2010-2015 Lexus RX350 RX450h Center Heater A/C Vent Register Replacement Instructions

Подписаться 9 тыс.

Просмотров 4,1 тыс.

50% 1

Master Technician Viktor G shows the DIY how-to removal and installation procedure.
Please help support my channel by making any purchase using the following affiliate links for which I may receive a small commission, or use the Super Thanks button to donate to the channel directly.
Automotive trim and clip removal kit: amzn.to/3KgKGfg
Small flat blade screwdriver set: amzn.to/44HUoQi
1/4" DeWALT impact driver kit: amzn.to/472jE57
DeWALT socket adapter set: amzn.to/44XTTkI
10 mm magnetic socket: amzn.to/41fcsjA
Rechargeable LED mini work light: amzn.to/3Y74OpY
Thank you very much, I really appreciate it!
Huge thanks to Jim Ollick for editing this video!

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@sasukeushiha2415 18 дней назад

Hey victor Thanks for always helping, my 2018 rx is not blowing air for only one front vent how can I fix that or what control the ac air different directions?! 🙏🙏

@Viktor_G_Automotive 18 дней назад

@@sasukeushiha2415 there are several servo motors that move blend doors on the HVAC box that control the air flow. Unfortunately, I don’t have a video on replacement of those at this time.

@sasukeushiha2415 18 дней назад

@@Viktor_G_Automotive thanks you so much at this point I’m probably just gonna live it open … if I find it 😅😅

@Scottvidas 3 месяца назад

Is the driver side heat blend door actuator accessible this way or do panels by the accelerator pedal need to be removed?

@Viktor_G_Automotive 3 месяца назад

You do not need to remove the center vents, that won't help you. It is located by the driver's right knee area sort of behind where the stereo is bolted to the side of the HVAC box. It can be challenging to remove and replace the blend door actuator, depending on your skill level. The repair manual advises to remove the complete dash to do it, but if you are skilled, you may be able to access it without doing that.

@Scottvidas 3 месяца назад

@@Viktor_G_Automotive thank you! I read that a button could be stuck so I wiggled the hot button and got it to go back to 73 degrees. Maybe not the heat blend door if I am lucky. Thanks for such a quick response 😎