2014 Kia Forte 2.0 GDI Low Power, No Codes

Подписаться 422 тыс.

Просмотров 133 тыс.

50% 1

In this video I will walk you through my standard low power condition tests that can be applied to any car.
Scope and Pressure Transducer Testing for a restricted exhaust
• How to test for a plug...
• How to test for a plug...
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Авто/Мото

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 488

@mike-yp1uk 2 года назад

This channel makes me lots of money so I give back by staying active in the premium channel. I've made master l1 tech status and I'm one of the best around. I can go with some of the best. I'm 💯 percent sure it's me duplicating this channel into my everyday work. Scope work is awesome.

@ScannerDanner 2 года назад

Thank you Mike! I know a lot of you guys stick around on premium, even though you've watched all the classes, as a way to continue to support my efforts, and it does not go unnoticed. It is guys like you that help me continue to produce content, even here on YT

@rcrobertson9563 4 года назад

SD I love your channel !!! I'm 66 years old and still work on problem vehicles every day. Thanks to guys like you, Eric, Ivan, and a few others I feel capable and relevant. It is truly possible to teach an old dog new tricks...lol

@JoitaConstantin 4 года назад

I was sure 100% that when you showed the map value when running that you have a plugged exhaust. I think is not possible to see more than atmosferic pressure because when running you the engine is sucking air even if the exhaust is plugged, but even without this reason, all times should be a negative pressure whe engine is running if the exhaust is free. So, you had a very good impresion at first but because you’re not a parts changer you tried also different scenarious and at the end still your first suspicion was the one that won. You are a great technician; keep it going.

@crpth1 4 года назад

SuperMadcox - While watching this video I was shouting vacuum gauge, vacuum gauge... My old school run to tool when codes are blank. In most cars there's no need to remove nothing to connect it. But the usefulness of the tool vs cost/time is quite amazing. In spite nowadays most "mechanics" don't even know what it is. Yeah, I guess I'm getting old. ;-)

@jonmic4232 4 года назад

Another vid for my knowledge arsenal. Just changed jobs from a fleet garage to a used car lot.after 4 years of working on the same trucks and being ,well, bored with the same stuff. Your videos are a big help in refreshing my memory and gaining knowledge. Once again thank you.

@jamesbuttery3862 4 года назад

Another Amazing diag. Danner. I always get nervous on some of your videos if your not sure which direction to go/get confused...im thinking in my head "..oh no, the day the has come! Here's the one that Danner cannot figure out!" Then just in time you figure it out. Once again, your one of the best in the game. Keep on Truckin!

@wyattoneable 4 года назад

Hello Paul. I know this video is from the past but man I hope your feeling good these days. Health is so important. Great video despite your illness. You hung in there like a trooper to give us good information.

@saltiness_incoming1407 4 года назад

Hey I just wanted to shout out and say thank you. I've been a mechanic for a long time and had hard time with diagnostics for PCM it's never been really my speciality thanks to your advice and your ketchup on my rusty skills was able to diagnose my wife's car I had a bad PCM. Just wanted to say thank you for all the advice you put out there and info it really did help in a time of need thanks again

@saltiness_incoming1407 4 года назад

I got the PCM installed today and reprogrammed car runs like a dream....

@andrewk778 4 года назад

I always enjoy following your diagnostic thought process. You are the best. Thank you for sharing.

@MarkBolling 3 года назад

Great Diagnostic Video: I have a 2014 Kia Soul that the power would drop off dramatically on slight inclines. After watching this video I replaced the Catalytic Converter and now it runs like a brand new car. THANKS

@billyyoder8171 4 года назад

Thank you again brother's Paul and Caleb. Good job. Have a blessed and safe week.

@carrillo1998 3 года назад

Part throttle when watching map for a suspected exhaust is what I was taught. May be a bogus test but it has worked for me and verified with a vacc/press gauge or backpressure gauge. Shine light on me if I am completely wrong on that. Great video by the way!

@BigDog50001 4 года назад

I had a car in, low power complaint, MAP too high, thought maybe plugged exhaust. Nope, exhaust was perfect, it was a jumped timing belt. Great video Paul.

