2007 - 2014 Chevy / GMC Amp and Sub Install | Tahoe, Suburban, Yukon

Подписаться 127 тыс.

Просмотров 127 тыс.

50% 1

Parts used linked in the description below!
Watch a full tutorial as a 2012 Chevy Tahoe will have a new Skar Audio Amplifier and Subwoofers installed to the factory radio. Note this system will be installed to the factory Bose amplified sound system.
This video applies to Chevrolet Tahoe, Suburban, and GMC Yukon and Yukon XL models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014. This video also includes amplifier wiring, amp installation and testing.
*For a 5 channel amplifier version install on this SUV, click here: • 2007 - 2014 GMC / Chev...
*For the the radio install on this SUV, click here: • 2007 - 2014 GMC / Chev...
*For the bench seat version radio install on this SUV, click here: • 2007 - 2014 GMC / Chev...
*For the front door speaker / tweeter install, click here: • 2007 - 2014 GMC / Chev...
*For the rear door speaker install, click here: • 2007 - 2014 GMC / Chev...
*For the back up camera video installed on this truck, click here: • 2007 - 2014 Chevy / GM...
*To see how to keep your factory DVD OEM flip down screens working, click here: • Keep your DVD screens ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Skar Audio 1500.1 Mono Amplifier: amzn.to/3pcCSQv
*Skar Audio 4 Gauge OFC Wiring Kit: amzn.to/31f0r2U
*Skar Audio Dual 12" Sub Enclosure: amzn.to/3xGDj8f
*Pac SNI-35 Line Out Converter: amzn.to/2UcAXjb
Disclosure: As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@ProvoBeastAudio 2 года назад

Parts linked in the description of the video!

@bears893 2 года назад

What if I wanted to run a complete different amp for door speakers. Being connected to stock amp can I still do so? Or will I have to bypass the factory?

@bears893 2 года назад

Thanks in advance!!

@BossLyfeTony Год назад

@provo beast Audio what type of terminal do I need for my ground wire to hook it on that stud 2007 tahoe

@AccessGranted95 Год назад

@@bears893bypass factory. I’m gonna run the RCA’s from back of headunit to the 4 channel, then speaker wire to each door speaker

@DanielDaniel1 Год назад

Really clean install my guy! This basically got me all set to get my sierra Denali bumping

@jordanhamilton5945 2 года назад

Great info and quality video/audio. Will definitely subscribe. Thanks for posting!

@mack606 Год назад

Beautiful damn work just beautiful a true professional

@MrSlm1981 2 года назад

I’ve wrecked my brain on how to run my power wire for over a year, currently it’s running down the passenger side and through the spot between the door and fender, squishing the wire and causing it to loose a lot of power. When the door is open you can definitely hear and feel a difference. I’m definitely about to go back out and run it this way. Thank you a million times over. I appreciate it!

@travisfehlman7433 Год назад

Fd`0

@mattt9909 Год назад

Ya bro that’s ridiculous. Always use a firewall

@MrSlm1981 Год назад

Update, amp blew not long after this post. Warranty the amp, it’s still sitting in the box waiting to be installed. I’m slowly buying all new wire, going from 0 Down to 4 or 6

@Luminous.Dynamics 6 месяцев назад

@@MrSlm1981 Unplug the power wire and remove it. You dont wanna burn your SUV down. Def route it like in this vid

@zealandwylie489 6 месяцев назад

Samee here dude

@neddyairsoft3972 Год назад

So I have the stock radio. I have the Bose logos in the A pillar tweeters. I when I went to install the converter in the plug in the center console. I noticed it doesn’t have anything to plug in down there. It’s missing the female side. No wires missing a plug or anything. Thoughts?

@calebward8055 2 года назад

How did you set the line out converter. Can you just turn it all the way up?

@andrewguthrie545 Год назад

Where did you buy the 2 brown wires the grounds at did you hook them up to something?

@ChappieSlappie216 8 месяцев назад

Instead of the PAC GM31 I used the NUITH kit basically the same. Issue I’m having is that the rear speakers don’t seem to be connected. Would I still need to tap into the Bose amp even though I used the wire harness for camera and steering wheel control?

