How To Install an Amp Wiring Kit

Подписаться 47 тыс.

Просмотров 469 тыс.

50% 1

How to install an amplifier wiring kit in your car. I unbox the Kicker PK4 amp kit, show you how to set up the fuse, how to route the battery cable, and remote turn-on cable, as well as how to set up the ground cable. I am doing this install in my 2020 WRX STI.
Kicker PK4 AMP Kit I installed (4 gauge) →→ amzn.to/3bwBQ9T
Kicker CK8 AMP Kit (8 gauge + RCA Cables) →→ amzn.to/3eJjJQ8
Retaining Clip Kit I Show →→ amzn.to/2RY5c9y
How to Remove the glovebox: • How to Remove 2015+ WR...
Other videos in this series:
How to Install Component Speakers: • How to Install Compone...
LC7I Line Out Converter Discussion: • LC7i Active Line Out C...
More coming!
__________________________________________________________________________________
→→Check out my MERCH! →→ boostshutter.myspreadshop.com
→→ www.amazon.com/shop/boostshutter This is my personally curated list of fantastic car products. Many of these you can see in my RU-vid videos. Be sure to read the comments to see why they made the list!
__________________________________________________________________________________
→ Consider subscribing: / @akqjtn
→ Instagram: / boostandshutter
→ Facebook: / boostandshutter
→ Twitter: / boostshutter
___________________________________________________________________________________
Links above may be affiliate. Using these links costs nothing more to you. I will always provide my honest opinion about the products I use and acknowledge any sponsor. __________________________________________________________________________________
Thanks for Watching!
#STI #CARAUDIO #WRX

Авто/Мото

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 183

@franciscolerma5332 3 года назад

Totally explained step by step one of the best videos I've seen on youtube

@acer5741g 2 года назад

8o8

@acer5741g 2 года назад

78i

@acer5741g 2 года назад

878

@worIdwlde Год назад

after viewing 10+ videos on how to DIY, this has to be the TOP video still 2+ years later, perfect for beginners 🎉🎉

@Dauntless.steadfast.fortitude 3 года назад

Great video, audio, tutorials, clarity, explanations & articulated. 👍👍 Definitely the best on RU-vid. Thank you.

@nickp.4915 2 года назад

Also an experienced car audio installer and this video is EXCELLENT! Love that you mentioned the true purpose and importance of the fuse installation as well as protecting the power wire with grommets and even the excellent mention of protecting the power cable if it runs near any sharp edges along it's path A++. Correctly the fuse is to protect YOU and your car from an electrical fire, not to protect your equipment! I have actually seen amp install videos that make no mention of any of this as well as claiming the fuse is to protect you gear from surges etc. Also your mention of stripping the paint for your ground. So many take the fast\easier route and think that the bolt head is "good enough" of a ground. Only thing not really mentioned is that typically power wires are separated from signal wires and power wiring is usually run down the drivers side of the car and signal wires down the passenger side of the car. Also have to LOVE Subaru's for their ease of install. It's almost like they were made for car audio installs. Plentiful useful grommets through the firewall and they even provide empty spaces in existing wiring clips as well as wire channels down both sides of the car from front to back. Really a dream to run wires in a Subaru. Nice Job!

@jonromero6248 Год назад

This is the best explanation how to install this kit!! Step by step and clearly!! Thanks a lot man!!!!

@smeyzer 4 года назад

This is great! I already know how to install it but you've explained it very well. Great video quality too. Like!!

@ManuelCamarena0725 3 года назад

Couldn’t find a grommet on my 06 accord 3.0 manual. This video helped me get an idea! Thanks, I’ll try and run the 1/0 cable this morning!

@aribaker8179 10 месяцев назад

Nice video, straight to the point, good tips and clear instructions. Very nice!

@marianonoriel3397 Год назад

Yo! Thank you! You made this easy to understand for people like me who had never done this kind of install!

@evoson5229 2 года назад

Thank you very much for the video. You explained it so well that I don't have any questions.

