceleration down to a slow and smooth idle rather than suddenly cutting off the fuel supply causing the motor to die 2. Why does my engine idle high when cold? When a cold engine is started, a component called the auxiliary fuel injector sprays additional fuel into the intake manifold. The extra fuel helps the engine start faster. ... So, the throttle valve opens to raise the engine's idle speed. That's why you see the engine idling at 1500rpm or even higher.

@@YiannisPagonis If I give it a good clean my car be more fuel efficient and idle better? Or would it be lamba sensors

@@rossoneill1654 My friend, you must first clean both the throttle body and then the Idle Air Control Valve and you will see a big difference in the performance and operation of your car

@@YiannisPagonis thank you very much for this information look forward to cleaning it and hopefully see a big difference as the fuel economy is quiet bad thanks again

Common culprits include the ignition control module, plug wires, coils, and spark plugs. Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer.

It’s most likely what he fixed. Mines have the same exact issue and I cleaned the MAF sensor and still same symptoms as yours buddy. I also cleaned the throttle body but forgot to clean this dumb valve. Car stalled on me twice already when coming to a low idle or stop. Ima clean it when I have a chance but now im going to have to replace the throttle body gasket again :/

You are welcome my friend

In this case, you will just have to change your brake pads. In reality, brake pads are consumables equipped with a lining, when this lining is used, you will brake with the structure of the pad that will generate this noise, these vibrations, and you should also feel a loss of braking power. You can make this change by yourself with some basic mechanics and some equipment. It will only cost you a few tens of euros for the two pairs of brake pads.

It's ok, no problem

@@YiannisPagonis yeah I just saw one comment. I appreciate the time and effort you took to upload. I don’t see the critics uploading a video, if they’re so “knowledgeable”. Keep up the good work !

@@drakkar_night3346 Thanks a lot my friend. I fight for the best

You do the need to disconnect the battery, as long as you do not cycle the key

Thank you 🙏

Does electronic throttle body have idle air control valve? In addition to a throttle plate, the throttle body contains an idle air control (IAC) valve, which allows air to bypass the throttle plate and control the vehicle's idle speed. When open, the IAC allows more air to enter the engine, which raises the idle.

What is a fly by wire throttle body? Throttle by wire Accelerate-by-wire or throttle-by-wire, more commonly known as electronic throttle control, is a system that actuates vehicle propulsion without any mechanical connections, such as cables, from the accelerator pedal to the throttle valve of the engine or other propulsion systems. What is the difference between fly by wire and cable throttle? The main difference between a drive-by-wire and a drive-by-cable system is that there is almost no mechanical linkage between the engine and the accelerator in a drive-by-cable system. On the other hand, a drive-by-wire system includes an electronic signal that tells the engine how much power it should generate.

You just explained it. 'Fly by wire' is is electronic way of controlling throttle body by stepping motor controlled by computer, which opens and closes the throttle plate, as opposed to mechanical cable connected to gas pedal. This system doesn't use idle control valve since the stepping motor opens the throttle by needed percentage. Pretty much all cars after 2010 use Electronic Throttle Body. On North American Corolla 1.8L the conventional throttle body was used until 2006, later models use 'fly by wire' stepping motor throttle body. But when you clean the throttle plate, the computer has to learn new feedback points for the idle or the idle speed will be very high. On Corolla it usually takes two/three drive cycles to re-learn proper idle RPMs. Some suggest with key in ON position to press the acceleration pedal slowly to the floor and slowly release it, but I didn't find it necessary. The only negative thing about this system is that Electronic Throttle Body costs way, way more money. Also sometimes the acceleration pedal dies. The one I changed last time in some X1 or X3 BMW was some $150 for gas pedal 🤨

My friend most likely the problem you are facing is low compression in the 3rd cylinder. You have worn cylinder springs and they need replacing. The following video will help you understand it better ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ICgRTtBFW08.html

@@YiannisPagonis thanks for reply I sold car as it was, got an offer I couldn’t refuse 👍🏻

@@pc6334 Well done my friend and very well done to sell this troubled car. I hope you use the money you got properly and help someone of yours who really needs it.

pagonis33@gmail.com ή 6972343643

Thanks a lot my friend

If the ignition switch is off which means that no electricity is flowing then it is not necessary to disconnect the negative battery terminal.

