pretty good. I make the money on keys with remotes, once you retrieved that pin I would have programmed it in the car to program a keyless entry remote/key just to make more money. I have had people complain about a regular transponder key. They want the remote.
I really liked all the details you provided step by step except the filming in some parts which was not showin what you are doing and the light reflection on the ipad screen.
LOVE THE CONTENT. The second you said Pacifica system I shed a small tear. Ughhh the worst. Also what are you using for the memo pad on the door?? Love it. So much better then writing in the dirt on the door haha. Condors usually cut the clamp if you have the key a little to far back. If you push it a little further up even a pinch past the stop line the. Then when it checks for tip position it won’t go far enough back to knock the clamp. Not that it’s a huge deal just annoying and dulls bits
How often do you use the clips to clamp onto the eeproms?I've heard it's a bit hit and miss trying to read them that way?Most people tend to desolder the chips and read them off the board,what's your experience been?Thanks.
I have a jeep liberty 2003. Apparently the eeprom there in the skiim is not 85 eeprom.. Could not pull the pin for the car. Anyone knows how you go about that
Haven't looked into the IM608 but I assume it is possible to clone the chip and write to a new SKIM/SKREEM module in case it is damaged due to theft recovery. Excellent video, keep them coming.
How do I program a fob for locks tailgate & panic, my old one broke My key is separate and works fine. 03 Liberty. I'm not paying $200. I'll just use the key a pain but that's to much
@@monsonlockandkeyyou're lucky. I can't get any dealer around me to provide that information. Claim it's "Illegal" to do so. Have to pay some dude in Bulgaria for the info. At least so far it's been valid.
what if you need to program a remote head key? just use the pin code and do the programming in the car? Do you know if there is a on board method just for programming the remote?
Hello magical soul! If you're bored with everyday life, watch the latest crime documentary video and get lost in supernatural events. This video will take you to a fantastic world!
Hy thanks a lot for your time it's really amazing video i need to watch it again. But as u said the ignition is 8 cut if so how can the key turne the ignition on? Like i did a cut same on a toyota yaris 15 through the door lock cylinder while i had to cut the last bit on the key manually to manage turning the ignition on!
@@monsonlockandkey wow insta code u used the programer on u phone i see. That's why i new that I've to watch it again very informative video but sadly insta doesn't work in iraq. So I've other connections in US if I'm stocked for help. How do you pay 4 this app?
i'm in Australia so i can't bring my car to you ,but i need to get this done to my car and over here i will need to take out a home loan to pay for it mine is a 2007 kj and my SKREEM/SKIM is a 5wy7627b is this the receiver for the fob/keyless entry too and can they program it the same way
great vid, subscribed! im wondering what resource can I consult in the field to know which specific eprom chip to connect to (in this case 95080) also knowing which pin is number 1
@@monsonlockandkey yes not only i dont wanna practice the course amd probably the best one as my first eeprom training job but also because i am trying to make a remote head key
Not too bad. Does cost a little extra for getting the pin from the eeprom. But pretty easy job after you have done it a few times. I got some BMW and Mercedes Videos coming soon.
@@stevehenderson5176 Also, I'm wondering why not just pay the fee to buy the pin. Seems like this takes a lot of time and effort. Are you sure it's worth it ? I could see it being worthwhile if the immobilizer had been changed and the original pin was invalid.
@@mrdman094081 That's precisely why you would want to do it. It's quite common to have modules and PIN codes getting swapped around for older vehicles. If the dealer PIN is no good, you'll be out $$$ and have to do this anyways. Plus it's always handy to be able to do it yourself. The fee doesn't seem like a lot but that is money that should be going to your pocket and not the dealer.
Really Do you have the correct chip selected and you're on pin 1 correctly re seat it a few times. Or go under programmer and select the chip manually.
@@monsonlockandkey Thanks for the reply man. I did everything you did. Alredy like 20 times. I have the same tools as you. I even went to the junk yard and got another module. Im getting the same "the data is invalid" message. I'll compensate you if you help me. I really want to know what's wrong.
@@monsonlockandkey I’m new to MB Ive bought lots of eis and I have vvdi MB and autel 508 with xp400...I bought some keys from xhorse for MB I’m looking around to give my customer quality keys so in Terms of models I’m New go it!