@CoquitoPapi01 3 года назад

This video helped me out with my install. Thank you very much.

@boodah808 3 года назад

Great quality video,keep up making more video like this,Auto shops be charging the most for the labor that’s why

@verdalebarnes45 2 года назад

after countless videos this one explained what i needed to know best

@rickygray7767 3 года назад

Great video thank you awesome info well detailed instruments.

@manuelcasasmanny6990 3 года назад

Love the video it was a lot of help

@sreerajnair91 2 года назад

Its my 11 th video regarding this, and now i can install my self 😀. Thanks bro well explained.

@joeyl1742 2 года назад

Just got a kicker comp 12 along with a kicker amp today I’m putting it in my wrangler tj. Cant wait to be bumpin. Great video btw

@heavychevy4616 3 года назад

great detailed video man! ...very helpful! thanx & god bless dude

@dirtyboy8336 2 года назад

That was well understanding thanks for the info bro if it wasn't from RU-vid and intelligent people like you I would not learn much💚

@chrisdesimone4249 5 месяцев назад

Nice work!

@rambomcclane563 3 года назад

Clean install man! Looking at getting a 2016 WRX and I’m glad I stumbled upon your channel. Been watching your videos all day 👍🏼

@RealRickR 3 года назад

Great job.

@mrj5716 2 года назад

Thanks for explaining it so well

@EddyGzzz 2 месяца назад

Best video explained ‼️

@danielferraro59 10 месяцев назад

great vid !

@xidaho4485 2 года назад

Thank you so much you made this so much more easy

@jessiemoore1849 2 года назад

This video is awesome Man U really helped me out

@3PortsDown 2 месяца назад

Great video! Easy to follow and understand.

@yaboitee4190 Год назад

Great quality video 🤙🏾

@mafosa8519 3 года назад

dude. you spoke very clearly! great share! larry

@christopherstraps2706 3 года назад

Thank you so much sir !!!

@jhonnyshadetree9505 2 года назад

Thx for the RCA info

@VonSpud 3 года назад

Excellent vid thx!

@wezzerpapier338 3 года назад

Easy explained and quickly

@MichaelRodriguez-pc3ty 3 года назад

Holy shit, this is best fucking detailed video I’ve ever seen on RU-vid. Most confuse the shit out of me but this cleared everything up for me, thanks!!!

@Elvskf 3 года назад

Good tutorial video.

@donaldlentz3770 3 года назад

I have never commented on any video on youtube ever but after watching numerous videos where they either talked way above my head or assumed that i was a amp/stereo geek like them or they just skipped steps. This video is by far the best video i have ever seen on any topic on youtube. Well done. It was clear concise and dumbed down enough for me to get it all. That being said i will not sunscribe. That’s on a whole other geek level. Good job

@SlickEd91 2 месяца назад

Really nice video on how to install a sub and amp kit

@josh8992 3 года назад

Hey man i love your videos really got me into audio in my wrx. But If im connecting my amp 4 channel amp to an after market head unit for my speakers do you need more than one rca cables?

@benjaminbryant9037 3 года назад

Great video! I am in the process of this and am having trouble with the speaker cable from my LC2I to the head unit, is there a different place I can tap into? If not can you please explain how I can do this?!

@connorridgeway3090 2 года назад

Super helpful. Thank you for being detailed and thorough.

@orangeman4423 3 года назад

Can you go more in depth on how you hooked up the acc wire

@darrencedeno3538 3 года назад

Well explained…. Step by step… I love it… well done champ… 👊🏾👊🏾👊🏾

@akqjtn 3 года назад

I appreciate that!

@dntlss 3 года назад

Its funny how times change,back in the day the first thing that hit the trash can was the factory head unit,lol,now the old line converters are seeing a resurgence. When installing a amp TAKE YOUR TIME,pick you a nice weekend, get up early,get all your stuff rounded up and call a buddy for help and get your amp installed, being in a hurry will get you nothing but problems,think about it as building a house,make it all pretty,make sure everything is snug,use zip ties,make it look bad ass,you dont wanna open your trunk to show your friends you new system and there is stuff hanging everywhere and your using solder wire for a power cable. On you power wire, the part that goes under the hood,put you some black wire conduit tubing on it,temperatures under the hood get very nasty specially during summer, this all might seem trivial to you until your on the side of the road waiting for the fire truck,the fuse is a redundancy item but never hurts to be extra careful.