@skylineauto4414 Год назад

Do you have to run a 1 ohm amp to utilize the pac module so you don't have to change the factory radio? I'd like to keep my factory radio if I can

@coverthigh 2 года назад

Okay where would be the second best place to put those if I’m using the back could I have one set behind the passenger seat?

@humberto91marquez Год назад

Will this process work on my sierra? I have the same dash. It’s a 2008 sierra slt

@KSmove Год назад

What socket or light did you use as a remote

@RaymondBurkes Месяц назад

Y'all did a great job name Raymond

@djmixerofficial1274 6 месяцев назад

You recommend to install a capacitor ?

@ericgibson15 Год назад

How to do you connect the fuse if using a extra battery

@kevinestrada4294 2 года назад

I have a question on my Tahoe I don’t know where to hook the battery cable on my aftermarket radio

@sammysmith08 2 года назад

What does it mean if your Yukon doesn't have any audio to anything that requires sound

@BlackLung911 2 года назад

Nice Fuse Holder. :)

@JP-Swag 4 месяца назад

In theory what would happen if one would connect both positives of the pac cables to one positive of the stock amp wires and both negative pac wires to one negative of the stock amp wires?

@brandonloiseau7248 Год назад

The guy before me had this thing (07 yukon) all wired up and has wires ran and I noticed on my bose amp there is just straight speaker wire spliced into the wires on connector…what does that mean?

@scapy101 2 года назад

I’m planning on setting my gains with the smd also but what did you give yourself for a reference point since this radio doesn’t show a volume number?

@ericfulmer2546 5 месяцев назад

My factory radio W/ Bose, no navigation, maxes out at 45 clicks. I used an SMD DD1 off the high level, feeding Subwoofer under center console. I detected distortion W/ Test Track 40MHz, at 31click - No distortion at 30 clicks. Hope this helps!!

@ethanheld5651 3 месяца назад

How do you remove that cover under the dash where you tapped into for the remote wire?

@pistol850 Год назад

would anyone have a picture of the actual wire diagram with the colors of the wires? I thought the dark green and the dark blue were the positive rear speakers?

@justinwilliams4009 Год назад

I followed you step by step but inonly have bass when i unplug ome of my RC cables ..

@Southern612 6 месяцев назад

How do i take that box out to connect the remote cable to the pin any help?

@robertohernandez7205 4 месяца назад

I have no sound followed instructions exactly added ground and no ground ie brown wires and still nothing . Any suggestions?

@tannermiller3031 2 года назад

What do you suggest setting the gain dials on the line output converter so as not to interfere with dialing in the gain at the amp?

@kick_then_shift Год назад

Buy a SMD DD1. Check out his videos on RU-vid he will walk you through it all. Steve Meade is his name

@kylekipfmiller6392 5 месяцев назад

Do you have a full install video??

@Cybernetic263 9 месяцев назад

Is T tabs conector any good?

@tarathunder6618 Месяц назад

Where did you connect the positive and negative from the loc

@licoreimusic4876 10 дней назад

Location for the remote wire if you are using an rca converter???

@dumbledoresarmy7569 Год назад

Isn’t that ground spot right above the fuel tank? I’m afraid I’m going to puncture it

@amaurisperez4584 Год назад

professional thanks 👍🏼👍🏼👍🏼👍🏼👍🏼

@ProvoBeastAudio Год назад

Thanks 👍

@Powerstroke904 Год назад

Hey Provo, I followed these instructions perfectly and did everything the same. When I first turned my key forward all was good sub was playing then I turned the key off to clean up some wires and turned the truck on to test run the sub and now I’m getting absolutely no sound out of my speakers 😂. I’ve checked everything amp fuse, radio fuse and wires to them. 2008 gmc Yukon xl Denali Bose system I’m guessing I fried the stock amp somehow but have absolutely no idea how that could of happened. Any idea?

@grantbelleville3828 10 месяцев назад

What did you find out?

@jordanretros Год назад

What did you do with the other wires from the line out converter? Capped off?

@kylewood9593 7 месяцев назад

Wondering the same thing

@torosantana7489 5 месяцев назад

I’m now wondering if I could tap into the factory head unit on my 05 Silverado (with the Bose system) to add a subwoofer. I think the factory radio would look cleaner. Do you think it’s possible?