@@YiannisPagonis yeah but ECM can sens if you switch off or on .....

@@naveedafzal4645 I agree, the negative terminal should be disconnected anytime one is working with electronics, car on or off.

@@Mike_44 thanks bro

Thank❤ you my👭👬👫 friend😊😇

Yes the best way is to remove it completely and clean it from both sides

@@YiannisPagonis Will definitely do that next time thanks!

@@jamesshannon737 Ok but don't forget it!

Toyota corolla 2008

@@stevenbugas7552 The idle speed initially drops because the A/C Compressor is driven by a belt connecting it to the crankshaft and requires some of the engine's power to drive it. Your vehicle, however, have a mechanism to detect this rpm change under the A/C Compressor load and will bring the rpm back to normal. The Problem can be with the engine not getting enough ventilation. Problem: In your car the ECU is programmed to raise the rpm when it detects a stall or the RPM dropping down so if there is problem with your air filter which is not allowing much air into the engine and causing a stall but not noticeable your ECU will fight it to keep it in working range.This causes the RPM to bounce. Solution : Clean up your air filter and check for any clogs. Or could be your mass airflow sensor: If you think it is your Mass Air Flow Sensor, get your MAS cleaned first (and correctly). Avoid using after market air filters which have oily residue in them which can get onto the sensor. Your car software tries to maintain the idle rpm: The AC temperature governor tries to maintain temperature, but some clogs in coolant path or issues with compressor leads to variable load on engine. Make sure AC system serviced once.

You are welcome my👭👬👫 friend😊💜

Because my friend my car (2008 model, 1.4 cc, petrol of course) wears the 4ZZ-FE engine. In other words, we do not have the same engine.

I think that's the IAC.

Thank's my friend

What is the function of VVT-i sensor? The function of the VVT is to control the open and shut timing of the valves so as to maximize fuel economy. Any malfunction here can cause wastage of fuel or dip in performance. If you notice decreased fuel economy, chances are that the variable valve timing sensor or some other part of the VVT system is failing

Motor aşırı ısınıyor olabilir ve soğutma sisteminin onarılması gerekebilir. ... Bilgisayarlı motor kontrol sistemi arızalıysa, yüksek rölanti bir belirti olabilir. Hortumlardan herhangi birinde bir vakum sızıntısı suçlu olabilir; hepsini sızıntı açısından kontrol edin. Kötü bir rölanti kontrol ünitesi soruna neden olabilir, değiştirilmesi gerekebilir. Arızalı Gaz Kelebeği: Arızalı bir gaz kelebeği sistemi, hem yüksek veya düşük rölantiye hem de motorun durmasına neden olabilir. Kirli bir hava girişi veya çatlamış hava giriş borusu genellikle suçludur. Bilgisayar Arızası: Güç aktarma sistemi kontrol modülü arızalıysa, rölanti hızı etkilenebilir.

Is your throttle cable or electric?

It's basically a valve cover exhaust gas recirculator that takes gross air and pressure from valve cover and sucks it back into the intake system just below the throttle body, so it gets burned into emissions. You do not want a hole in 'any' hose or line in the vehicle.

The title of the background music is ''End of Summer'' and comes from the RU-vid audio library. The artist's name is ''The 126ers''. Thank you my friend.

To have more space to work better my friend

For working space to be enough

When the throttle body gets dirty, it has a direct effect on how smoothly the engine operates. Signs indicating a problem include rough idling, jumpy or sluggish acceleration, poor fuel economy, and stalling. With the use of a throttle body cleaning product, the dirt and debris buildup are easily removed

Infinity vidz help the helpless tried to release your negative accu / reset. else make sure your air intake precisely / avoid leak

Anton Riky dont White understand this. Is it meant so some can’t understand? Can you use complete sentences for those who are not well versed?

awos just allow computer to relearn the correct idle and you should be fine.

Google throttle body relearn for your make and model of car. You should find something on it.