@Stephensmithgmc 2 года назад

This is great

@pimpmyride62 3 года назад

how did you make your own breakout harness? i’m not sure where to find the 10/6 pin adapters

@givnofuchs5742 Год назад

With that kind of fuse holder, I use ferrules on the ends of the power cable. It protects the fragile wire strands from the screw when you tighten it down.

@newadventures9940 3 года назад

I hate when youtubers try to make things sound harder tgen they are just like this guy

@prasad10 2 года назад

Did you have to use the fasteners to secure it because in 2017 forester it fits snug. Was wondering if it will stay put or effect the wiring

@patrickpeterman8736 3 года назад

lot,s of great information; excellent video much appreciated-regarding the memory or on/off wire -connect,s to back of the amplifier and then connect,s to any power source that is only active when the key is on or car is running; is that correct-I,m installing a single channel amp for my subwoofers; the subwoofer box has a "CUP STYLE POWER CONNECTOR"- which only allows for the pos/neg cables/wires-to be inserted and are held in place with a push open-close connector-do I just cut the ends off the RCA cables and insert into the connector cup?? THANK,S PJP

@Cm5-Anthony 2 года назад

Hi in my car I saw 2 wires that looked like speaker wire or something, and next to it there was 2 rca connectors with its cable, and I was told there was a amp in the car before but they took it out. I see no connectors on the battery tho so I’m not sure if the wires are there if if they aren’t wired to the battery or another source of power

@dthor5150 6 месяцев назад

VERY BASIC EXCELLENT INTRESTING INSTRUCTION. TEC1.

@NLittlefield 2 года назад

Where you have the FuseHolder Located Underneath the hood shroud. Did you do anything to keep from water trickling down? I’m alittle worried that in that location the water could get to it.

@shanembradshaw 3 года назад

Sending the amplified front speaker signals through the starlink data comm module didn't give you any issues?

@Will-yk6qr 2 года назад

I am an experienced car audio installer. I am very pleased with your video and your careful attention to details. You nailed all the key points! I have a 2020 WRX that I had to do the same thing with. I installed a Cerwin-Vega VPAS12ST powered sub, which sounds outstanding. I upgraded the door speakers to Alpine Type S 6.5" coaxial and the dash tweeters I bought the Kicker OEM replacement that Subaru sells. The stock head unit struggles to give those speakers the juice they deserve so that'll be my next upgrade but it all sounds totally amazing. Great video. I will share it with other enthusiasts as a quick reference 😉

@everetteugene676 3 года назад

Thank you so much. This is by far the most concise and clear video of installation I have found.

@SonikJesus Год назад

After you’ve exposed the bare metal to connect the grounds, do you recommend spraying clear over rhe connection to prevent rust?

@theartexhibit7792 3 года назад

What if you don't have aftermarket head unit for the remote? How do i wire it then? Buying an aftermarket head unit is not an option for my vehicle..

@dustinchism3650 Год назад

This guy was great at his video .

@henryantonio7549 Год назад

Thank you for your videos I found them so helpful. I did the same set up you’re showing on this video and I have one question to you. I live in Texas and it gets so cold here in winter. I use the heater most of the time blowing to the feet and my concern is the amp and the lc7i could/will overheat once I turn my heater on. My question to you is how did you solve this issue? Is there a way to disconnect/eliminate the passenger side heater vent to prevent this?

@goosunsafetyfirearmtrainin9561 3 года назад

Awsome video, how did you create the wiring harness for your factory radio. I have 2020 WRX Kicker factory upgrade JL all in 1 12in sub. Not happy with sub going to get kicker, sub box. and amp. I want amplify door speakers also. I taped into fuse box for remote turn on.

