2010 - 2014 Subaru Legacy & Outback Mode Door Actuator Replacement: Easy DIY? You Tell Me!

Подписаться 381 тыс.

Просмотров 43 тыс.

50% 1

Please Like, Comment, and Share. Be sure to subscribe for future videos. Don't forget to hit the bell icon for notifications. RU-vid has changed what they show subscribers!
Subaru Specialty Tools - www.amazon.com/shop/mrsubaru1...
Subaru Head Gasket Essentials - www.amazon.com/shop/mrsubaru1...
Subaru Timing Belt Essentials - www.amazon.com/shop/mrsubaru1...
StoreFront - www.amazon.com/shop/mrsubaru1387
If you like the vids and want to help make more: paypal.me/MrSubaru1387
----I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself.----

Авто/Мото

Опубликовано:

20 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@alspilowey Год назад

You've convinced me that the problem isn't that bad and I'll leave it alone. Can't imagine what a dealer would want for this.

@Thisoldhiker Год назад

Sometimes, that's the right answer.

@ttamn92 Год назад

If I remember correctly I believe the book time for this job that calls for the whole dash removal was around 9 hours plus another.5 for the actual mode door actuator replacement so not a cheap job but most of the ones I was doing were warranty jobs so roughly half of that time IF you documented everything correctly so you can get paid the proper time.... Lol dealership life was definitely a love and hate type thing lol

@yal100 Год назад

Insane, just a little engineering, redesign and relocation and this thing would instead be a 1 hour job. Access door behind the cluster or radio for example.

@carll91 Год назад

what does that actuator control?

@Mr_BUSINESS_24_7 Год назад

@@carll91Vent selection (defrost, vents, floor)

@arlo0011 Год назад

That was an un-be-leeeeevable amount of work just to replace that piece. Well done! You are a very patient and talented man.

@ferddesir6066 2 месяца назад

Wow. This is one of the best DIY r/r videos ever. Anybody object to me giving MrSubaru1387 the youtube users' automotive DIY video of the year award? Comment with Yes - award or yes - award with high honors. 😅

@Shade_Tree_Mechanic Год назад

"Subaru really stepping it up with the Ziploc bags" 😂

@GrumpyF0X Год назад

Subaru: "We made it easy to get to our parts by incorporating ziplock bags. You no longer need to struggle and rip open single use plastic bags." Customer: "Okay, but can you make the parts IN THE CAR easy to get to, so we don't have to struggle to get to those?" Subaru: "🤣 No!"

@ryanfahey640 2 месяца назад

No joke. I think i used about 30 bags for this over the weekend.

@cucumberpat Год назад

I'm so grateful that you do videos on this gen of Outback, they're so hard to find!

@wim0104 Год назад

I subbed because of this 👍

@MikeDS49 Год назад

It's a great candidate for all "while you're in there" maintenance.

@bullnukeoldman3794 Год назад

That actuator is sketchy in both of my Gen 4 Outbacks (a 2010 and a 2011). I have been living with the noise and hunting of the actuators for a few years and was about to finally replace them this summer. After seeing this video (well done, by the way, great presentation) I believe that I will continue putting off replacement of the actuators a bit longer... I need to align my Karma a bit and become more at peace with the world before doing this...twice, in my case. LOLOLOL! Great video, keep 'em coming, my friend.

@GrumpyF0X Год назад

Amen! 😂

@watchingdanny Год назад

Outstanding video for that actuator, radio replacement, tweeters, shift knob removal... everything. Great job as always and thank you for filming it.

@volks-jager Год назад

i did one of the recently and kind of cheated, i removed the just the motor and left the white cam and black backing plate in place and just changed the motor. i was able to do it from under the dash without removing very much. i know it isnt technically the right way to do it, but worked and was way quicker. the car was a roach and customer didnt want to pay to remove the dash.

@gilbryans Год назад

Thank you for reinforcing my decision to NOT replace the Actuator in my 2014 Legacy. Well done!