@onlyhuman383 4 года назад

Just wanted to say you saved me alot of money I've got a 2016 Kia 2.0 and it falls on its face at 3500 rpm ran a scan on it and it came back as a evap problem . Totally shit scan . My car would use a quart of oil every oil change . I took big cat off and drilled 5 holes in it with a cement bit 1/12 ft long and now car runs like a rocket . Thanks a million for this vid .

@PistonShack 4 года назад

Big Thanks to you Paul and your son for this Video Tutorial. Helped me with my truck diagnosis. Cheers!

@mitchelrowe7363 4 года назад

I'm proud of myself! As soon as you noticed no pwr I thought mice in intake or potato in exhaust!

@chrisgallagher85 2 месяца назад

This man is extremely intelligent. Bravo on this!! Cheers.

@xanderlander8989 4 года назад

It really is all about Fundamentals. Thanks SD

@nemanjadzombic6101 4 года назад

Thank you for another PERFECT video!!!

@kevinshasteen5682 4 года назад

20:42 IDK why but the song "Moon Over Miami" began playing in my head, lol. Good stuff as usual. Leave it to Kia to have a diff spark plug thread pitch. At the beginning where you commented about no trouble codes, I was thinking...Its a Kia, codes or not, its got problems

@victorlewis8970 4 года назад

Thank you for this video, SD.

@CubasAutomotive 4 года назад

I haven't had the pleasure of working on GDI systems yet. Not feeling left out for sure. I think you handled that well Paul. From my understanding, injectors like to leak on these, hence causing the cat to melt. Love to see a follow-up on this.... 👍👍

@ScannerDanner 4 года назад

No follow up unfortunately sis. Cat got replaced under warranty

@everardocamacho5063 4 года назад

Great video Mr scanner,happy new year 2020

@amr-50 4 года назад

Thanks danner very very good video we appreciate your help

@gnolthchgnatch377 4 года назад

I found your video so INTERESTING and gives me knowledge about cars, I want to thank you for uploading nice video keep uploading thank you so much

@ScannerDanner 4 года назад

Thank you, I will

@baxrok2. 4 года назад

Nice job guys. Very helpful info as always!

@Pablo_Automotive 4 года назад

Another grat job team Danner, big hug from Spain

@jimmyrey3045 4 года назад

Thank you for taking the time to share your knowledge with us!

@jerfaulk8 4 года назад

I completely agree with what you said about the customer bringing you the car. I remember when it became an aha moment for me. The customer may have no idea what they are talking about but chances are something is definitely wrong.

@spudbudy 4 года назад

Great video but with all the lastest electronic test tools he still goes old school with a vacuum/pressure gauge LOVE IT!

@tgoodm1 4 года назад

Another 👍🏽 video...Thanks Paul!!!

@tomaspuzonas9616 4 года назад

Perfect, as always 👍🏻

@imgannadie991 2 года назад

Genius! Well done Sir 👏

@raviautoscanning 3 года назад

You make me strong everytime sir...

@airratchetjockey7605 4 года назад

This is an oldie, it’s snowing out

@arbez.nation 4 года назад

Naaaa, That's just summertime in PA. Global warming and all...

@apostolismitsopoulos3593 4 года назад

Your are the best sir!! I'm so grateful for your videos!

@nicknicu1787 4 года назад

Wow,it's snowing in Pittsburg! 😁 I called the cat as well when I've heard that rattling type of sound at WOT. Great diagnosis, more ways to " skin a cat ". Cat! get it...? 👍

@codysautodiagnosticsprogra8706 4 года назад

Caleb’s editing and voiceover about the butt crack killed me LOL. Sometimes you got to take it old school if you don’t have the right equipment Paul. Always nice to see other ways to do things, but definitely would’ve love to see the WPS in cylinder.

@ScannerDanner 4 года назад

Haha he's getting very good at this. Cracked me up too. Thanks Cody!

