2007 - 2014 Chevy GMC Silverado Sierra Backup Camera Install

Подписаться 129 тыс.

Просмотров 126 тыс.

50% 1

Parts linked in the description below!
Watch a full tutorial as a 2007 Chevy Silverado will have a brand new license plate backup camera installed to an aftermarket radio. We will be using the Wordcam License Plate Fram Camera to a Pioneer radio installed in a previous video.
This video applies to GM Trucks such as Sierra and Silverado models or years 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014. This video also includes dash trim and stereo removal, camera wiring, and installation.
Click here to see a helpful backup camera general tutorial:
• Car Backup Cameras Exp...
For a tailgate handle camera install version, click here:
• 2007 - 2014 Chevy GMC ...
Click here to see Part 1 where we installed the aftermarket radio:
• 2007 - 2014 GMC / Chev...
For the radio install Bench seat version of this truck, click here:
• 2007 - 2014 GMC / Chev...
For the front door speaker / tweeter install, click here:
• 2007 - 2014 GMC / Chev...
For the rear door speaker install, click here:
• 2007 - 2014 GMC / Chev...
To see how to keep your factory DVD OEM flip down screens working, click here:
• Keep your DVD screens ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Backup Camera (Amazon Associate Paid Links):
*License Plate Frame Rear View Backup Camera 170° Viewing Angle Universal Car License Plate Frame Mount Waterproof High Sensitive 8 IR LED Night Vision Reverse Parking Aid System:
amzn.to/34WoPox
Other Parts Used (Amazon Associate Paid Links):
*Pioneer AVH-210EX Bluetooth Radio: amzn.to/3vTBZOS
*Metra 95-3305 Double DIN Installation Dash Kit: amzn.to/2TNgGQY
*Crux Wiring Harness Adapter SOOGM-16 For Bose / Non-Bose Systems: amzn.to/2Rt0OCp
*USB / AUX Flush Mount Kit: amzn.to/2SYXEGS
*Metra 40-CR10 Antenna Adapter: amzn.to/3po1uWc
*Pioneer Microbypass: amzn.to/3cmvNaB
Disclosure: As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

7 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@ProvoBeastAudio 3 года назад

Parts used linked in the description below! Also for a tailgate camera install, click here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nchvTKKen5U.html

@michaels2208 3 года назад

Just bought an 07 sierra. These are amazing videos. It takes some of the fear of doing the install myself away.

@joyuncovered 2 года назад

You're a great teacher, easy to understand and positive! Thanks for the help!

@biggtribes2780 3 года назад

I have the same truck, and found the OEM back up camera on the tail gate handle and thank you so much for the tutorial

@cameroncampbell6931 2 года назад

This video was WAY too good! So clear and direct in all the explanations. Idk if you work for them but you definitely sold me on the product haha

@juanmaciel983 3 года назад

Thank you so much wish i had seen your video before investing a couple hours trying to figure it out

@rodriguez100sin 10 месяцев назад

Man this video answer all my questions. Thanks for sharing.

@ikeechoshade1709 9 месяцев назад

Thank you for explaining the wiring thoroughly, all the videos I've watched on this subject don't explain very well, thanks again...!!

@ME1D 2 месяца назад

What a professional, thanks for sharing this amazing information ❤❤❤❤❤❤

@user-sz5zj3mb6c 11 месяцев назад

I got it process of elimination works fine. Thanks.

@unklebidii Год назад

Awesome. I want to do this on my Chevy Silverado 2009. I assume it's a similar if not exact same install? Great video. I'm excited.

@dylanmuoio1404 3 года назад

I believe that I have a smart harness do I have to do anything with my red wire that would’ve connected to my reverse trigger wire, or can I leave it alone

@mduran613 3 года назад

whats the length of the rca wire? the wire that came with my kit is 16ft but it doesnt seem like its long enough

@cameronhindmarsh95 2 года назад

What would I need to do if I want to wire the back up camera (or a front camera) to a rocker panel switch??