@player18792 7 месяцев назад

My actuator blew out maybe 40k miles ago and has been stuck on one vent mode ever since… this video convinced me that I can live with having cold feet in the winter. I’ve pulled dashes before. Not worth the pain to stop the cold feet in the winter😂

@ChrisSchwamb Год назад

Holy crap! I had the dealer replace the Takata airbag in my 2014 Outback Premium after I got the recall notice.This video just made it abundantly clear why I ended up driving their loaner car for an extra day. And, I'm sure that job was easier than this one.

@thegatekeeper715 Год назад

That is an insane amount of parts removal and work just to get at the actuator.

@guyliu9396 3 месяца назад

That was their purpose of designing , getting your money into their pockets.😊

@jasonschembriify Год назад

If there's anyone I'd trust to work on my car, it'd have to be Mr Subaru!

@aphex28 Год назад

Just did this on my 2010 legacy gt. Wasn't fun but now I don't hear a robot behind my dash that I've been listening to for the past 3 years. what a RELIEF! Also not sure if this technique works on radio bezels that haven't been off before. But the super easy way I take it off is open that pocket above the HVAC controls, shove my hand in in the pocket, make a fist and pull. Comes out every time no problem

@willloy8901 9 месяцев назад

Oh my goodness😮. What a wonderful grasp of fortitude and patience! You are the example of excellence for every mechanic. Job well done and meticulously documented. Thank you

@spencermain6686 Год назад

I was able to replace the mode actuator in my 2011 Outback without pulling the dash or instrument cluster, although I kinda wish I pulled the instrument cluster now to see it from the top. I have long skinny arms and just reached up from under the dash. I used a combination of different screw drivers including a right angle ratcheting one. Not an easy task and I definitely cut up my arms doing it. My actuator couldn't find the floor and dash vent position, but all the other positions worked. It would twitch back and forth trying to find the position. I just cleaned the contacts and reinstalled it and it worked again. The contact for that position got grease and dirt on it. I was trying to avoid replacing it shortly before selling the car. I miss how easy the dash side covers came off on that Outback compared to current my Crosstrek. But I appreciate the longer strap/on the a-pillar trim. The windshield guy cut one of the a-pillar clips on my Outback to get to the wiper deicer plug 😡. I'm glad I discovered it and replaced the clip because the airbag would make that trim a projectile without it.

@MonkeyPunchZPoker Год назад

I understand now why there were no previous RU-vid videos showing the 2010-14 Legacy Mode Door Actuator Replacement.

@nowiecoche Год назад

That’s a big oof. Huge thanks to MrSubaru’s time and service, and to the owner’s investment.

@nancyoffenhiser4916 Год назад

My God what a job! I really wish it had just been the squeaky sunglass holder in the headliner.. How in the hell did you keep track of all those screws and clips? You're amazing!

@barrythomas6429 Год назад

It amazes me that all this stuff had to originally be designed and manufactured to fit around all of the other stuff under the dash.

@jeffrey3498 11 месяцев назад

I'm happy to know mechanics as yourself exist. Great work! 😎👍

@pauljennings4248 Год назад

Admire your work and patience. Thanks for sharing this very involved repair.

@maslosky Год назад

YES! I requested this video a while back in the comments but seems my prayers have finally been answered! Thanks Mr. Subaru!

@GothicDragonX Год назад

These types of videos are so damn inspiring. Thank you so much. I need a spare vehicle, a backyard, and much free time to work on my pet project vehicles. If I had that above requirement, I would use these videos as a guide. Looks easy enough. I have slightly modified my 2013 Subaru Legacy, but I have yet to do something in-depth as this.

@johnroederer6410 11 месяцев назад

Just an incredible video! Hard to believe that you were able to keep track of everything. You're one in a million and did a super job of video work plus explanation to the smallest detail. If this video were graded it would be off the charts PhD +++

@rwbishop Год назад

With a passion I _hate_ dash work... so glad I no longer have to piddle with them. You gave me a backache just watching - had to go lay down and everything. :) Cool videos, and oh, once more thanks for the 'MrSubaru10' Koken discount code; it again saved me some substantial cash! :)

@enigmatic969 Год назад

I am in awe of your skill. Having owned 3 Subarus in my life and definitely having felt the pain of some of the repairs and questionable accessibility of places where Subaru engineers bury the parts inside the vehicle I can honestly say I would rather replace spark plugs on H6 engines from early 2000s and remove and replace Subaru suspension components in Rust Belt again than attempt to replace that actuator motor. For some of you that do not understand what I'm on about; replacing spark plugs on an H6 Subaru engine of early 2000s with motor still in the car is beyond very difficult on your best day and getting rusty salt fused suspension components off the early 2000s Subarus is almost impossible without breaking yourself, tools and other things and I would rather do that than do what Mr. Subaru just did with the actuator motor.

