2011 Triumph Speed Triple - How to remove and install front wheel 

campbecd: The maintenance schedule for the pink bike is once a year or every 310 miles😂 Thanks! I'm glad you liked the video.

briglnai: Thanks! Nice that you liked the video.

Jeremy Eden: Front wheel axel is Allen key size 17mm and the rear wheel nut is size 46mm.

31acruz: I mount the wheel lifter underneath steering head. Just google "How to use a triple tree stand?" then you will probably find more about how this works. Here is a link: www.motea.com/en/steering-head-stand-motorcycle-constands-classic-5-pin-steering-head-mounting-stand-red-295123-0

@@TheJocke77 Awesome, thanks dude!

Marthin Nielsen: Tack så mycket! Har bara testat Street Triple RS en gång och den är GRYM!!! Ja, sådana däck slits snabbt.

mark hill: I would definitely recommend getting one. I use the triple tree stand and the rear stand when I'm putting it into storage over winter to keep both tyre off the ground.

Mr. Speed thank you for your reply i wasn't sure about them but they seem the best stand to use, thanks once again

mark hill: You're welcome!

Mr. Speed I forgot to ask where do you keep your bike during the winter?

mark hill: I keep it in a car garage.

Jason Foote: Okay, I have not tested a standard front fork lift paddock stand. I only use a triple tree stand to lift up my bike in the front and I'm very pleased with it.

I just purchased a triple tree stand and it worked great. The original front fork lift stand worked on my CBR 500, but it did not have independently tuned front suspension. Thanks for the video, great job.

Jason Foote: Thank You!

Nick D : I found mine in a store that sells accessories for motorcycle and car. Just Google Triple Tree Stand and your city then you will surely find something close to you.

Techno Tard: Sorry but my english is terrible so I don´t want to talk in the video.

David Šekoranja: Sure, here it is: Them two small screws that are mounted in one fork leg 22Nm. Wheel axle 65Nm. The two screws to each brake calliper 55Nm.

What about the 5 bolts that hold the brake disc to the rim ?how much NM ? Got my wheels re-painted. So soon will be reassembling the wheels.

Tyler Felland: Sorry for the late reply. The tightening torque for the front axle is 65Nm.

justice mcdaniel: I used Allen key size 17mm.

thx i was going to ask the same - btw no need to bleed the calipers ?

No. You don't need to bleed them. Just take them off the forks so you can get the wheel out. Tie them up with some string so that you don't put any undue pressure on the brake lines. Remember not to pump the brakes while the wheel is off as you won't be able to get the disks between the brake pads when it comes to putting the wheel back on.

STR Rider: This is what I have mounted or replaced all by myself on my motorcycle so far: Flyscreen, Bellypan, Tail Tidy, Iridium spark plug, Front tire, Rear tire, Rim Stripes, Battery, Exhaust system, Oil and Oil filter and Brake fluid.