2009-2018 5.7L Dodge Ram water pump replacement

Подписаться 50 тыс.

Просмотров 54 тыс.

50% 1

How to remove and replace a leaking water pump, thermostat, and cutch fan on a Hemi Dodge Ram. This is also the same water pump for 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009, Chrysler, Dodge, Ram, Aspen Durango Ram 1500 2500 3500, GAS, Sport Utility Crew Cab Pickup Standard Cab Pickup, Extended Cab Pickup Extended Crew Cab Pickup Cab & Chassis, 8Cyl, 5.7, Limited, V8
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
08 09 10 11 12 13 14 15 16 17 18

Авто/Мото

Опубликовано:

16 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@MrElrond330 4 месяца назад

Bruh! 😅.. So good! I have a 2011 Power Wagon with a 5.7 I gotta do the water pump on! I wasn't looking forward to it AT ALL, until I watched this! The step by step was great! Great camera shots and the hilarity was fantastic! Much thanks!

@aarony8534 Месяц назад

This video helped a ton! Got it done on a 2013 Ram 1500. One note, I almost made a bad mistake! The bracket that needs to be removed has a nut on the outside, THEN after removing the bracket there is another nut to remove the bolt. I didn’t realize this and began prying on the pump and probably almost snapped it.

@jpelonrun6692 2 месяца назад

I just completed my water pump install and have to say this was the best video I came across on RU-vid.Thank you, thank you!

@egmac100 9 месяцев назад

Child proof connector...LMFAO!!!!

@danielbanton5351 2 месяца назад

I’m not a mechanic at all. The one hidden bolt got me. I would have just gave up but when you said just count to 12 gave me just what I needed. Thanks great video.

@aarony8534 Месяц назад

I almost made a mistake bc I didn’t realize there was another nut behind the bracket nut holding the bolt in. Starting keying hard on the pump, lucky it didn’t snap.

@joedominick7517 8 месяцев назад

I appreciate your attention to details in your videos. Great Job!

@RustBeltAuto 8 месяцев назад

Thank you.

@craigheislen3304 4 месяца назад

I love the realistic commentary! 😂

@thomasgolub4270 2 месяца назад

Great video!!! You can also take the fan shroud off with the electric fan at the same time. Before taking the fan clutch off. That way you’re not at risk of breaking the fan shroud

@dalepogue5799 2 месяца назад

Thanks for the old man conversion table. Just started working on this new stuff. I need to get more metric tools

@obliterator74 Месяц назад

I really appreciate you making this video. It helped a ton!

@Burgher1605 6 месяцев назад

I’ll be tackling this this weekend I think. Pump’s been leaking for a while and it’s just getting worse. Time to stop procrastinating and get r done I guess haha.

@paulnunez9975 2 месяца назад

Thank you for a very good and straightforward video

@jasonaxtell2617 12 часов назад

Thank you for this video. This helped me decide to do the job myself.

@adamschwarz1388 7 месяцев назад

Oh man haven’t watched one of your videos in a while. Great mechanic. Your biggest fan from Canada. You may not remember but I pride myself in making you laugh in some of your live videos.

@RustBeltAuto 7 месяцев назад

Good on you. I stopped doing live videos, because people.

@whiskeyactual. 2 месяца назад

Entertaining vid. Just order my pump and thermostat and looking forward to the repair.

@misterletters7406 8 месяцев назад

fantastic video.. it's exactly what I was needing.

@edensadventures7363 День назад

Perfect video! Followed along on my 2015 Ram.

@Dekota_Oechsle 4 месяца назад

Thanks for the vid. I get to do this job on mine now.

@AsphaltHunters Месяц назад

Thank you so much! This Video made it easy.

@PaulieWalnutss 9 месяцев назад

Thanks for all your vids! Love the quality work and commentary! Keep up the great work I learn something from every video.

@salmedina8216 Месяц назад

Needed this video..changing mine this week..will let you know how it went

@alexthemechanic8110 9 месяцев назад

I love your videos! You are too funny!

@RustBeltAuto 9 месяцев назад

Thanks! I hope it does something for someone.

@NoWr2Run 9 месяцев назад

@@RustBeltAuto YES IT DOES, SIR, YES IT DOES.

@fredhickmaniii1083 2 месяца назад

What an outstanding video. In fact, it is stellar !!!! I have GOT THIS !

@BarnStangz 9 месяцев назад

That was a VERY amazing adventure! I finally did the wheel bearings in my '97 Maxima.... That was fun.... 😒 Too bad you aren't closer to me, we could go on a fun adventure together called replacing the valve cover gaskets next! OKAY BYE!

@RustBeltAuto 9 месяцев назад

I have a tool for that.

@dkenneth5651 4 месяца назад

Thank you! This was incredibly helpful, and good for a few laughs. My favorite is "guess where from...". I'm jealous of how easy it was for you to loosen the fan clutch nut. After way-too-much trial and error, I ended up using a torch and an air hammer to free the *$&%&@ thing up.

@stevedaugherty9868 Месяц назад

😂

@brendanmcculley8575 2 месяца назад

Soild video dude love the Canadian accent

@venomrogue1 5 месяцев назад

I would have done the v6 fan mod while you had it apart. It helps with water pump longevity too.