@gregwillett2363 7 месяцев назад

Thanks for taking the time to make this video. You did a great job! This video will really help me a lot since I have to replace my heater core in my 2014 Outback.

@everythingpnw 3 месяца назад

I did this on my 2014 Subaru Outback all thanks to your video 😂. Yeah it was as much a pain in the ass as you all think it is

@kevinunknown1747 Год назад

Thanks for this video. I dont have this problem yet, but you did an amazing job and a great service fir everone who love subarus

@jamesbruno5896 Год назад

Great detailed video! Thanks for posting!

@jamesnjoni 2 месяца назад

Thanks for a great video, just replaced the actuator in my 2011 Outback 3.6r, figured I'd tackle this since i was upgrading the stock stereo at the same time.

@iaroslavgrygorash5443 10 месяцев назад

That is an incredible amount of work, thank for sharing man!

@ryanfahey640 3 месяца назад

Thanks for this video! I have to replace my leaking evaporator which requires all this, plus draining coolant and removing the entire HVAC housing. Now I know to get some really long pliers for that a pillar clip. discovering that in the middle of this job would have been a very unpleasant surprise! I am definitely replacing that actuator while I'm in there.

@RJmem0 2 месяца назад

Hello what fails it is, I still want to replace the evaporator of the A.C. cools and warms, the problem is that behind the tachometer when I turn it off makes me a noise like water…

@ryanfahey640 2 месяца назад

@@RJmem0 if you hear water noise that sounds like air in the cooling system. You need to purge it and make sure your coolant is topped off.

@haywardkong1213 Год назад

You are my hero man :) I'll probably do it to my 2014 Outback either end of this summer or next... It does the annoying click sometimes... but still works... I've been looking for a video for a long time.....

@kidwelldavid6136 Год назад

I don’t have the patience for a job like that. Hat off to you for that job. I’m guessing that took you about 5 to 6 hours to do. Well done to you on that job. 👍

@MrSubaru1387 Год назад

About 3 hours or so with filming and my Snap-on dealer dropping in. Otherwise probably about a 2hr job to pull, replace, install.

@kidwelldavid6136 Год назад

That’s why I would come to you for the work to be done. Again thanks for what you do.

@gonpostal1971 Год назад

Wow, that is RIDICULOUS! I will live with my noisy actuator... But if they're willing to pay for the work...And the video quality was just fine, especially with how much extra that added to your job.

@HouseCallAutoRepair Год назад

I filmed a steering rack replacement on the side of the road, for one of these, due to the lack of content on this gen Subaru... It's amazing there's so little on these.

@AlejandroReyesG 2 месяца назад

Outstanding job, Mr. Subaru1387. And the Oscar goes to.. Mr Subaru1387

@ejmagras Год назад

hats off to you.

@EdwardSimanowski 9 месяцев назад

Thanks. Can hardly wait to tackle mine next week. 😅

@sgtzsquad Год назад

Wow, nice job. We had a 2011 Outback and I wanted to meet the engineers who designed the headlight assembly replacing the low beam lamp through the wheel wells. 🤔🤔

@wim0104 Год назад

Easiest way is to just drop the fender liner straight down, then engage veterinarian calf-birthing mode.

@geraldrivard5767 11 месяцев назад

Yup they took a dum ass pill that day, what a pain ,thank god we can dislocate are joints

@hofnerbass Год назад

You are a genius. It scares me just to watch this.

@mickeybrumfield764 Год назад

That's taking apart a significant percentage of the vehicle to replace a mode door actuator. Subaru seems to know what they're doing with the use zip-lock bags.

