Тёмный
No video :(

2015-2018 Chevrolet Colorado 30-inch LED Light Bar 

Matty's Garage
Подписаться 11 тыс.
Просмотров 53 тыс.
50% 1

Yes boys!!! Bar Light installed!! Make sure to follow me on instagram:
Follow me on Instagram :
/ matt.1003
Light bar:
amzn.to/2BKhVV7
Pro Clip USA:
www.proclipusa...
LED lights:
amzn.to/2DNHx3G
CHEVY GRILL:
www.shopchevyp...
Bed Lights:
amzn.to/2tqvzYO
Third Break light/Bed light:
amzn.to/2EgoHDS
Cold Air Intake:
amzn.to/2EfSufU
Disclaimer:
Due to factors beyond the control of Matt1003, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Matt1003, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Matt1003.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

 

5 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 92   
@lamardebo5340
@lamardebo5340 4 года назад
Does the red led light on the switch stay on when the car is off?
@this_is_nick
@this_is_nick 5 лет назад
You shouldn't ground anything to your battery, it could cause a spark. Instead connect it somewhere on the frame.
@vanbilly8387
@vanbilly8387 9 месяцев назад
First video that I've seen that actually talks about and shows cutting those plastic things out of the bumper. I was wondering about that for my daughter's Colorado.
@NoFksGvn4U
@NoFksGvn4U 5 лет назад
What made you go with the straight led bar vs a curved one?
@michaelbrooks4023
@michaelbrooks4023 4 года назад
Got the same one installed in the same place on my 2016 Colorado and love it.
@MattMc1992
@MattMc1992 5 лет назад
some one finally make a light bar install on a Colorado wanted to do this on mine but wasnt sure what was involved, looks good
@Matty.Garage
@Matty.Garage 5 лет назад
Thank you man!!!!
@500krp
@500krp 6 лет назад
Looks awesome! Your neighbors will know when you are coming home after dark! :)
@Dwayne7834
@Dwayne7834 6 лет назад
Nice and neat job. I would keep a eye on the temperature of the engine. On another you tube channel that I follow.They say they asked the engineer at Chevy about why they made the air dam so long was because of engine cooling. Great video
@Matty.Garage
@Matty.Garage 6 лет назад
Thank you man!
@curtbodway4826
@curtbodway4826 5 лет назад
Great video Matt. Just found you on RU-vid and im looking forward to doing some of these mods on my 18 Colorado. Keep it up!
@Matty.Garage
@Matty.Garage 5 лет назад
Thank you!! And welcome to the channel! 😁
@lakeguild
@lakeguild 4 месяца назад
You're the man. Best!
@mxrider1166
@mxrider1166 5 лет назад
Thanks for the video. Did this install yesterday. Ur vid made it super simple. Keep the vids coming man!
@Matty.Garage
@Matty.Garage 5 лет назад
Glad to hear man! Im super happy to hear that you got it!
@ryangeorge1049
@ryangeorge1049 6 лет назад
Love watching the videos bud..... You helped me pick out my Colorado. Just brought it home. 2018 Redline Edition. Looks amazing. I'm enjoying your videos even more.
@Matty.Garage
@Matty.Garage 6 лет назад
Glad to hear man!!
@marvinletief1028
@marvinletief1028 5 лет назад
HI, i came back to this old video, cause i was working to remove my bumper, and i had a problem, just tell me please, did you had a problem putting back the upper bolt with the led light in place ? how did you done that ?
@RR_12014
@RR_12014 6 лет назад
WOW!!! that was an awesome video!! I might just get one for my 2016 colorado!! Looks easy enough to install. I wish you filmed the part to connect the wires to the battery, but seems easy enough! thanks for the vids and keep up the good work man!! I just subscribed, waiting for the next vid!
@Matty.Garage
@Matty.Garage 6 лет назад
Nice man! Welcome!!! It is very easy ... it comes with the instructions when you buy the bar light.... but Red goes to the positive and black to negative!! It is easy like it sounds!!! Let me know if you have any trouble! :)