@yovanishernandez675 Год назад

Hello I want to install a rca on my honda odyssey 2009 how do I know which wire to connect it to is there something say subwoofer cus that's what I want to put my van.

@maccheese3088 Год назад

Hello I’m just wondering because I had this done to my corvette 2008. I had a fuse box and some wiring connected from the battery of the car directly to the amplifier of the car because the amplifier was not getting enough power. Just wondering if when I turn my car off the battery is being drained still ?

@greg4442 Год назад

I conect the remote to the red cable (acc) of head unit (radio) will it work ?

@RaulRM3 2 года назад

Thank you sirrrrrr

@akqjtn 2 года назад

You are most welcome!

@Nightedition5.7 6 месяцев назад

Hey if changing from a 8 gauge amp kit to a 4 do I need to change all the wires or just the power cable?

@OMGitsFLY 2 года назад

Hey i have a factory radio too and w the converter the yellow wire can you cross it to the battery for power instead of alternator? And does it matter what voltage i use for the wiring kit i have a mrv m500 alpine amp and a 12in kicker sub

@greeed_ 2 года назад

So if my battery is no good anymore and I need to change it out, is there anything in particular or certain practice with the ground fuse connected to it that I need to pay attention to it? Or can I just move the terminals from the post and put them on the new battery no problem????

@Jswervo215 2 года назад

How do you find upgraded door speakers & amp kits that fit properly for your car? I wouldn’t even know where to start looking

@Altruistic00 3 года назад

Is there a point where the fuse is too big for the power cable/amp? For example my amp is the Infinity Primus 6004a & manual says to use minimum 30a fuse. Do I go slightly above at 40a or I can just go straight to 60a or even 100a?

@Bl4ck7411 2 года назад

I have wire on my aftermarket stereo called (Amp cont) is this wire for REM wire on the amp?

@chivatech 3 года назад

I just got a new 2020 WRX & I’m debating if I wanna open this can of worms. I have a JBL MS-8 processor and a JL Audio 10W7. How hard is it to work on this car?

@B12Row 3 года назад

Can this be used instead of speaker wire, it would make it so much easier to just run this to the amp from my JVC head unit instead of running additional wire from my front 2 speakers and my rear 2 speakers? I have a 13 Chevy Silverado ext cab and I’m replacing the 4 factory speakers with 4, 6-1/2” Kickers speakers.

@MendingSilence 2 года назад

So if I use LOC I don’t have to remove radio thus tapping into rear speakers

@johngray2526 3 года назад

How and what did you use to crimp the fittings on

@michaelmarquez6133 2 месяца назад

Thank you, explained without all this stupid music or distractions. I hate when i put a video and they explain things like you should already know. I have a question not sure if you will see this but i have a 5 channel amp that i plan to run my sub and door speakers should i install under passenger seat or in the back ? Thanks

@tonydavila7304 3 года назад

I have a treo ssx 800, is that any good amp for my car?

@airigone1257 9 месяцев назад

Can I have the bass knob and have the controll to the radio?

@mrtv8477 2 года назад

how can amp burn without burning battery line fuse (60amp) and amp fuses (30amps x 2 fuses). i thought fuses would burn before the amp does! but my amp burnt :(

@jarod513 3 года назад

Did you have an issue with your airbag light coming on after you pulled your seats out?

@cameronshero1409 3 года назад

These videos are super helpful! Thanks for making them so clear. I will be installing a Sound Ordnance b-8ptd under the driver seat of my 2019 WRX. I plan on running the power line the same way you have shown in your video. Couple of questions: 1. What is the best way to route the high-input (speaker wire) and running power line to the other side of the car? Would you run it under the center console and then up the door trim, through the glove box, and behind the head unit? 2. There is a remote line that is 14' long I am thinking under the dash would be the best place to install this but not sure how to access that area. Would you recommend it going in another area? Would love your input and advice. I am a newbie to all of this, so forgive my greeness! Thanks for anything you can provide.