@seanhoward8025 Год назад

Robert…don’t know how my indy shop did it, but they replaced mine with just the lower and center stack cover and the IP removed, which I already had removed. 1 1/2 hours labor; like $235 with parts. I looked at doing it myself, but when they quoted me that price, I said “Go for it!!!” 😀

@MrSubaru1387 Год назад

This was $320. Parts and labor, including the PCV components and install.

@seanhoward8025 Год назад

@@MrSubaru1387 How many hours? Obviously, your labor rate is very reasonable!

@MrSubaru1387 Год назад

@@seanhoward8025 I charged 2hrs labor + parts.

@javiergallardo3808 10 месяцев назад

Thabk you very very much for the awesome video and the very detailed procedures in all your videos. Mine failed 2011 outback and i would have left it as it was but in chicago i need to defrost the windshield in winter and unfortunately the actuator got stuck haleay in between vent and floor settings. Thanks to your video i completed the job in 35 mins Thabk you

@michaelweatherhead9470 Год назад

Thanks Robert great information great video. Take care of yourself and Girlfriend and family and be Blessed ❤️❤️👍.

@ryanfahey640 2 месяца назад

Just went through this. The last 2 little wiring clips at the corners of the dash are a beast. The screw faces the windshield and you can't pull the dash out very far without removing them. You need a little stuby philips screwdriver, like 2" or less, then use it backwards. Lucky I had one like that. The clips behind the pillars were a pain, but not as bad as I thought with a 16" plier set. The connector for the airbag confused me. There is a green "button" you push to release the lock. However you need to push it much harder than it seems. It stops like you've pressed it all the way but it requires much more force to fully release it. Only realized this after using pliers on it and it finally released. I have to go further than this and remove the entire crash bar and hvac box to get to the evaporator. Wish there was a video for that!

@cigarsgunsandgasoline8032 Год назад

I was lucky when I owned my Impala... BDA's were $40-80 depending on brand, and all 6 were easy to get to!

@cheehochiu5120 Год назад

Great job! A lot of hard work. Def earned a “Like and subscribe”. I think I have to change my driver side actuator as it’s blowing out hot air and the passenger side is blowing cold. I have a 2017 forester. Should have tackled it during the spring when it wasn’t so hot outside. Great video and great details. Many thanks.

@Sigue24 Год назад

Mannnn, and I'm putting off changing my blend actuator on my 2013 STI. Yeah I'm just going to be blessed and go ahead and knock that out.

@alanmohn4146 Год назад

That job is almost as bad as replacing a heater core on a 1980's Ford Taurus. With the way Subaru does their dash it looks like you will have less squeaks that the Ford after you're done. Nice job with the explanation.

@ZzWeAreVenomzZ Год назад

This whole dash disassemble is crazy to see I just did this to my 14 legacy to paint my trims and other parts.. it’s an Audio vehicle

@PRO4XKEV Год назад

This is a job where 'patience is a virtue'

@michaelbutler9528 Год назад

We have a 2013 Legacy. I will drive to SC and see you if this ever needs to be done!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@prestonchucktaylors 5 месяцев назад

Easiest way to remove radio trim is to open the little cubbies door and pull on the door itself. Works like a charm

@eightnoneone 2 месяца назад

Right idea, but to avoid damaging the door, you can put your hand in the cubby and make a fist and it's enough grip to remove the panel.

@wim0104 Год назад

finally, thank you!

@wim0104 Год назад

what a massive design fail from the engineers; this is a big chunk of assembly line work...

@chcrecruiterwest Год назад

Great work. In case others are wonderful, mid-2000s Silverados have the same issue- remove the dashboard to get to all the mode doors.

@johnp8150 Год назад

Really useful video, thanks v much.

@1717jbs Год назад

Great vid. Thanks.

@moomae1 16 дней назад

Hugely helpful!

@timbrown9731 Год назад

Thanks Robert this is a great video for our fifth GEN Subaru legacy page on Facebook we usually get a ton of questions how to pull the dash apart the right way and there really isn’t anything on RU-vid!

@MUSTANG5O Год назад

WTH , hope my never goes bad while I owe it lol😂. You have a lot of patience.