@Flinteastwood420 11 месяцев назад

I"m using the RP5-GM31 interface with a Pioneer radio. Can I connect the red wire directly to the purple/white reverse trigger coming from the Pioneer or do I connect to the PAC interface?

@CraigHeilmanVlogs 9 месяцев назад

What wire is the ground I have two black wires on my reverse bulb the middle one???

@cadenhicks3136 3 года назад

I got a back up camera for tailgate and Where I wire purple trigger wire?

@matt771j Год назад

I installed this exact stereo and backup camera and now my truck died I’m assuming from a draw on the power when the truck was turned off. Any idea why?

@Kingzeusss. Год назад

So I have my ground and my power wired to the reverse but I’m having interference with the signal. I contacted the head unit company and they said I have a canbus and to wire the power directly to the trigger wire. But my ground is still at the reverse light, should I find a different ground?

@xaviercoalbrooke1346 3 года назад

How long was your video cable?

@MrRickyp1129 2 месяца назад

Hello, I wanted to ask a question because I am already desperate, I bought a tailgate camera for my 2007 silverado, I connect it to the radio and it tells me that there is no signal, I don't know what to do or if it is some problem with the settings on the radio...thank you

@joserramoswizards3158 2 года назад

I have a chevy tahoe 2007 I want to install a navigation sistem stereo and back up camera..can u give it to me a price to instal

@user-sz5zj3mb6c Год назад

Can you tell me which one of the three wires is the power on the reverse light. Green, Black or Black. I have the same vehicle.

@Flinteastwood420 11 месяцев назад

Did you ever figure it out? I just installed mine using the black wire that was furthest from the green wire and it is not working. I suspect I used the wrong the black wire.

@DiyExtracts 3 месяца назад

is it possible to run the stock rear view cam on this stereo on a 07 suburban ltz ?

@carlossosa2940 3 месяца назад

how i know if this harness fits my car i have 2010 silverado 1500 ,, but aftermarket kenwood radio ? with 8 pins ,,,

@film-john 2 года назад

Not sure if anyone still monitors this but did you do any extra waterproofing on pulling the wire through that grommet on the floor? Seems like that is introducing a perfect leak situation and I'd like to know how to make sure it's watertight.

@ProvoBeastAudio 2 года назад

Moldable silicone puddy is what we use to help seal around wiring.

@chrishemingway4491 Год назад

When you put the ground to your tail light can’t I just run my ground to any ground at the back of the truck because I have aftermarket tail lights on my truck and don’t feel like tapping into them they were a paint in the ass to get in??

@djdb05 7 месяцев назад

Need to show how you ran the wire from back to front is there a hole or wire harness in the truck that runs out of the cab you used?

@ProvoBeastAudio 7 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nchvTKKen5U.html

@ethanlenoir4096 2 года назад

I wired mine like yours and the lights on it dont work and the picture is really blurry?

@domino2339 3 года назад

I have that smart harness, but my backup camera has a purple wire. Do I need to tap into that wire or leave it along because it’s connected to the smart harness?

@latifenieto5685 2 года назад

Did u figure it out

@F0CKSTR0T 2 года назад

When I wired the radio the first time, I connected the red acc 12v wires from the smart harness to the radio. Can I just use a t tap to connect the camera video wire right into those?

@ProvoBeastAudio Год назад

Yep, but depends on how many amps are put out on the accessory wire by the smart harness.

@ethanyarbrough4003 3 года назад

How do I Hook up the factory camera

@TheLVTuner 3 года назад

Do you know a good route for the wire on a Tahoe? The plate is on the rear hatch, so it has to come down from the top.

@ProvoBeastAudio 3 года назад

Here is an old crappy video, but nonetheless, some pointers: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DjTXswCyN5A.html

@michaelnegron9630 Год назад

Great video. The camera went black a week later. Reverse still activates the camera but the screen is black. Any ideas how to trouble shooting this?

@ProvoBeastAudio Год назад

Sounds like an issue with the camera power / ground or the camera itself went bad.