@mr.nobody4900 4 года назад

I have a co-worker with same problem. I did a little poking on google and found out there is a recalled on Catalytic converter as you said in video. She took it to Kia it was repair at no cost to her. In her case she had O2 Sensor code Bank 1, Sensor 1 and Catalytic Deficiency code. Two Thumbs Up Mr. Danner

@wayneexum2101 Год назад

On point really help me out every time

@dahdah6458 4 года назад

I wish this video released a month early because my girlfriend car had the exact issue. Just as mentioned in the video, it's the catalytic converter that restricted the exhaust flow. The early symptom is losing power when speeding up or going up the hill. The engine would hesitate to rev anywhere above 5000 rpm. For this Kia forte, the OEM catalytic is wielded as part of the exhaust system. We went to a mechanic and had them cut the OEM one out and wielded in the universal catalytic. *** $110 for labor and $150 for a MagnaFlow catalytic. FYI, any Kia with GDI engine seems to have issues with the piston ring that leads to excessive burning oil. The issue becomes more obvious when the engine is above 80,000 miles or closing to the end of warranty. If you suspect that your Kia is burning a lot of oil, have the dealer check it out before the warranty expire. That way you have the record on their database incase the issue become more serious and you want to file a claim for the replacement.

@Brother2Jis_27s4 4 года назад

Very common for the manifold converter to break up and plug the downstream converter. I've done quite a few. The manifold converter has 3 sections to it instead of one large medium and that makes it weaker and more susceptible (im guessing) to vibration from a motor mount or broken exhaust hanger... its usually just the last section of the manifold converter that breaks and the other 2 sections stay fine. I now only remove the downstream converter and will dump the broken stuff out and start the car and let it blow the remaining stuff out and then re install the converter. Even with the missing section of converter it doesn't set a p0420.

@billrimmer5596 4 года назад

These r the vids that give u all those followers. This is why I pay for premium. To thank u for all your old case studies. Premium is great for the scope classes. But this is what I want to c. U going to a car and filming what happens. Going on a test drive with your students. Breaking out the Verus. Fixing your old crap gauge. Soldering the bad wire on your MT2400 which by the way I have now. On the PT, remember the broken lead in the connector. U took it apart with us and resoldered and crimped. Fixed. When to call a computer. U said it. Basics. Take us to the diags. And turn on the camera. Caleb is great, if he is available. But if not, set up the tripod and SHOWTIME!!

@sonofdad0621 4 года назад

Misfire due to buildup on valves, notorious with GDI engines, pcv valve and blow by send all sorts of carbon gunk right back into the inlet.

@elrober707 4 года назад

"Full System Scan" Great quote!

@mike-yp1uk 2 года назад

Hey Paul you could make way more as a tech but I appreciate that God has called you to be an instructor. Everything in my career field has changed since I went premium. Tools are only as good as the user. Lol

@adilmchichou5710 4 года назад

Hello Mr danner I wanna be one day at your level I don't wanna say better because you're the master

@richard1835 4 года назад

Great Video. Thumbs up.

@attilakohbor3360 4 года назад

Nice , thanks Paul .

@ScannerDanner 4 года назад

Don't forget about the SD merch you see above me^^^^^^^^^ 100% of my proceeds will be going to charity. When I have the list complete, I will be putting them up on my website (who we will be helping). Right now I have a pro life group called the Human Connection that offers free ultrasounds to women considering an abortion and of course a ton of other benefits for these hurting woman. I also have Light of Life Rescue Mission (homeless shelter in Pittsburgh) and a list of about 5 or 6 more. I think I will probably only go with 3 charities for now, to get the most help we can to these people. So far with my merch being available for only a few days, we've raised about $150

@Ashroyer86 4 года назад

I like it. Pro life all the way.

@ScannerDanner 4 года назад

For sure! And to be honest, how could anyone, even those who are in opposition, not like the idea of giving a free ultrasound to a woman considering an abortion. The statistics of the mother keeping the child are staggering once they can see the little baby growing inside of them. Then to offer free counseling and prenatal care? What is not to like?? Oh wait, I know what it is, they also teach about the love of Jesus! And there in lies the real reason.