@tikofthetoka5650 Год назад

From what I hear, this is the norm in GMC Cheby products

@MrAdriansoto21 10 месяцев назад

This is about a $1200 cost for it to be done at a Subaru service center. I checked in Southern California where I live. Service costs $823 Part: $100 Trouble shooting: $211 They will not replace the part without doing an inspection to see what the issue what the AC is. Even if you’re 100% certain it’s the blend door actuator, they won’t repair your vehicle without troubleshooting.

@mde8965 Год назад

MrSubaru great job! I envy you that a job like this would take about 2 hours. For somebody like me, it would be...take off one part, spend 30 minutes researching why the next part won't come out...find it, take that apart, repeat, repeat, repeat. Then put the dash back together only to realize I forgot to plug in two things, so take the dash back out, plug them in, put the dash back in...20 hours later, 4 band-aids, one order for a couple parts I ended up breaking, and a mega-ton of aggravation, and it would get done. But, the next time, it would only take....10 hours?

@MarcelloTheBandit Год назад

Oh no!!! That's got Cadillac DTS/Buick Lucerne vibes ALL over that!

@ttamn92 Год назад

I was thinking that you could pull the cluster and radio and get to both sides of the actuator but maybe I'm thinking of an older model but I remember replacing them that way when the manual called for the whole dash r&r .. made for a decent flat rate job and helped make up for all the rusty and seized suspension parts making a 2 hour wheel bearing job into a six hour clusterfuck lol. Or maybe that was on a Forester? Idk but I definitely remember replacing them that way....

@MrSubaru1387 Год назад

Older model 05-09 you just had to drop the glovebox and go in through the side.

@tikofthetoka5650 Год назад

Think I'd try to rig a manual backup cable for the next time

@blueheelerfriend8450 Год назад

Dang man!! 😯 👍👍👍👍👍

@ashantha123 11 месяцев назад

Thank you bro❤

@sirfinthetube 11 месяцев назад

Thanks!

@MrSubaru1387 5 месяцев назад

Thank You!

@lilflip1820 Год назад

What a nightmare. I just did the mix door in my wife's Pathfinder and thankfully I didn't have to pull the dash or I would have had to pay $$$$ for it.

@jonk6137 Год назад

I did mine too

@stimsonj06 6 месяцев назад

Its actually very simple to do this job without removing the entire dash, on the bottom of the steering colume there is a module that unplugs and unbolts to give you a bunch of room to access all 3 screws, stubby screwdriver and a couple of awkward positions and its loose, I did remove the instrument cluster to gain access to the electrical connector and it helped when lining up the vents control lever up top. Took about 90 min for my first time.

@voltzelectrical7436 6 месяцев назад

i need that video

@Laoutback 3 месяца назад

Please upload a video 🙏🏻

@stimsonj06 3 месяца назад

Sorry guys I don't make videos, as far as removing the cluster it is the same as this video, there's a large module directly under the steering column that unplugs and removes with a couple of bolts and that's where you gain all of your access to reach up from the bottom to get to the screws.

@timbrown9731 Год назад

Lol how funny I have the same blue barf bag in my glove box!

@mendodsoregonbackroads6632 Год назад

Like rwbishop I also HATE removing a dash. I find it almost enraging when I really start thinking about it too much. That setup needs to be designed and built differently to be able to access everything behind the dash. That being said this Subaru dash is much better designed than the last dash I did which was a GM product. In any case, cool video.

@guyliu9396 3 месяца назад

Subaru purposely designed to rip owners off.

@leokhalaf5307 7 месяцев назад

Great Video. I am in the middle of trying to do this repair myself. One issue I was hoping for clarification on is which plastic pins go in which grooves. I am currently stuck trying to line up the pins with the grooves. Please help

@leokhalaf5307 7 месяцев назад

All right I finally figured out which pegs go into which channels. I made a video showing you which ones go where and it also includes a few other tips that made the job easier for me. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JZEdc7WUCTE.htmlsi=o4RRQfd4ftyFFf_b

@StealthParrot Год назад

I can easily do this up to and including the PCV valve replacement. After that .. umm, I'll leave to the pros like yourself thank you very much 🙂

@johnnywilliams7397 Год назад

Thoughts on an oil catch can on the new 2.4 turbo. I have searched the u tubes cannot find much on them Subaru specific. Thanks.