@okbairport1117
@okbairport1117 5 лет назад
Looks great! But have you noticed any cooling issues by chance? Looks like it blocks that air inlet. Chevy does not recommend putting a light bar in that location for that reason is why I was asking. Sweet truck!
@helbertmatuteh.648
@helbertmatuteh.648 Год назад
Me gusta mucho el Chevrolet COLORADO ZR2 es una excelente maquina
@irishviking6444
@irishviking6444 5 лет назад
I wonder if you had left the light bar out until the end if you could leave those fins in the bumper? Not sure how far forward the bar is and how far back the fins are. Obviously with putting the bar in first it wouldn't be possible, and putting the bar in afterwards would make wiring a nightmare, but just wondering if you could avoid having to cut those.
@Matty.Garage
@Matty.Garage 5 лет назад
hey man! I tried to left the bumper in "one Piece"" but the bar light didn't fit ... :(
@robertmontoya1185
@robertmontoya1185 5 лет назад
Hey Matt when re-installing the bumper how did you get the 2 bolts that go behind the light bar back in? Were they hard to get to?
@bobbycarrenas1666
@bobbycarrenas1666 Год назад
Where did you find those brackets , I have a 2016 colorado and bought a 30 inch light bar from rough country to install but I like those bolt on to factory install brackets !! Do you have a model number !
@dirtyagent22
@dirtyagent22 5 лет назад
Love it Matt! I have a 2017 Colorado WT that I want to add this bar to, but like the other comment I'm worried about the air blockage. The length of the bar looks perfect !
@ryryyt8644
@ryryyt8644 6 лет назад
Dang I had no idea that could go there thank you Matt giving me more good ideas for my dream one day i will get it
@Matty.Garage
@Matty.Garage 6 лет назад
You are welcome man!!
@collinfrarer7921
@collinfrarer7921 3 года назад
Have you had any problems with the air intake with the lightbar blocking that air way?
@bborchardt77
@bborchardt77 3 года назад
Matty did you really have to cut the little tabs on the bumper?? Or could it be flush?
@Matty.Garage
@Matty.Garage 3 года назад
Unfortunately you have to cut it
@januaryfire3925
@januaryfire3925 6 лет назад
WHAT SICK! NO WAY!
@tzwc3571
@tzwc3571 5 лет назад
Matt looks great! My concern that light bar is blocking 1/3 the air flow to the radiator! Running hot possible engine damages, and throws the emission system off to run lean! I seen a wrx w a big light bar on the bottoms blocking air flow to the inter cooler !
@beetle8686
@beetle8686 4 года назад
any problems with flickering? i have the same setup but everytime i hit a bump, or even sometimes when not, the light bar flickers so bad i just end up turning it off.
@elishacombs1457
@elishacombs1457 4 года назад
Is there a way to hook into the existing system? Like the light bar comes on and off with your bright lights? So you can eliminate the button I drive early in the morning and want it for the purpose of seeing better but it also looks stylish.
@kevinvoyer5053
@kevinvoyer5053 3 года назад
Hello again! Yes looks very nice. But how much light does that setup actually throw? Is it a total flood? Or is there some type of direction control? I have a Colorado WT CrewCab 4x4, V6, all white like yours, however I have a chrome grill. If I go all through that trouble I will paint the grill summit white like the truck. That’s the only issue I have, is weak lighting, especially the WT, I had a Z71, before the WT, that had the projector lights like yours and they are a bit better!
@DaJokrz
@DaJokrz 5 лет назад