@nateweiner8890 2 месяца назад

I did it

@samoantribe4790 Год назад

How does it sound tho? I see a lot of videos of how to install it, but nobody ever shows it working.

@jaysautoandmore1771 11 месяцев назад

No comment.🤔

@tylormiller5486 Год назад

Was the skar 4 gauge ofc amp kit good for this setup?

@ProvoBeastAudio Год назад

Yep, great amp kit!

@jameerchavis6135 4 месяца назад

Same thing needed to run mids and highs or is it best to just run new speaker wire through each door?

@ProvoBeastAudio 4 месяца назад

Depends, but usually if your factory wiring is in good shape, you can use a T harness or Bose amp bypass to send your signal to each new speaker. OEM wiring generally can support up to about 100w RMS.

@thebernsteinbears6137 6 месяцев назад

How much does it cost to do that?

@charleswilliams3336 2 года назад

Question for you @promobeastaudioinstallation I put a aftermarket pioneer dmh-341ex radio in my 07 Yukon Denali XL and 2 amps and 4 super tweeters and 4 midrange speakers and 2 15s I ran my 0ga power on driver side of the truck and rca's on the passenger side but I'm still hearing engine nosie through my system could you help me out with that

@ProvoBeastAudio 2 года назад

Check your grounds, clean them up. Also consider moving grounds to the frame directly. Replace RCA cables, or your radio could be the problem as well. Generally poor quality RCA cables and bad grounds are the culprit.

@charleswilliams3336 2 года назад

@@ProvoBeastAudio okay good looking out bro

@shawnbeach1421 Год назад

If im running a 3k watt amp could i still run it from the factory fuse too?

@ProvoBeastAudio Год назад

With 3k RMS, you will want to not only go directly to the battery, but you will need an upgraded battery, potentially a secondary battery, big 3 upgrade, etc.

@PabloChacon1 2 года назад

i have a 12 in my back of my tahoe running 1500 watts and i was playing music and it turned off but the amp is still on and all wires are all hooked up and no chance it blew up , idk if you know whats wrong or if someone can help ?

@caydenbowman1079 2 года назад

Possible the signal wires from the stereo because loose or unplugged

@eddyg9505 2 года назад

Will a convertor still be needed regardless of having the stock radio or aftermarket head unit with the bose system?? Thank you for the video!

@ProvoBeastAudio 2 года назад

If you have an aftermarket radio, no line out converter needed as you will just run RCA cables from the sub output of the new radio to the amp.

@eddyg9505 2 года назад

@@ProvoBeastAudio awesome thx for the reply!

@jordanwoods 9 месяцев назад

I’m following this video but I need a ground point for the line output converter I bought. Where can I do that?

@ProvoBeastAudio 9 месяцев назад

Depends where you are installing it. Any chassis ground is fine, bare metal, etc.

@keons1585 Год назад

If you have the bose sound system do you need to replace the stereo for the remote wire and rca?

@ProvoBeastAudio Год назад

Nope, a simple line out converter will do (just like we used in the video).

@keons1585 Год назад

@@ProvoBeastAudio thank you

@merk1284 2 года назад

Will it fit under second row seats?

@ProvoBeastAudio 2 года назад

The amp? It did for us.

@DJReminisce_407 2 года назад

Do you sell the mounts you used for the fuse? I’d really like to get one made

@ProvoBeastAudio 2 года назад

We don't sell them privately, sorry!

@alxa1683 Год назад

1800 Watt amp is fine to use with my vehicles single agm battery right? No upgrades needed?

@Mayjah_flexx Год назад

You’re fine. Only if you’re going 3000w or more is when you need to upgrade the wiring, alternator, and secondary battery.

@doughpywidit4112 5 месяцев назад

@@Mayjah_flexxso 2,000 watts is fine for that fuse under the hood?

@grandchampnino3708 2 года назад

I followed your steps with an after market radio. When I turn everything on the subs we’re playing something different than my radio & when I switch to Bluetooth it plays the music but the amp goes off and subs don’t play. What could be my problem??

@ProvoBeastAudio 2 года назад

A wiring issue to me. Your remote turn on wire may be connected to the antenna blue wire of your aftermarket radio instead of your remote turn on wire. Way too many variables to diagnose here in a youtube comment.