@kirkwest6654 4 года назад

This is great! I said last year if you get the Danner shirts id get one...

@ScannerDanner 4 года назад

Agree on these statements. The hypocrisy on the left is laughable. Anyway, mufflers don't get clogged unless it comes from the cat. So the only think left is to sell the job and warn the customer of the potential that they may need a muffler too, but you won't know until you drop the exhaust and look at the outlet of the cat. If pieces are missing, you need to go further. The other option is to drill a hole after the cat and take another reading

@SmittySmithsonite 4 года назад

Glad to hear that, Paul! As soon as my funds recover from a recent paramotor purchase (I'm gonna fly!!), I'll be buying a couple shirts. NICE work, man!! 👍👍 👍👍

@fire7765 4 года назад

Great video.

@tomiokasam2242 3 года назад

this is the kind of mechanic i need. i have a KIA and its doing the same thing this car is. except the low power it stalls when i idle in drive after the car warms up. having the crankshaft sensor checked actually TODAY LOL wish my mechanic did diagnostics like this guy by driving the car..

@ScannerDanner 3 года назад

If you are near Pittsburgh PA we can help you 😉

@tomiokasam2242 3 года назад

@@ScannerDanner wow that's awesome man but im in NH but looks like the repairs i had done did the trick, the video helped confirm my suspicions even more. Keep doing great videos well keep supporting

@joshuaparson3726 2 года назад

Out of curiosity what repairs did you do? I'm having similar issues

@tomiokasam2242 2 года назад

@@joshuaparson3726 i changed the sensor and the car stopped stalling. But ideals still feels very weak. Next thing replaced was my evap system, the case. They said not only did they changed my case but most the lines and valves with it. In total I only spent like 840 bucks but I also had my rear brakes done and an oil change and inspection. For just a evap system full overhaul is about 700 bucks so I got away pretty good. I also had history with the mechanic and stresses if they didn't wait to run a smoke test they would of found it sooner. It was a very small Crack in my case that was causing the evap code. But my ideal still feels alil sluggish and drops to the 500s sometimes when on a slight decline. Best luck

@AbbottAutomotive 4 года назад

Nice video. SD T-shirt also ordered!

@ScannerDanner 4 года назад

Awesome! Thank you. This will go to a good cause

@SmittySmithsonite 4 года назад

LOL at the music over you talking there, Paul! Was that Caleb messing with you on the edits? 🤣 FUNNY!! Then we got blinded by buttcrack again! 😂🤣😂 My wife is even learning things from your channel Paul! I thought she was watching her DVD there behind me as I was watching this, and she yells out to me as you and Caleb were just before the school driveway there, "He's got a plugged cat!" She's got a little experience with this, when I installed a '00 GMC Jimmy 4.3 into a '89 S10 Blazer she used as a winter beater. Since I removed everything off the '00 engine and ran a carburetor and HEI distributor assembly, the cat melted down 20k miles later, and left her going 10 mph up the hill to the house here. She's learning though! 😎 Excellent vid as usual, brother! Once Caleb starts diag'ing these cars himself along side you, you guys will be The Danner Diagnostic Team. 🍻

@roadkill5333 4 года назад

Hahaha!! When Caleb starts diagnosing these cars himself, Paul is retiring in that motor home to a ski resort in upstate New Hampshire!! SNOW AND BEER!!

@SmittySmithsonite 4 года назад

@@roadkill5333 - LOL, not a bad idea. I could visit him for a few - that's not too far up the road from here. 🍻🍻

@ScannerDanner 4 года назад

Damn straight!

@michaelszczys8316 Год назад

One of my greatest ' hair puller ' troubleshoots was where I changed a motor in a car ( old time- carburetor car ) hooked everything up and if it ran at all was very very slow idle. Hit any gas and it quit. Finally figured the old motor filled the cat up with a lot of oily carbon then it sat for a month. Plugged it up solid. Another tough solve, my daughter had jittery way of turning the key often resulting in partial starts that made engine try to run backwards. One time after doing so turning backwards a few turns made cam belt jump 3 teeth. It ran but only had about 10 or 20 horsepower and showed NO codes.

