Chance to play with the IM608 and read pin code Check out my website for details on training and free downloads! handsonautotraining.com/ Check out and follow Hands on auto training on Face Book! @handsonautotraining
Thanks for watching. I am impressed with the 608 for the most part, no functions for a '14 es 250 smart box replacement that I see,.. Let me know if you want me to post what I have chance to do with it..
Yes! I thought that was great showing that for the immobilizer side of things, something that helps even seasoned techs get a better grasp of how the system works.
I ended up buying the AutoProAPP pad for my immobilizer stuff but I’m kind of wishing that I got that Im608 instead. Thanks for the info Brian really do appreciate it have a good day sir
Yeah never seem to have enough tools, always walking that tight rope as to whether or not it will pay for its self 6 months to a year... I have alot to learn with this tool, will share as I get opportunities.. have a great day!
I’m about to get one myself. I already have multiple scan tools for everything else including an Autel so I’m thinking about saving a few bucks and going with the im508 since all I would really use it for is things like in this video here. I don’t need wireless capability or anything like that. I just do the occasional key programming and mostly module replacements so the 508 should fit the bill for around $1200. I figure that’s worth it just for the pin functionality alone.
Does the Autel IM608 have the ability to virginize a used SKIM module? Meaning can I take a used SKIM module and change the PIN and VIN to use it in another car? I am mainly interested in pre-CAN PCI bus vehicles. I cannot find this info. I know it will pull a PIN pre-CAN but I don't know if this will also virginize a SKIM.
Thanks very use full inf pl advise can I rest Toyota 2012 Smrt Box to program a new key using a virtual key I can generate via ABP112 smart key simulator ten add a key Thanks again
I just need to ask have u used the IM608 to replace a pcm for Hyundais with smart keys, I am having difficulty swapping around a used pcm for an 09 Genesis BH. Great information as usual Brian, Thank u very much.
Brian thanks for the informative video , just curious would you suggest this AUTEL IM608 as a best all around scantool money can buy and if not what would you suggest . I am seeing the introduction of the AUTEL ULTRA how do you feel about that do you think you should have waited thanks again please keep the great videos coming !
I have a 906TS and have been over all very satisfied with its performance and capability. (I am not strong on euro but I have been able to code a few modules wiper / cem on vw audi) I purchased the im608 not so much for a diagnostic scanner but for the immobilizer functions. I do not have enough information on the ultra to give advice, it seems like it will be very capable of course, but no have the immo functions that I need.
It actually pulls the pin on most, even 01 to 03s with the Pacifica systems: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6Q8isHZXd9I.html The IM608 Displays a vehicle list shown at 2:47 in this vid.. but.. there might be a laps in 04 - 07 Caravan. You can Clip onto the EEPROM in the SKREEM unit and pull/read the dump file no problem with the XP400 that comes with the 608: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-afZt04F7jlc.html
Brian i have a dodge challenger 2010 rt manual i replaced the pcm module. the key works the functions but does not release the ignition for the car to start what could it be? please i need your help
Just to confirm. You were connected through a J-2534 to do all this? Or can I copy an original PCM, and transfer it to a used PCM with just the Autel? Seems like everyone always skims over this part. Autel advertises it as having ability to program PCM, write VIN, etc. But everything I find says you need J-box for this, and Autel doesn't come with a J-box.
Doing a used ecm in this application, if the used ecm has the proper calibration , the autel takes care of the functions required. In fact if you have the pin code a standard autel 906 series or above will give the function "pcm replaced " in the wcm special functions.
I'm trying to program a Dodge 2010 1500 trying to add new keys The win is locked out because somebody did too many tries without the pin code Do you know how to clear the win , so I can program these new keys I do have the four digit code now from the dealer
Thank you Brian I heard that on one other place That might be a good video to make also it's not anywhere on the web , I have looked The autel I have says three tries and it locks you out I just tried once and it locked me out Thank you sir for your videos thank you for the reply I sure appreciate it Going to do what you said and retry Using the autell 906BT
@@vencentbauer witech short term $55 , tech authority short term 26.95, this is for access to certain reset procedures like restore configuration. Programming via witech will require vin subscription $35 for 1 vin for 1 year