@grandchampnino3708 2 года назад

@@ProvoBeastAudio I appreciate your response. I’ll check that out again

@isaacspotify2697 2 года назад

How much would you charge for a install like this ?

@ajrivera2184 Год назад

150;

@MICHAL-ck3sh Год назад

At what point should you upgrade the factory alternator so that the electrical system of the vehicle is not over loaded with the amp drawing power?

@torrez8144 Год назад

1500watts is a good amount of power but it’s not a lot to kill the alt, a good lithium battery as the main and in the back with big 3 and 0 gauge all around and you would be set with that same setup with no significant voltage drop

@Luminous.Dynamics 6 месяцев назад

@@torrez8144 I think these tahoes come with either 120a or 145a alts from the factory, it should be okay with even a 1.5k class D monoblock

@doughpywidit4112 5 месяцев назад

@@Luminous.Dynamicswhat if i run a 2,000 watts? It should still be fine ?

@Luminous.Dynamics 5 месяцев назад

@@doughpywidit4112 2K rms? Which amp?

@doughpywidit4112 4 месяца назад

@@Luminous.Dynamics soundstream BXA4-1800 has 1,800 watts

@leonsines247 Год назад

Should have put a piece of abs under the amp... You are suffocating it for air in the vents underneath mounting it on the carpet

@BrandoEhh50 Год назад

Now she’s a hunny bunny 🐰😈😂🖤

@brandonbattle2996 2 года назад

Having problems with the remote wire. We tried every fuse on the side. Amp still stays on and it’s getting very aggravating

@Mississippidawg Год назад

It’s not on a true remote line on the head unit. Have to find it

@brianwaller7383 Год назад

In my install I had to install a switch because I was having the same problem. But I’ve since upgraded to a down for sound amp that has a Bluetooth bass knob that turns on the amp. So I don’t need the switch anymore

@d4b4y4re4kid Год назад

I tap it to an loc since the loc gets the signal from the rcas

@kick_then_shift Год назад

So you put an aftermarket radio why did you use a converter for the sub? Why not wire right into the head unit... im sitting scratching my head why you would do that. You'll never get the quality sound out of that pac like rca's directly to the head unit...

@ProvoBeastAudio Год назад

Radio in this vehicle was the factory navigation, not an aftermarket radio which is why we pulled our signal from the factory Bose sub. If you had an aftermarket unit, yes, you would alternatively run your RCAs to the sub output of your new radio.

@tannermiller3031 2 года назад

Did you not hook up the ground wires on the line out converter?

@ProvoBeastAudio 2 года назад

It's an audio ground (optional), not a DC ground, and in most instances used to help reduce ground loop noise. We didn't have that issue, thus wasn't necessary to connect.

@tannermiller3031 2 года назад

@@ProvoBeastAudio thank you. Just finished my install today and your video was my prime resource. Especially specifying which wires to splice to with the line out converter in the console. Thank you for taking the time to put it together.

@keithbutler7896 Год назад

My line out has a yellow 12volt ignition and ground, do I need run to fuse box?

@elcompacarlos5999 Год назад

Hey are you located here in Provo utah ?

@ProvoBeastAudio Год назад

Not Provo exactly (but that was the city where the channel was formed), but we are in Utah county!

@elcompacarlos5999 Год назад

Ohh okay I stay in Provo I like your videos also I need help with audio you stil doing it ?

@justinwilliams4009 Год назад

Wheres the brown wires go

@ProvoBeastAudio Год назад

Those are Audio grounds if you have any noise in the signal. If no noise, they are not needed.

@victoriabriones1895 2 года назад

Where are you located

@ProvoBeastAudio 2 года назад

Utah!

@brianwaller7383 Год назад

Anyone looking for a cheap way to install battery bus bars. Just buy mending brackets at Home Depot, get some half inch screws with nuts and got bus bars for under $20

@BRANDON830208 Год назад

I don’t have any power

@tatuado5875 Год назад

I have a 2011 yukon I already put an after market radio so all i have too do is run my rca from back of unit and remote no need for a converter correct

@d4b4y4re4kid Год назад

Correct