@Ricky-eo5ym 4 месяца назад

Great video

@sajen23 5 месяцев назад

great video

@JeremyBrown-js4mc 4 месяца назад

Excellent video. Only issue I had was with the FAN REMOVAL. I ended up using a visegrip on the edges of the pully and an adjustable 1-1/2 wrench. I didn't need a hammer. And used this method to snug it up too.

@aarony8534 2 месяца назад

After battling other methods for an hour, the vise grips hack save me! Took 1 minute

@shatshatington Месяц назад

Ya this worked for me too. Thanks

@stevedaugherty9868 Месяц назад

I finally read the comments after 3hrs ,small c clamp vice grip 5 minutes fan removed. 😢 damn

@aarony8534 Месяц назад

Same! Vice grips, long adjustable wrench with a pipe over it for extension.

@shatshatington Месяц назад

@@aarony8534 exactly what I did

@michaelward9306 4 дня назад

The commentary is excellent lol

@dustingesin6338 19 дней назад

He kind of talks like Jesse Ventura. It’s pretty quite hilarious. A good video.

@michaelsummers6162 6 месяцев назад

Good vid

@1686mets 5 месяцев назад

Dude sounds like the old school wrestler Jesse “the body” Ventura.

@RustBeltAuto 5 месяцев назад

My Governor.

@aarony8534 2 месяца назад

My system just started leaking coolant on 2013 Ram 5.7. I was told there had been stop leak used previously when I wanted the system flushed. Lots of fluid near water pump area. Deciding whether to tackle it myself. Replace hoses while I’m at it?

@RustBeltAuto 2 месяца назад

I don't replace hoses, unless they are bulging, or squishy from contaminents, or feel them cracking when I squeeze them..

@aarony8534 2 месяца назад

@@RustBeltAuto thanks. Just decided to go ahead and swap them out while I’m at it. Going to use a flush several times before changing out to try and get the built up gunk out of there.

@TJ-zi5li 3 месяца назад

2010 ram 5.7 110,000 miles. I have a “knock” from front of engine that sounds like lifters(or bag of marbles). The knock gets louder as my engine warms. After removing my serpentine belt and starting engine the knock disappears. My water pump pulley has a slight bit of play but its not leaking or overheating. Do u know the best way I could eliminate all the other pulleys to be 100% certain it’s my water pump making the noise? I just want to make sure I get rid of the noise without throwing parts at it. Thank you for the excellent video.

@RustBeltAuto 3 месяца назад

Get a wood dowel, touch it on your moving parts, and put the other end against your ear like a stethoscope. You should hear it.

@TJ-zi5li 3 месяца назад

Thank you sir, for sharing your knowledge. Appreciate ya!

@breezy2092 4 месяца назад

My dad truck isn't leaking UT everything is loose and has play. Is it the water pump? He plans on replacing the clutch fan as well

@RustBeltAuto 4 месяца назад

I don't believe it would be, unless it is really low on coolant.

@troysutton8784 2 месяца назад

Hey I have a question. Do any of the bolts require sealant?

@RustBeltAuto 2 месяца назад

My sources say no.

@itsme4611 2 дня назад

I like your funny words magic man

@davebuchanan9761 9 месяцев назад

are you able to put that beast on the lift or does it weight to much?

@RustBeltAuto 9 месяцев назад

I can.

@davebuchanan9761 9 месяцев назад

thanks!!!

@stevedaugherty9868 Месяц назад

Read the comments on fan removal

@Hunter-Danzi 4 месяца назад

At 6:34 the black pipe that leads off of the pump itself, does anyone know if that by itself can be purchased? That’s what is leaking on mine with a pinhole type of hole.

@RustBeltAuto 4 месяца назад

Maybe call the dealer. Probably cost as much at a parts store to buy the whole pump. I don't think a regular parts store will carry that by its self. I could be wrong though.

@dirk3182 2 месяца назад

Dorman 626-603 HVAC Heater Hose Assembly Compatible with Select Chrysler / Dodge / Ram Models

@TheNotYetProSkaters 3 месяца назад

What’s the book labor time on this job ?

@RustBeltAuto 3 месяца назад

I don't know.

@user-vv1qr1wg3d 20 дней назад

This guy is too funny

@theregotk 2 месяца назад

how long is your wrench

@RustBeltAuto 2 месяца назад

That's a strange question.

@jasonvillarreal9090 7 месяцев назад

Mine just went out, had to pay $440 parts and labor. I think I got a good deal this seems like a good amount of labor

@leondante19 6 месяцев назад

Should let your husband do it then

@silverload3622 27 дней назад

When replacing the A/F make sure you buy OAT organic acid technology and the 2022 and up has switched to hoat hybrid organic about tech and don’t mix with regular af cause it turns into a gel and clogs the radiator

@RustBeltAuto 26 дней назад

Agreed. I do not put conventional coolant in anything. It is pretty much obsolete. Mixing OAT with HOAT is a goofy subject, and currently don't know what to believe, because people don't know what they are doing. Some say they can be mixed, and some say no.