@dorianleclair7390 Год назад

If they made this plastic out of glass reinforced polymer would last forever. Same stuff glock uses in its hand guns.

@shauntrafter4957 5 месяцев назад

Can you do a video on replacing the actuator through the instrument cluster? Some threads I've read talk about it, but I'm a visual learner.

@tikofthetoka5650 Год назад

All done. Now were do these 5 screws go?

@vonzellable Год назад

Perfect I have a 2013 manual and I hope I don't have to do this. I am already having enough trouble figuring out how to remove my engine/transmission/both to fix my clutch. This engine is mounted differently than all the vids I've found. :)

@fcporto0629 Год назад

It’s easy, just depends on your tools to determine which method to use

@frafraplanner9277 Год назад

My guess is it's because the 4th gen Outbacks had EJ series engines from 2010-2012, but in 2013 switched to the FB series

@ThePhotographyHobbyist Год назад

That's an expensive replacement. Labor intensive. My dad was a mechanic all his life (specialized in Porsche and Audi mostly), but anyway...watching videos like this remind me of why I'm glad I never followed his career path. I think I'd be crying AND cursing doing something like this dash removal just to replace that one part. 😅

@Gabefc3s Год назад

awesome work! any link for the eastman tool you used on the windshield/tweeters?

@thomasbrown9402 Год назад

what a royal PITA

@bigrichbx 10 месяцев назад

Nice video. I replaced my evaporator on my 2010 outback last year on my own. Tons of work. One question. What is the brand of the electric screwdriver you’re using? Looks nice.

@GHW Год назад

I noticed the actuator you took off had some kind of lubricant in the grooves. Do you recommend us putting some lubricant in the new one before putting it in?

@MrSubaru1387 Год назад

It’s white lithium grease. Doesn’t hurt to swear a little on the pegs to keeps them from binding.

@melissavines4153 Год назад

O.M.G😮

@wim0104 Год назад

anything else we can check or service with that dash out of the way?

@cajunaggie9815 Год назад

Excellent tutorial. Seemed like you had half of your plier drawer out at one point :) I have to really be in the right frame of mind to nearly disassemble an entire dash to fix an annoyance. And I always keep my fingers crossed that nothing rattles afterwards. Sounds like the customer is willing to do what it takes to keep their old Subaru alive. Going to flush out that old nasty brake fluid next?

@MrSubaru1387 Год назад

CVT and brakes coming at a later service appointment.

@matthewchild7927 Год назад

I just did the same job on my 05 liberty. Nothing is as daunting as it first seems.

@rayrowe2664 Год назад

please tell me where you got that set of flex head ratcheting box wrenches you attach to a 3/8 drive extension,,i saw your short video on here

@phild2434 Год назад

Thanks for posting this job! Curious, how long did this take in real time?

@MrSubaru1387 Год назад

It would normally take about 2hrs. This took quite a bit longer because of filming, and my Snap-on dealer dropping by midway through. Lol

@bugattidatrucker668 Год назад

Question 2010 Legacy codes P0457 P0442, Changed gas cap. codes are Still coming up. Anything you recommend?

@sassiharel4879 11 месяцев назад

this was great,thanks.i have a 2010 3.6 with dual control with the same problem with additional twist...it is blowing cold on the passenger side but not on the driver.will the same actuator replacement take care of that problem as well or do i need to replace another one as well?thanks e have a great day.

@cheboludo90 7 месяцев назад

hi...did you mange to fix the issue between the driver & passenger side?...I am having the same issue

@patrickmercado5284 Год назад

God please protect and watch over my blend doors !

@CajunShrek Год назад

I know your a busy bloke mate but I need info if you can help. I have 09 subi Forester with ej25. 3 sohc . It took a dump so I'm in search of a motor. Online says I can only pull from 09-10 which I think is a lie but I don't speak subi lol. Can I use a dohc in place or grab a dohc and swap heads? If so from which era? What's bad this car I just reworked the heads few months ago with new MLS gaskets and stronger valves with new guides