No video :(

2009-2013 Subaru Forester front window regulator replacement

Подписаться 51 тыс.

Просмотров 14 тыс.

50% 1

Power window doesn't work, not working? How to diagnose, and fix a window regulator on a Forester. This was the passenger front. 2010 2011 2012 09 10 11 12 13
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@jandcb5689 Месяц назад

I appreciate how you get right to it. No 20 minute intro with lots of blah-blah-blah. Thank you, sir!

@hobermallow5841 2 года назад

Today I successfully changed the motor/regulator on my wife’s 2012 Forester. Her driver’s side window was stuck and it was driving her crazy. Subaru dealership wanted $600 to do the job. She was very impressed that I did it myself, and I was just rewarded by her in the best kind of way all thanks to this video. Thank you!

@michaelr0x0rs Год назад

I didn't have a wrench on hand and the socket was too wide to get in there while it was stuck in the up position. If you cut the cables though, nothing is holding the window up anymore. Thanks for this video. Helped me out a bunch. Also my 2013 forester plastic crumbled in a few areas heads up.

@mr.indecisive955 Год назад

This was the most helpful video that I could find for 2011 forester front drivers side window motor and regulator assembly part# 751340. My window was stuck up and without the bending of the tabs technique I would have had a longer fight.

@spelunkerd 3 года назад

Smart, efficient diagnostics. I've never removed one of those that was stuck in the up position, not easy.

@bobsoft 3 года назад

Good job. You crack me up with those intros and exits.

@fateh4936 Год назад

Just got done doing this. Everything worked the way you said it would. Thanks a lot brother(y)

@twopoleclip 5 месяцев назад

Thank you for this video I just did a driver side unit and I did it with your help your awesome!

@jamie7624 Год назад

Thanks for this video! Just changed mine out. Very helpful walk through.

@nortonnewmann3711 2 года назад

Just helped my son replace the entire driver door motor/regulator assembly - 2013 Subaru Legacy. Somehow the cable got all buggered up at the point it winds around the plastic motor spool/winder. Following your method here, it wasn't too complicated - we even used the "painter's tape trick" to hold up the window! Got the replacement from O'Reilly Auto Parts... same brand as you got. OUCH!! Quite a bit north of $200!! What sucks is he had it "repaired" under extended warranty last year. There was NO repair... looks like they took it apart and didn't even bother to properly reinstall the plastic vapor barrier... which could have been why the cable was boogered up. It was sticking to the window inside the door. I taped it back into place with black Gorilla tape. If you want something done CORRECTLY... do it yourself! THANKS for the informative video... really helped us!

@RustBeltAuto 2 года назад

Welcome.

@hobermallow5841 2 года назад

Great video. Fantastic ending. Included all that you need to know and see and no fluff.

@Nyck461 2 месяца назад

Mine problem is in the driver side. Also the window is stuck in closed position. According to what I saw, I will need also to remove the window in order to replace the mechanism.

@donaldpainter628 3 года назад

I've got a couple of small suction dent pullers I put them on the window and they hold it up and won't let go until you release them I think I picked them up at Wal-Mart for 6 bucks

@RustBeltAuto 3 года назад

Good idea. I've heard of that before. Getting one is in the back of my mind somewhere.

@scottriggs4950 3 года назад

Thanks for the video

@MrBeeradb1 3 года назад

Good fix.

@stephaniebourque6877 2 года назад

For a second there I thought I could do this by myself to all 4 of my doors😵‍💫 but now I’m just wondering how much it’ll cost to get a professional to do it hahaha

@RustBeltAuto 2 года назад

What makes you believe you need all 4 window regulators?

@stephaniebourque6877 2 года назад

@@RustBeltAuto well I’m not sure exactly what it is. The driver side window is wiggly and stutters when I lower and raise it. The same thing is slowly happening to the other 3 windows on the other 3 doors.

@RustBeltAuto 2 года назад

@@stephaniebourque6877 you must use the windows a lot.

@stephaniebourque6877 2 года назад

Hahaha I bought the car a year ago off someone who had kids…I think that has a lot to do with it