2007 shadow vt750 aero vacuum line california emissions hose removal ep7 

james yamane awesome 🤙🏼. the block off plates help alot with back fire dont they haha

ALEXGSXR im hoping so. Ive not started the bike yet lol. Ive cleaned up the bars: relocate the killswitch, headlight switches, changing my key to a switch, putting my overlow coolant in the front, removing my turn signal, etc. this shit aint easy but its fun.

Hopefully it works well for you 👍

Goodluck ma dude 🤘.

@@ALEXGSXR l

No problem. Ride safe 🙏

Scott Walrath NICE. I need to adjust the air fuel mixture screw rightnow.

Hey man how did you know which plugs to plugged and which ones to keep my exhaust is leaking fuel and so was my vacuum lines before

Mayra Salcedo yes i plugged it. i watched a couple random videos/saw some pictures and it looks like it gets plugged so i did

🤣

Erik Diosi i dont see why that would be a problem . you might have alot of backfiring from the exhaust. so you will need to make or buy reed valve block of plates. but idk what bike you have

Rhenjay no i just left them on

@@ALEXGSXRokay thanks!

Rhenjay Yeah I just havn't done a whole lot of research on those hoses. idk if i need them so it doesn't over heat

@@ALEXGSXR yeah I just kept my on too and hadn't had any issues so far and I added AIS plates! Thx

Mayra Salcedo same. if not even better honesty. going to post a video soon about how its working

I just did it to clean up the area but after I re tuned it the bike did run better .

Dam I'm not sure man but you can record yourself taking everything off and if it doesn't work you can put it back on.

Mikel Zuñiga no se de esa Moto. buca" TJ brutal airbox removal" en youtube alomejor el tiene un video.

a year late but i have vance and hines shot shots

I don't know honestly. I risked it doing mine. I recorded it so that I can put everything back if it didn't work but it turned out well.

Does your petcok have a spot for a small vacuum line? checked your vacuum hose ,if you have one maybe it's not working. Also those white things at the bottom were just some sort of secondary air filtration I believe.

@@ALEXGSXR so these bikes don't have fuel pumps?? It'll run if I put my hand over the carb

@@royramirez4567 I'm not a pro but I don't think they have fuel pump. And if it starts with your hand over the carb maybe it's sucking in to much air if you took off the air filter so you might need to clean the carb and jets or get bigger jets for your carb to balance the air to fuel ratio

It was fine open

It's still fine

gustavo lopez asi c queda al aire.

ALEXGSXR gracias!!

james yamane i did not re jet my carbs it was still fine. just had to buy the block off plates i mention in the video because it was back firing really loud . didnt want that much attention from cops

ALEXGSXR what was the block plate for?

james yamane i believe it lets less air get injected into the engine so it reduces the backfire

ALEXGSXR 👌 got it!

You should do a video on flushing coolant👏

Yes

Julian Furtuna you have the hoses on the bike but you dont have where to connect them on the carb anymore?

ALEXGSXR yes,I don’t see where they could go in🤦‍♂️

Julian Furtuna TJ probably removed the area where the hoses go. in one off TJs videos he says that you don't need them connected. I'll try and find it for you

Julian Furtuna on tj video called" honda shadow single carb performance secrets" at 10:00 minutes it shows what he might of removed.

ALEXGSXR yes,I looked at the video,I believe TJ already plugged the holes for the coolant so now i have to figured out a way to plug the ones on the bike I guess Thanks again Alex

Alex Ibarra tengo que connectar el mio todavia porque se lo quite. uno de estos dias lo subo

Pero explica porfavor después de quitarle las de vacío esque ala mía se las quitaron y no sé cómo ponerse las me podrá pasar su cuenta de FB para ver si me puede apoyar ?

Alex Ibarra despues de quitarle las de vacio?

Tienes alguna cuenta de FB para explicarte mejor ?

Bud D Yes, it was running good but then i put a velocity stack air filter on so right now I'm going to try and make a video on trying to tune it

@@ALEXGSXR K cool. I have a vtx 1300 and I have a 2008 vt750 chop I'm finishing. Bro do you have an email by chance? I need a few locations on stuff and you've already done everything I want to do to clean the bike. Where is the rear coil mounted originally? I'm doing a full custom battery box and wire tuck. Its been a long project and I cant remember where the rear coil was mounted originally. I live in California. I do lots of tuning so if you run into trouble let me know and I can help ya. I'm getting to last few things before this project is finally done. Hoping to have it running saturday. It has under 500 original miles on it lol. I literally just road it some stock and it's been apart getting built ever since.

Bud D Locations on what ? I'm going to try tuning tomorrow a little I'll see how it goes. are you going to sell your bikes?

@@ALEXGSXR did you read that whole last message? Tap the read more on my last message and you'll see.

In description below video

PAUL GOMEZ you might be shooting big flames out your exhaust

ALEXGSXR lol idk dude i have my motorcycle apart and doing as much as i can to bobber it out. La linea para los white canister deberías dejarla. A mi me paso hace tiempo that when weather got really hot el coolant lo mandaba para ese reservoir y como no lo tenia it will spill everywhere

PAUL GOMEZ i think i left it on. the antifreeze over line that goes to the white canister.

Yeah that one. I mean every bike rides differently mine had to have it but it’s whatever it doesn’t bother me as much as the freaking emissions lines. What else are you doing to your bike????

PAUL GOMEZ painting the small gas tank. new headlight ,new foot pegs ,sissy bar, short rear fender

khairy shaban i think its similar. the channel tj brutal customs has a video also maybe its more like your bike. i would just follow the video while looking at your bike to see if you have the same stuff

is your bike still work good ?

khairy shaban yea no issues for me at all. i did add the block of plates that i mention in the video because it would shoot out flames when it back fired. it was cool to shoot flames but it was loud

this is grate man i hope do the same for my bike i have lot of back fire

khairy shaban maybe the block of plates will help you. also you might need to adjust your air fuel mixture screw

holla estas preguntando porque quiete las mangeras?

Si no entiendo el motivo

para que se vea mas limpia la moto con un tanke de gas mas chico. menos mangeras

Y no afecta en nada? La moto sigue funcionando bien?

gustavo lopez si todo esta bien. nomas ocupas comprar o hacer unos "block off plates" para tapar los reed valves. si no quieres que truene mucho tu mofle. voy hacer un video en eso pronto

??

@@realwon6132 yes

lion jooste mixture screw needs to be adjusted. that helped mine

@@ALEXGSXR thank you for such a quick reply , I'll try that and come holla back haha thank you

hopefully yours is easy i had to cut into my carb to adjust the screw because i didn't have a D wrench.

@@ALEXGSXR Do you know any tricks on how to set the 2 carbs correct it's bogging much less and but still is ... luckily mine was open already

lion jooste i think you start with both screws all the way in and turn them out 1 turn at a time. if that doesn't work you might need bigg jets

Mayra Salcedo its still great. it was back firing alot on deceleration so recently i removed the reed valves and installed the block off plates they removed the back firing

ALEXGSXR will this work with my 2006 Honda Shadow Spirit 750?

Chauncey Wilson i do not know if you have the same vacuum set up sorry. i don't want to give you wrong info. ill try to check for you

ALEXGSXR thanks for responding

Chauncey Wilson ill try to find a forum or video for you