2014 MAZDA 3 2.5L- REPLACING FRONT BRAKE PADS & ROTORS - MADE IN JAPAN - Easy DIY

Подписаться 43 тыс.

Просмотров 19 тыс.

50% 1

amzn.to/3fmNbQX - Versachem 26080 Synthetic Caliper Grease
amzn.to/3SPlfmL - [2 Pack] Brake Caliper Hooks
amzn.to/3U5NH4E - Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
amzn.to/3DjBS3Z - TEKTON 1/2 Inch Drive Impact Universal Joint | SIA22102
amzn.to/3UbTAxs - Milwaukee 2567-20 M12 FUEL Brushless Lithium-Ion 3/8 in. Cordless High Speed Ratchet
amzn.to/3fo0alD - Milwaukee 2560-20 M12 FUEL 3/8" Extended Ratchet
amzn.to/2ZBs7u5 - GearWrench Torque Wrench used in video
amzn.to/2ZyyHl7 - Brake Cleaner
amzn.to/3T40p3b - Wire Wheels for drill
amzn.to/3Dp4zwF - Permatex 80078 Anti-Seize Lubricant with Brush Top Bottle, 8 oz.
amzn.to/3zCGEZA - Permatex Threadlocker 6 Ml Blue
amzn.to/3sIqz0v - Milwaukee Safety Glasses
amzn.to/3NtOCdi - [Front & Rear] Detroit Axle - Ceramic Brake Pads with Hardware Replacement for 2014-2016 Mazda 3 3 Sport - Japan Built Manual Parking Brake Models - 4pc Set
amzn.to/3E0NieR - Power Stop 17-1728, Z17 Front Ceramic Brake Pads with Hardware
We got the brake pads and rotors at our local O'reilly Auto Parts Store.
Just a quick video showing how to replace the front brake pads & Brake Rotors on a 2014 Mazda 3 2.5L Japan Built. You will need to check your vin number to determine if your vehicle is built in Mexico or not. Thankfully our local O'reilly Auto Parts Store was able to look it up for us and determine which parts we needed.
Tools needed:
A large screwdriver or prybar
13 mm Wrench or socket with ratchet and/or breaker bar
17 mm socket or wrench with breaker bar or impact wrench
brake caliper grease
wire brush or drill with wire brush attachment (wear safety glasses)
anti-seize
Torque Wrench
Torque specs I found online:
Caliper slide pin bolts 20-22 ft lbs
Caliper Support Bracket bolts 68-81 ft lbs.
I also did the rear brake pads & rotors on this same vehicle. Here's a link to that video if you need it: • 2014 MAZDA 3 2.5L HOW ...
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
'All I Am' by Dyalla
As an Amazon Associate I earn from qualifying purchases.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@Andrew1McCorquodale Год назад

Great video. I’m going to give mine a go on Saturday. I actually really appreciated seeing the trouble you had getting the pads into the clips. Great to see the potential challenges and how to work through them. Really great video!

@caetanopinto5939 Год назад

Thank you so much for these video I’ve just changed my 2015 Mazda 3 and saved $250 on labour and the breaking is so much better

@bastogne315 2 месяца назад

Garage did front brakes. Left split and rusted slider pins insitu. Reused old hardware. Used no anti seize. Didnt use wire bush any where. Had to re do the whole thing myself.😂

@4jamied 2 месяца назад

nice video. Really appreciate how you don't edit the video to take out the "challenging" parts! Thank you!

@greekboydinos 8 дней назад

you've got a gift for teaching--thank you!

@DantheFixitMan 8 дней назад

@@greekboydinos Thank you so much! Take care, -Dan

@RaymondLohengrin 7 месяцев назад

Thank you so much for this video, it was very helpful. I did this job on a good friends car today, the Japanese made. While doing the repair I found out two helpful things. If only the bottom 13mm screw is removed and the top one only loosen, the top screw can be used as a hinge to raise the metal casing up and out of the way, it leaves plenty of space for the job. One of the old pads can be used to compress the piston. Place the old pad against the piston, there is a nudge on the pad that can be also inserted on the casing, use a large screw driver inserted in the casing to push against the pad to easily compress the piston. I hope this can be of help.

@bastogne315 2 месяца назад

Very thorough. The rubbers split on my pins. Gonna clean out the holes the pins slide in. They are really dirty.

@seanxxx8999 Год назад

The brake pad clips are different on these cars. Be mindful which came from the top and from the bottom. The clips with the longer front goes on top if I remember correctly. Also, don't mix up the slide pins. The one with the rubber bushing goes on the bottom.

@DantheFixitMan Год назад

Thanks for the info!

@dannyzamudio1252 Год назад

@@DantheFixitMan whats the torque specs on tires on a 2015mazda 3

@versatile.mindset Год назад

tq to 90*

@joey9193 Год назад

Tonya Harding-- killing me matey 😂

@bastogne315 2 месяца назад

She cut the guys di c k off??

@SlowCarsFastSFV Год назад

Thx! Great vid. For some reason the stock Mazda hardware for the front is a 2 part shim. An inner anti-vibration shim goes on the inside. It seems to keep things quiet longer and you can grab them at the dealership for a little over $10. Has a packet of grease too.

@BryceCruzman 7 месяцев назад

Props for the tonya harding shout out.

@StevieMcMullenJr-ph1gr 3 месяца назад

excellent video. Yeah inserting the break pads is very very hard. Possibly the pads fit too tight. Hope not to cause overheated calipers. There is no easier solution to sliding the pads in the brackets. Its just frekin hard man

@BryceCruzman 7 месяцев назад

Ive learned that if your new brake pads are not seating in easily, do not force it or fight it in. They can definitely be too tight, which will cause rhe lad to stay pushed against the rotor even when you're not applying the brakes while driving. Then you brakes overheat and burn up all the lube in the caliber pins, and damages the capiler as well. Instead, take a dremel tool to the spot on the pad base that is causing it to stick. Takes 30 seconds. After that it will slide in like butter. These pads are made in China with poor quality control most times.

@bastogne315 2 месяца назад

Really good.

@robgul4733 4 месяца назад

Any chance you could show me the jack point on the frame that you use!? Im unsure where to jack it up

@notsureigaf 4 месяца назад

9:49 I spy a VGG enjoyer

@bastogne315 2 месяца назад

Dude had the same prob getting the pads on the rear carrier. Totally ridiculous.

@Username-es1iy 7 месяцев назад

8:51 mine isn’t moving? What does that mean

@DantheFixitMan 7 месяцев назад

That means your slide pin is stuck. You might be able to free it up with some penetrating oil and then clean out the opening really well. If you can't free the stuck slide pin, you will probably need to replace the caliper bracket and get new slide pins. Best of luck to you!

@Username-es1iy 7 месяцев назад

@@DantheFixitMan thank you I’m gonna need it. The slide comes out, I cleaned it and lubed it but it’s just stiff and doesn’t bounce as the one next to it. It’s hard to pull up and down