Cool

Altis 2001 sir

If I had such a car at my disposal, my friend, then I would gladly do it

Καλησπέρα Γιώργο και καλή χρονιά. Η ερώτηση σου δεν είναι καθόλου άσχετη με αυτό το βίντεο. Καθάρισε το σώμα γκαζιού και την βαλβίδα ελέγχου αέρα ρελαντί και τότε θα δεις την διαφορά!!!

@@YiannisPagonis Σ ευχαριστω πολυ!καλη χρόνια να εχεις !

Παρακαλώ φίλε μου

What parts are you talking about?

@@YiannisPagonis brake and parts cleaner. Asking if that can clean the throttle

@@rayonwilliamssportsandfun2106 Yes you can clean them

@@YiannisPagonis with the spay that's called. ( break and parts cleaner) ? Or u have to use a special kind

Rayon Williams sports tv I would recomend crc throthle body and air intake cleaner

What is your car? Technical characteristics (model, year of manufacture, etc.)

Parakalo file moy🙏😊

No my friend you do not need to disconnect any battery terminals!

@@YiannisPagonis Unsafe, plus you have laces hanging off your neck. Suppose a prankster turns the key?

@@francishodge8028 best not to have that kind of people whenever you are working on anything.

About what?

Φίλε μου μπορείς να αφαιρέσεις αυτά τα πριτσίνια απλά με ένα καλό τρυπάνι και μετά με την βοήθεια ενός πριτσιναδόρου να τοποθετήσεις νέα πριτσίνια. Μπορείς επίσης να τοποθετήσεις βίδες με παξιμάδια και ροδέλες, αντί για πριτσίνια. Ευχαριστώ.

@@YiannisPagonis Ευχαριστώ πολύ. Η φλαντζα του IAC θέλει αλλαγή μετά το καθάρισμα, η βάζουμε την ίδια? Και ξέρεις τη βίδες η παξιμάδια να βάλω τη μέγεθος στο ΙAC? Ευχαριστώ πάρα πολύ.

@@music240 Φίλε μου καλό θα ήταν να αλλάξεις αυτήν την φλάντζα, ιδίως εάν είναι σε κακή κατάσταση (δηλαδή εάν έχει ξεραθεί), για να αποφύγεις τυχόν διαρροές. Τώρα για τις βίδες και τα παξιμάδια πρέπει να είναι 8 ή 10 χιλιοστών μεγέθους. Και κάτι άλλο εξίσου σημαντικό: μην ξεχάσεις να βάλεις λεπτές και μικρές ροδέλες τόσο στα παξιμάδια όσο και στις βίδες. Ευχαριστώ!!!!

@@YiannisPagonis Ευχαριστώ πάρα πολύ :)

Can I Use Green Coolant in Toyota? No, you should not use green coolant in Toyota. Green coolant is typically used in American cars and is not compatible with Toyota's engine coolant. The green coolant consists of chemicals such as boron and silicate which can damage Toyota's engine cooling system.

I’m working on my 09 right now and yes completely different.

@@treasurestatetarantulas406 If you needs help, just ask

@@angelisone I figured it out. Had to splice some wires back together, damn rabbits.

@@treasurestatetarantulas406 If you had to do this. Then soon your O2 sensor, spark plugs, inlet tubing, valve cover, inlet & outlet manifold gaskets need replacement

@@angelisone I do not believe I will. A rabbit chewed one tiny wire in my electrical connector. I spliced it and everything is fine.

Mejor hablar inglés. Usted puede;

@@YiannisPagonis THE BUTTERFLY IS NOT DESCALIBRATED AT THE TIME OF CLEANING IN THAT WAY?

The electronic throttle that your car has saves you from a lot of trouble and things become simpler because everything is done automatically by the car's computer. It makes the necessary adjustments according to the driver's driving preferences

Disconnect the idle air adjustment valve by locating and disengaging the electronic connector that holds it to the throttle body. Turn the idle screw to adjust the idle-turn the screw to the left to increase the RPM or to the right to lower it.

@@YiannisPagonis Thank you for the reply. First I dosconnect electric connection. then start the engine, I turned the screw clock wise, and observed the rpm, it start reducing from 1500 to1000, but upon further rotating clockwise again increasing the rpm, so I left the screw where the rpm was mininum 1000 rpm, then connect the electric connection and restart the engine, did the idle relearn procedure. now rpm is 800 on idle . is this Ok? or do I need sonething to bring rpm 650 to 700 at idle?