@JamesAutoDude 4 года назад

Some mechanics are lazy like you were talking about and just assume the customer is crazy 🙄 so thanks for saying that part about the customer wouldn't bring it if something wasn't wrong!

@meesau2112 4 года назад

great video!!!

@cesarjorgemurillobarientos1813 4 года назад

very good my brother

@tomjones4145 4 года назад

great video / thank you

@kevinkelley3657 4 года назад

~1996 I worked on a Pontiac Grand Am. The car belonged to Enterprise Rent A Car, and they brought it in for warranty work because everyone who drove the car complained of low power along with a strange whistling noise. The problem turned out to be a huge ball of tape in the intake pipping of the engine. This was a one year old car. IMHO Honda engines rock, and the older ones ~1995 were speed-density. I can sympathize with your rear facing crack problem. This problem is usually caused by too many bowls of chili, and too many cold snacks in the evening. I once weighed 245, now it's more like 315, trust me, I know what I am talking about.

@Nabeelco 4 года назад

OMG a MK1 VW cabriolet in the background! I have one of those! Looks to be 88-92 model year.

@walideamine9540 4 года назад

Best work

@martinboucaud679 3 года назад

great job .

@jordydereus 4 года назад

I love this video. 😃👌

@rodx5571 4 года назад

I was with the clogged cat early on. My cheap and easy/down and dirty test is just let it idle and put your hand near the exhaust pipe outlet, 99% of the time if it feels way too hot its a clogged cat (as a test for direction), fuel is burning in the cat, if possible i look at it with my thermal camera, or do the in cylinder transducer or back pressure test.

@dannymarcano9268 Год назад

Perfect video it sounds like the same problem that I'm having. Thanks. Would you know where I can find a flex pipe for a Kia forte 5 EX GDI I believe that the flex pipe got a hole from corrosion. And roasted the Bank 1 sensor 2. And now watching your video it just might have roasted the catalystic converter. It's my stepson's car, you know how it is 20 years old you have your first car and all you want to do is gas and go. Thanks again

@Craig1967 4 года назад

Great video, and great troubleshooting! I was going to guess major carbon build up on the intake valves since its a GDI engine with 100K or so mileage. That may still be part of the issue. I use one of those cameras on a flexible cables shoved through the intake manifold and look at the valves to look for excessive carbon build up blocking air flow. Please let us know what you find when the repair is complete. Thanks!

@ScannerDanner 4 года назад

Repair was completed in February and new cat was all that was needed. Thanks! What caused the cat failure, we don't know as everything looked normal (fuel trims etc) after the repair.

@dustinmerrill1952 Год назад

It's possible that too much silicon was used to seal the engine when doing a Timing cover reseal and if it got into the CAT it could cause it to die.

@akanecortich8197 3 года назад

GDI also has a Pressure Sensor on the high pressure fuel rail. That can become faulty and send faulty info to ECM. thus rich/lean can appear if pressure false high, false low psi. This would show on the LTFT

@gregoryfairchild2460 3 года назад

Good point P0420/430 codes usually true bc 02 sensors need to be good to mimic each other to set meaning nothing is getting converted to CO2/water vapor.

@gregoryfairchild2460 3 года назад

I have used my infrared temp sensor and took exhaust temp readings before cat/cat/after cat. Operating cat should increase temperature after the cat. Non functioning but flowing=no change. Clogged cooler after cat.

@gregoryfairchild2460 3 года назад

Flat rate..lol

@tracycolorado 4 года назад

another thing that you have to look at with low or no power is if the charging system and battery is good. worked on many a car who couldn't get out of its own way because of bad charging system

@Mikesky10 4 года назад

In this case what i do is watch the MAP pressure, at idle was at 10 inch, in a perfect good engine when you increase the RPM and hold it in for example 3000 or 4000 the pressure should decrease around 2 inch because there Is more vacuum, but when the CAT Is restricted the MAP pressure increase very high, around 15 to 20 or i saw even higher than 20, the MAP is an electronic vacuum gague

@billyr9840 4 года назад

Nice !