@cameronshero1409 3 года назад

@@akqjtn So it is okay to run the power and the speaker wire together? I thought I read that it could create some 'interference'. Going up the console seems best because it would be easiest to install the remote as well.

@tonycervantes4816 2 года назад

What size you cut of power wire to go in on the fuse????

@JuanAlvarez-my4zh 21 день назад

So I’m running 4 Speakers of 250min to 500 max each what amp gauge wire would I need?

@robbiegoldfinch8137 11 месяцев назад

What do I plug my amp into ? Negative or positive terminal?

@jermzmoney8319 3 года назад

how can you say ofc is not superior i seen them do multiple amp dynos and it seems to add like 20 more wattage than cca

@aricroy4258 2 года назад

all cool but you didnt explain where to install the wires into the speaker

@jamesgiddens8078 2 года назад

There’s no ground from the negative battery terminal to the frame? ?

@iraklijanashvili423 Год назад

Can I connect the ground directly to the battery?

@vijayjoon1 3 года назад

Do we need to give ACC or remote supply to amplifier(for turning on and off) in case of we using speaker input instead of RCA ?

@vijayjoon1 3 года назад

Boost & Shutter i bought sony xm-n1004 amp, do that have above said GTO, im Noob here so lemme know thnx

@rockodashpr 3 года назад

This is over my head I live in FL this also will be my first aftermarket stereo system i have Front and rear alpine door speakers & a Alpine Halo9 stereo also i have 2 12 kicker L7 subs with a 2400.1 watt Kicker amplifier Can someone give me a idea what a professional installation should cost me so i dont over pay

@basharzaim 4 года назад

I want to install 0 gauge as main power and main ground. However, I want to install distribution blocks after that to power exact similar setup you are having with LC7i and two amps. I am planning to take 4 gauge power and grounds from those distribution blocks to 3 devices. do I need to install fuse for each line or the main fuse after the battery is enough? How much amp of the fuse you install it after the battery. I like your video, they are detailed and clear. Good job.

@Dungottie 3 года назад

Run 0gauge with a fuse to a distribution block, then fuse all amps with the own fuse, to get what fuse you need to use for each amp look at the owners Manual for each amp for the power draw for that amp, then you can you the correct fuse at the battery.

@shannonkelly1602 2 года назад

i got an amp and need help to get it hooked up to my double din

@eb121209 3 года назад

On your LC7i, did you ground that to the same bolt as you did for the amp? Or did you ground it to your amp?

@supertrippyjohng 3 года назад

Amp

@osalcedoucmsae 3 года назад

Do you need to run 2 pairs of RCA wires to use a 4 channel amp in bridge mode? (Bridge channel 1/2 and 3/4)

@drummonkeystuffuk1875 3 года назад

depends on the amp really, my hertz amp you have to attach one pair of rcas to the red inputs on bot a and b channels, then change other setting on the amp.

@tonycervantes4816 2 года назад

What size is that kit sr ? And what size of fuse

@chinweelim8299 2 года назад

Do We need amplifier to power the car speaker? ☺️

@jimmylin6566 3 года назад

If you are running separate amps (4 Channel + mono), do you just run one power cable and split it into the amps? Also, can you combine the two grounds into one cable and into the ground bolt?

@drummonkeystuffuk1875 3 года назад

@@akqjtn I dont recommend a combined earth point as you can cause an erath loop - which causes noise issues/ alternator whine to come through your speakers etc.

@supertrippyjohng 3 года назад

@@drummonkeystuffuk1875 loop is when they are separate grounds and cause noise wine ect

@hectorperez6293 4 года назад

nice video,how long between the battery and the fuse holder?thanks

@MilankoDebil 3 года назад

20cm

@wkjeeping9053 Год назад

Anything above 500 w amp should be running a 2 gauge wire. If you dont you are actually are shorting your amp of power. Also run a capacitor or double the out put on the factory alternator. Most cars run a 120 amp. Get at least a 200 amp alternator out put. Your lights won't flicker