@gerardo.morales 3 года назад

Do you know why I get a black screen instead of live video? I have a very similar camara by Atokit, it has white leds instead of red, and a AVH-X1500DVD Pioneer stereo. I have it on my 2007 Silverado new body style. I connected the wire like you did but no luck.

@fbody23100 3 года назад

I just did mine and it was really easy. I didn't wire it like he did but instead wired it up to the driver side taillight. U just tap into the wires for the reverse light which green is positive and black is negative (their grounded inline so there is 2 black wires go with the middle one.) Then I didn't bother with the power wire coming off the signal connection. Doing it the way I did just gives power to the back up camera when the truck is in reverse but will work fine.

@C8corvetteobsession901 3 года назад

Turn your rear view off

@Kyle-ev4fk Год назад

I am trying to wire my camera (Esky) to work with reverse and be able to switch on the pioneer screen (AVH-270BT). The Pioneer has the manual control and the purple switch wire. The only way I can think of to make this work is to use a remote switch parallel to the reverse trigger wire. Any better ideas?

@ProvoBeastAudio Год назад

Power the camera off of accessory. You can do that using the little red wire off of the RCA video cable. Connect that to accessory at the radio. Your smart harness should be providing the trigger wire. We wired it just like that in our install in the video.

@Kyle-ev4fk Год назад

@@ProvoBeastAudio Thank you for the response. I installed the stereo last night without the camera because the cable was too short for my suburban. The vehicle battery was very low this morning barely started and the pioneer would not turn off even with key out of the ignition and kept rebooting every few minutes. I see that you work on a lot of this era GM vehicles and pioneer units, have you ever experienced anything like this? Thanks again. Now I have to figure out why the BCM is not communicating and allowing the truck to start. BTW do you know Matt Wetzel? 😁

@mark3704 2 года назад

What’s the model of the radio I’m looking into doing this to my 2011 Silverado

@ProvoBeastAudio 2 года назад

Parts linked in the description below!

@candicebarnett5245 3 года назад

My wire harness has everything but that purple and white wire ... what should I do ??

@ProvoBeastAudio 3 года назад

Check with the radio manufacture to see what wire is the reverse trigger.

@JJMRJORDANJR 2 года назад

do you have to wire the cam to the reverse light power and battery power

@whitelemmo3931 2 года назад

im trying to figure that out too. i think its powered from both

@whitelemmo3931 2 года назад

this video explains it a little better. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rHORKUqlEM4.html

@amyumphress7627 Год назад

The pioneer microbypass part link to Amazon doesn't work. Can you send me a new one? I intend to follow your instructions to a T.

@ProvoBeastAudio Год назад

here you go: ebay.us/RVf61w

@abrahambenitez1865 3 года назад

I have a 2009 GMC Arcadia and it had a backup camera and the cables are inside my car and I brought a new one

@abrahambenitez1865 3 года назад

But I think I messed up the new backup camera cables going to the old one

@StitchDGlitch 2 года назад

That little red wire confused me.. I don’t have a reverse trigger.

@natemeisner297 3 года назад

do you have to ground the wire to the reverse taillight ground or can you just ground it anywhere?

@ProvoBeastAudio 3 года назад

You can really ground it anywhere, so if there is one at a more convenient location for you, go for it.

@topnotch9633 2 года назад

What stereo is this ? Factory aftermarket

@ProvoBeastAudio 2 года назад

Parts linked in the description

@rightsidelanechoice7702 3 года назад

So the purple reverse wire doesn’t need to be connected to anything with the interface box?

@ProvoBeastAudio 3 года назад

It does, it needs to be connected to the reverse trigger wiring on the wiring harness adapter.

@rightsidelanechoice7702 3 года назад

Provo Beast Audio Installation ok well mine doesn’t have the steering wheel controls or a factory back up camera.and I’m trying to find a back up lamp power source somewhere closer to the deck than the tail lamp area.

@latifenieto5685 2 года назад

@@rightsidelanechoice7702 did u figure it out

@rightsidelanechoice7702 2 года назад

Grow House Records yah I got it thanks!