@juanortiz-nj9me 4 года назад

Men you are the best

@alfonsoguzman2099 Год назад

Using a vacuum gauge on the intake manifold is easier for identifying a restricted exhaust.also checking backpressure at upstream O2 sensor

@jamesbarratt593 3 года назад

Always nice to verify the data though. Know what I mean? Ok my data is you. Said a new cat would fix it but also said unsure of if it had plugged exhaust 100 percent only needed to get that out of your mind. I know you showed the vacuum test, but still would have been nice to have seen it after the new cat.

@user-io3hw7hx7q 4 года назад

a diagnostic work up thanks

@martindelgado7685 3 года назад

I’m sorry if I’m too late but I’m just wondering what would be looking for “measurement wise” if you would of been able to use your pressure transducer and pico? Thank you! Excellent video as always!

@ScannerDanner 3 года назад

I have some restricted exhaust testing videos in my Chapter 1 playlist where I'm using the pico and psi transducer. Thanks!

@heyinway 4 года назад

Careful with those hoody strings getting caught in a fan or belt pulleys ! Hope to shake your hand on the 24th at car show.

@strongbow549 4 года назад

Hey Paul, is a voltage drop between battery negative and the engine block of 0.5volts during cranking a bad thing? I have got your book and your teachings are keeping my 18 year old BMW on the road. Big thanks for all your videos.

@emceecoldharted2419 4 года назад

0.1-0.2 is ideal, but I doubt 0.5 would cause an issue

@DAZ_SR 3 года назад

My dealership sells quite a few used kia's in the 90 to 100k range. Most have some sort of "no code" misfires which tend to act up when the coils get hot. That along with the cold start misfire from the GDI carbon issues. My guess is the common Cat Efficiency problem is 10's of thousands of miles of misfire rich. Your thoughts?

@TheCrystalGlow 3 года назад

That clacking sound or rattle is the exact same sound I have!

@Splashfun2000 7 месяцев назад

I know this is an older video but this may benefit someone owning a Kia and having low power issues and all the normal diagnosis, i.e., fuel pressure, compression, ignition checks out okay and even some of the common checks of the cat converter seem okay (the 1st or main cat converter that is). Long story short, my daughters 2011 Kia Sorento started acting up, low power, erratic shifting, most of the time no codes, checked ignition, checked fuel pressure, checked compression, did a back pressure test of the main catalytic converter and that seemed fine at idle, emphasis on idle, did not check it at higher rpm which turns out was a mistake, cat converter had just been replaced like 2 yrs earlier so did not think it was that. Pulled transmission and put in new torque converter, same problems, put in new fuel pump, map sensor, throttle body, same result. Finally took it in to dealer thinking/hoping that maybe the factory diagnostics would pick up something, they checked everything I did and said needed a transmission. I still was uncertain with that diagnosis (dealer wanted $3500+) so went and got a reasonably priced used transmission and tried that, same symptoms, driving me crazy by now, saw some comment online about taking out O2 sensor or loosening the connection on exhaust, did that and bingo. Turns out the second catalytic converter was plugged, all Kia's and Hyundai's have two, the 2nd one isn't monitored at all, it's just extra. So if you have a Kia or Hyundai acting up and all the normal checks you would do are normal, dig deep into the cat converters, both of them and don't take it to the dealer.

@ScannerDanner 7 месяцев назад

yes sir, backpressure testing should ALWAYS be done at higher RPMs. The spec I use is no more than 2psi at 3000rpm in park. Thanks!

@dominicdo 3 года назад

Next time you suspect a restricted exhaust pull the upstream 02 and go for a drive, if the power comes back then it's a restriction in the exhaust. 5 Minute diagnosis.

@chim_richalds3798 2 года назад

Thank you very much . Great advice

@throttlebottle5906 4 года назад

Guaranteed Destruction Incorporated :))

@TheDisgruntledMechanic 4 года назад

Great diag and approach as always Paul! And thanks for the non-butt crack video! haha!

@ScannerDanner 4 года назад

Caleb is funny. He's getting good at messing with dad

@mostlymoparih5682 4 года назад

@@ScannerDanner That's what kids are for.

