Limited sponsorship for Newest LED Bulbs Testing Provided. Don't hesitate to contact us to grab this opportunity. 1. Contact email: youtube@lasfit.com 2. Please tell us your vehicle make, model and year
Upgraded version LAplus series 9007 LED headlight bulbs work on 2001-2019 Nissan Frontier: www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007
Thank you for making the time to do this video, I was THIS close to sending back my lights because I couldn't figure out how to get it on with the locking ring. Thank you and subscribed.
Great clip. One question. Why do non of the frontier bulk replacement videos never show the replacement of the passenger side? That is the one that is the real PITA!
Hi, thank you for watching! Unfortunately, we haven't had the opportunity to film the replacement of the passenger side yet. Once we do, we will update it.
Great video guys, But I didn’t catch how you connect the led’s to the plug from the original truck wire. Does this new lights required adapters or something ? Thank you n keep up the good work .
@@bernardberben4852 There is a ring to lock LED bulb on the socket. 1. You need to remove the LED retainer clip 2. Put the OEM ring on the LED bulb 3. Put the LED retainer clip back 4. Install on the LED bulb and lock it in place with the ring.
From the video, the beam pattern seems really sharp - very comparable to stock. Do these bulbs give off much glare to oncoming drivers ? Interested in a set for my Frontier.
We'll do it when we get a chance. Or, you can refer to these two videos: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hdWaXX7IZ80.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--URl1GIoEnM.html
I have tried this brand and several other the plastic lock rings will never seat back in with the led bulbs. I’ve tried for hours on 3 different sets of bulbs. I removed the trim piece installed on the new bulb after the lock ring was on the diameter of the led heat sinks will just not let the bulb far enough inside the housing for the circle lock ring to attach....
Hi, about the installation tips for LED bulbs 9007 1. If the OEM plastic lock ring is not big enough to put into the LED bulb, please remove the white base collar(with a red ring) from the LED bulb. 2.Put the OEM plastic lock ring into LED bulb. 3.Put back the white base collar into LED bulb 4.Lock the LED bulb on headlight socket and fix with the OEM lock ring.
@@mattburns4407 Hi, is it convenient for you to take a short video for showing your issue? We'll help you fix the problem. Thank you Contact email: cs@lasfit.com
I can't figure out how to get hi and low beams un-reversed. I couldn't see in the video how to know what to do to get high and low in correctly because of poor video quality. Whatever you did got them reversed anyway. Can you help?
Hi, you can check this 9007 LED headlight bulb: www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007 For this LED bulb, the wider side (at one side of LED chips) upwards.
I have installed these on my 19 frontier and I have the plastic to the top and I still can get it right. The highs look no different then the lows. Also I’m not getting any range.
@@Fishingfilms Hi, could you check if the LED chips face side by side? The correct direction is the LED chips at 3-9 o'clock. Please contact us for support by email and attach some images to show your issue. Thank you.
Mine nissan has a plastic cover behind the bulb...the led air cooler seems to have contact with it..should I remove it or just cut some material off for it to be more spacious?great vid 👌
Hi, the plastic cover is used to lock the LED bulb on headlight. If it is too long to hold the LED bulb, you need to cut some material off for it to be more spacious.
Hi, how did they don'tmatch up the housing? Could you please take some pics to show us your issue? Plz contact us for support by email. cs@lasfit.com Here is a installation tip: 1.You need to take out the white plastic piece 2.Put the OEM locking o ring into LED bulb 3.Put the white plastic piece back
Yes, the headlight bulb size is 9007 for your Nissan Pathfinder 2011, which works as low beam and high beam, here is the link www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007
Would this fit on 2007 pathfinder? My reflector headlight have the square stainless inside place at front of the 9007 bulb i think it make the light bounce if you look on all reflector headlight they have this. So would this work on my headlight? Does the 2006 frontier have same oem headlight housing? Thanks I'm interested but which one...
Yes. These 9007 LED bulbs will fit your 2007 Pathfinder, the same as 2006 Pathfinder. You can purchase from this link: www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007
@@ryanbraun3500 The front turn signal light bulb size is 3157 for 2005 Nissan Frontier: www.lasfit.com/products/3157-led-turn-signal-light-anti-flicker-amber-amber?Social&YTB%20Channel&T-3157A
Yes, the same headlight bulb size. You can purchase from this link: www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007
@@jerrimearnhart2790 Haha, you're most welcome. Could you shoot a video and share with us when you're going to install them. We'll post your video on Lasfit channel and share with more customers. You'll get one pair of reverse lights for free. 🙂
Can someone help me with this... if you buy 2 9007 bulbs, that would eliminate buying 2 h11 and 2 9005 bulbs am i right? Because the 9007 does both high and low?
@@blacktailbowhunter0135 Ok. For your 2005 nissan pathfinder, the headlight bulb size is 9007, dual beam, which high beam and low beam share the same bulb. Here is 9007 LED bulb： www.lasfit.com/products/9007-hb5-led-headlight-high-and-low-beam?Social&YTB%20Channel&LAplus9007
It does not fit on your Pathfinder 2009. The correct headlight bulb is 9007, here is the link: www.lasfit.com/products/ls-plus-series-9007-led-headlight-bulbs
Hi, the white collar of LED bulb has one sticking point. Usually, when you lock the collar with LED bulb, it's at right direction. But if you find the beam pattern is not good, you can adjust the beam pattern by rotating the LED bulb.