@@inamrehman8709 May I ask you something? When you adjusted the engine idle speed, did you let your engine warm up for a few minutes or did you adjusted it cold?

@@YiannisPagonis engine was warmed up already before starting the whole procedure. I do not know why while rotating clockwise at some point it again start increasing the rpm instead of decreasing them.

@@inamrehman8709 What happens if the idle air control valve is stuck open? If a car's idle air control valve is stuck open, it will create a rich air-fuel ratio while the vehicle idles. Therefore, the car's engine may start well while warm and run until it reaches a high enough RPM

What a pity my friend !!!!

Thanks 🙏❤

I do not understand what exactly you mean

😇🎅❄☃⛄⛄😊🎁🎊

It is 2008 model

@@YiannisPagonis I would thought 2006 - 2009 Corolla engine would be the same. 2009 has three 10mm bolts holding onto the Throttle Body. And there is no way you could open the flapper (7:48) with your finger. Its all electronic. Is yours a European model?

@@angelisone My car made in South Africa and is a 2008 model, 1.4 hp, gasoline, 97 horsepower. So it's a different generation than yours so there are significant differences.

@@YiannisPagonis Not a good ideal to post "2007-2013", when 2006 to 2009 are not even close being like yours. For a fact 2009 Toyota Corolla LE (USA model), the throttle should not be moved by hand /or by any object. There are no cable and all driven by electronic and gears.

corolla 2.0 diesel same like this?

Too bad and very sorry. But I think you can clean the throttle body without disconnecting the connector.

This video has helped many, as evidenced by the comments. I cleaned the throttle body on my 2013 Corolla using this video.

@@evanjohnrobasci7356 Thank you very much my friend for helping you. May God always have you well and be happy in your life.

@@evanjohnrobasci7356 Well done my friend and I'm really glad about that. Do it yourself

It is 2008 (10th generation Corolla)

Thank you kind sir

Ce que cela veut dire? S'il vous plaît parlez anglais afin que je puisse mieux vous comprendre

لا ليس 1.6 سم مكعب.محرك 1.4 سي سي ، 4ZZ-FE ، موديل 2008 ، 97 حصان ، صنع في جنوب إفريقيا.

السبب الكلاسيكي وراء تشغيل سيارتك للحظة ثم توقفها عن العمل هو نفاد البطارية. تحتاج السيارة إلى الكهرباء من البطارية لبدء التشغيل. ومع ذلك، إذا بدأت سيارتك في العمل ثم توقفت عن العمل على الفور، فقد يكون الخلل هو نقص الشحن أو تلف البطارية. عادة، إذا كان السبب هو خلل في مضخة الوقود، فقد تتوقف سيارتك مؤقتًا أثناء التوقف أو التباطؤ ثم يتم تشغيلها مرة أخرى. إذا لم تعمل المضخة بشكل صحيح، فقد لا تحافظ على الضغط المناسب. وهذا يعني أنه لا يوصل كمية كافية من الغاز إلى الأسطوانات، وهذه وصفة لمشاكل محرك السيارة

Конечно, это можно было сделать так 🤣

You might be right in what you say my friend

I wonder why he's not using the electronic throttle body

Sometimes they show us wrong videos

Did you watch the 2nd part of this video my friend? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0rld__gkP_E.html

@@YiannisPagonis Thanks I stand corrected nice work.

@@Captain_Scarlet_SIG Ok, no problem my friend

I'm sorry about that my friend

ممكن عربي كتابه

@@YiannisPagonis I happened to love it.

@@ChrissaSD That is very nice my dear 😂😎

What do you think I do?

My friend it is a method for everyone, much easier, simple and effective that anyone can do without some special tools.

You are wrong my friend. For better see the video and the next one that follows.

????????????

Why my friend? What's so bad about this music? It is not pleasant and does not set your mood; Or do you just not like listening to music at all?

This particular music or music in general?

@@YiannisPagonis actually, Both! Lol I skip all videos with music or if it’s the only one, it’s watch with no volume.

Mufaro nekutenda kuna Mwari