@smms1276 4 года назад

👍 👍

@mostlymoparih5682 4 года назад

@@ScannerDanner You guys crack me up, butt Shirley you jest.

@dro2204 4 года назад

Freaking KNEW IT!! Just by your test drive!! Paul gotta question! any good resources (besides the obvious experience) that can make me a better diagnostic tech? Thanks in advance!

@ScannerDanner 4 года назад

You a Premium subscriber? :-)

@JoitaConstantin 4 года назад

Watch these videos and you can practice on electude, which is quite interesting.

@ablackformula 4 года назад

I feel like the single-point testing of the exhaust pressure only proves a blockage behind the gauge. Could be cat, could be a kinked pipe, possibly a muffler or resonator. Isn't a second pressure reading warranted? I'd imagine the post-cat o2 sensor would be ideal to really zoom in on the blockage. And I was hoping to see some waveforms for the GDI injectors, even though you had no reason to do so here lol. Thanks for all the awesome content and teachings you provide!

@ScannerDanner 4 года назад

Nope, never saw a plugged exhaust that wasn't the cat, though I have seen a plugged muffler that has pieces of cat in it. :-) Anytime you have a restricted exhaust, it is always the cat the caused it. Just have to warn the customer they may also need other components downstream of the cat if pieces of the cat are missing. Of course there are variables. Like a crushed exhaust lol but that would be obvious.

@Spelter 4 года назад

Hey Paul, I had a Ford Escape with a melted cat with drove to our garage with misfire codes. After looking at the plugs, we say it needs new ones and one new coil. We put it back together and ot wouldn't start anymore. I saw exhaust gas coming out of the throttle body and said it is a plugged exhaust, but my friend, who thinks he knows everything on cars, refused the idea. Listen to him was a mistake of me, because he fired the parts canon at it: plugs, coils, cam sensor, airfilter, compression tests, a lot of Forscan checks.... After 2 weeks, I said we go back to the beginning and I pulled one plug, put it in the coil and used a jumper cable for the mass. This time, I let the fuel relais in the pcm and started the car. It ran and exhaust gas was coming out of the plug hole. He didn't believe it was the exhaust system, so I put the plug back into it, car is not starting. I even had to get a friend on the phone, who said the same thing. I removed o2 sensor of bank 1 and then bank 2, one at a time, it ran. It was cat number 3 what was melted. I use an angle grinder to open it, remove its contents and weld it up until they could afford a new one. Car ran like it should then. Moral of the story: Never listen to somebody, who has no basic knowledge of engines and use your brain. And thanks to you, I learned a lot in the last year and how to use and oscilloscope to find such problems. My friend has still problems with his VW Lupo, but after he told me I don't know anything at cars, he could fix his problems without me, and the Lupo sits since April now.

@ScannerDanner 4 года назад

Nice job my friend! Keep it up and people will start listening to you

@Spelter 4 года назад

@@ScannerDanner Thanks. Everytime, you test a coil or the cable, you should test the cable first if it is ripped or damaged. I got zapped today: www.reddit.com/r/Justrolledintotheshop/comments/e2j06g/got_zapped_good_today_cable_was_broken_and_i/ *damn*

@alexmessina3383 4 года назад

Thanks Paul and Caleb for enduring the cold ;-) Keen to see that diag of the Lexus with the shifted keyway. Can't find it. Do you have a link?

@ScannerDanner 4 года назад

It's on my Premium channel on my website. Are you a member? Use the Premium search and type in Lexus

@marcmigneault8364 4 года назад

Driving the car without the upstream O2 can confirm the cloged exhaust in a pinch. Great video, as usual!

@ScannerDanner 4 года назад

I've done that!

@mikeoneill7360 4 года назад

I’m just curious, would the temperature inside the cat confirm any type of blockage when observed on the scan tool? Nice job overall Paul, thanks.....

@chrismechanic2000 4 года назад

from memory i think the temps would be about 250c at the front and slightly higher at 300c at the back of a working cat, i would imagine if it was plugged you would see lower temps due to the fact that the reaction would not be happening to raise the temps.

@ScannerDanner 4 года назад

Cat temp tests are too variable to rely on for absolute answers

@foonijani 4 года назад

5:57 13:25 my car is making exact same sound at 4500rpm at 4th gear and 105km. Wont climb hills over 100km. Seems like plugged exhaust is the culprit in mine as well. Fuckin took few months figuring it out cause i was only looking at fuel, spark and air. Thanks to this video, it might be problem in mine.

@hybrid11111 4 года назад

Could be something related to GDI intake carbon deposits? Restricting the amount of air entering the engine. Since the engine has no MAF sensor, too much fuel and too little air, too high EGT, maybe even unburned fuel entered the cat and burned there, so cat melted. What do you think?

@1fnjo790 4 года назад

Don't really need a pressure transducer or scope .Even in open loop mode an exhaust restriction of that magnitude will cause a slow to rev kind of bogging sound when revving up an engine. After removing the upstream O2 sensors and briefly repeating the rev up to 3k you will immediately be able to tell the difference on how quickly it will now rev up and see a difference in engine vacuum on a gauge teed in to brake booster hose or pressure off EGR transducer or DPFE hose. Beware that there is some risk of uncorking upstream O2 bung holes. Besides risk of fire or heat damage to un-shielded surrounding items. It can also cause pieces of loose substrate to start circulating and jettison out the open O2 sensor holes at high speed or even swirl around the substrate back up into the exhaust manifold and possibly get ingested into cylinder with an open exhaust valve due to valve overlap at the start of the intake stroke. If anything shakes or rattles within the cat when rapping it with a plastic mallet, it might not be a good idea to rev up motor with the upper O2 bung holes open and risk circulating around loose substrate that could cause further engine damage if it hasn't already occurred.

@crazygouf 4 года назад

Kias and hyundai GDI motors have a fairly common issue of injectors leaking usually causes misfires but could be a reason as to this cat melting down

@foxholewilly 4 года назад

Paul, could you have gotten the positive pressure intake reading, that you were hoping to see on the scan pid, by just using that vacuum gage connected to the intake? Also, would you feel that symptom in the brake pedal from the reduced intake negative pressure available? Hope you feel better, thanks.

@ScannerDanner 4 года назад

This was a long time ago, so yeah, I'm good now :-) As for the vacuum gauge? Possibly you could have seen a positive pressure. No on the brake pedal, it wasn't bad enough for that as idle and low speed it wasn't too bad

@James-fs4rn 4 года назад

👍 Could a press gauge have been tapped on the intake to measure what you were trying to see in the map sensor? What does a cylinder pressure test indicate? How does it work? No worries if no time to answer. Thanks again!

@ScannerDanner 4 года назад

Watch the two videos I have listed in the end screen of this video!

@abdulb7178 4 года назад

May be you should put DOG in stead of CAT😂😂😂

@DAZ_SR 3 года назад

at 18:07 I can see why you're starting to think about timing. Remember when the desired and actual VVT was? Really enjoy your thought process, but how you won't let yourself go to the next step until you've crossed off the obvious.

@chrismechanic2000 4 года назад

another great vid mr danner, all i can say is wow, a 2 year old car needs a new cat wtf? are we sure the backbox or mid silencer isnt collapsed internally? my old bmw 2002 had 180,000miles on the original cat and damn, the original complete exhaust system, the only thing i ever changed was the o2 sensors at 150,000miles, never buy a kia people.

@MrSamadolfo 4 года назад

🙂 i think its because its a KIA or they dont drive it enuf on the highway to clean out the CAT, emmissions are only done here every 2 years so i guess after u pass just swap out the CAT and save it for the next test date 😊

@wysetech2000 4 года назад

chrismechanic Your comment is foolish. Just because it's a Kia with a plugged Cat and your BMW was perfect it doesn't mean it's a bad car. We have customers that drive Kia's at high mileage and can't kill them at half the price of a BMW. BMW has plenty of it's own problems as all brands do. A Cat for a BMW is twice the cost of one for a Kia as well.