My only problem is that they still dont make these kits to tie the lightbar to your highbeams. My lightbars have both been tied to the highbeams so that i dont have to fumble for a silly button when i see traffic coming. 99% of the people that i get blinded by have there bars seperate from there highs. They turn highs off then its another few seconds before the bar gets shut off...
@saltysam203
@saltysam203 6 лет назад
It looks like the switch has a red light when the lightbar is off. Wont that run your battery down?
@DJCARBON2012
@DJCARBON2012 4 года назад
Looks awesome, Can you tell me if its possible to install a 32 inch light bar? is there enough space for an additional inch on either side?
@marvinletief1028
@marvinletief1028 6 лет назад
Wow man...........how clean your job man, i love it, very powerfull, yes i enjoy your videos a lot.....i'm gonna be in NJ in 2 weeks, hope u r in the same corner , we may have a drink for that :)
@Matty.Garage
@Matty.Garage 6 лет назад
Nice man! We can try it! :)
@marvinletief1028
@marvinletief1028 6 лет назад
Matt 1003 im gonna be in Raritan Area with my wife , are u far from this corner?
@keener1114
@keener1114 5 лет назад
Nice video. Was it difficult to re-install the bumper? Thanks.
@tomasgomez6613
@tomasgomez6613 4 года назад
Thanks for your video! I did it in my 2015 GMC Canyon and it look awesome.
@jordanvanier8186
@jordanvanier8186 5 лет назад
Awesome video buddy! keep up the good work!
@Matty.Garage
@Matty.Garage 5 лет назад
Thank you for the support man!
@agontop1
@agontop1 4 года назад
Great vid Matty.. Catching up on your old videos.. Hope you laid off the “boys” in future vids lol.. Im home alone and its late and every time you say boys, it makes me feel a little uncomfortable on the inside haha keep up the great work bro. I have a ZR2 and Im finding a lot of your content very useful and worthwhile of watching.
@Matty.Garage
@Matty.Garage 4 года назад
Thank you buddy!! ZR2 is a monster love it!! And don’t be scared about the “boys” 😂🤣
@agontop1
@agontop1 4 года назад
Matty's Garage LoL I’ll work on it..
@jmoneygaming8564
@jmoneygaming8564 6 лет назад
Looks good might do that to my colorado one day
@Matty.Garage
@Matty.Garage 6 лет назад
Go for it man! It makes a difference at night!
@jmoneygaming8564
@jmoneygaming8564 6 лет назад
I'm sure it does 👍. I love your videos gives me ideas for my truck and I can see how it looks also
@armandobriones7220
@armandobriones7220 6 лет назад
Looks awesome Matt!!! 🔥 🔥
@Matty.Garage
@Matty.Garage 6 лет назад
Thank you Man!
@UpNorthMotorsports
@UpNorthMotorsports 6 лет назад
Looks good might have to get one myself
@Matty.Garage
@Matty.Garage 6 лет назад
It is worth man!
@michaelc1422
@michaelc1422 6 лет назад
Looks great!
@davidanddiana7173
@davidanddiana7173 6 лет назад
Very cool Matt Wow I like your truck
@tylertman3469
@tylertman3469 2 года назад
How's it holding up?
@Matty.Garage
@Matty.Garage 2 года назад
Perfect so far
@tylertman3469
@tylertman3469 2 года назад
@@Matty.Garage would a curved one fit?
@joseamador1539
@joseamador1539 6 лет назад
Awesome Matt👍👍👍
@peteg7446
@peteg7446 5 лет назад
Nice install video 🖒
@Matty.Garage
@Matty.Garage 5 лет назад
Thank you man! Glad you like it !
@loganshaw6155
@loganshaw6155 6 лет назад
That’s sick, man! Great job. Random question: where did you get your phone holder for the cab? I need one.
@Matty.Garage
@Matty.Garage 6 лет назад
Sure man! If you look at the cold air intake video... there is a link fot the clip in the description!
@guaiaco23
@guaiaco23 6 лет назад
nice job bro! 🙏
@Matty.Garage
@Matty.Garage 6 лет назад
Thank you man!
@3minutesout510
@3minutesout510 5 лет назад
Does this light bar not come with the mount?
@Matty.Garage
@Matty.Garage 5 лет назад
No ... you have to buy the brackets
@562racing7
@562racing7 5 лет назад
how has the cooling been?
@Matty.Garage
@Matty.Garage 5 лет назад
no problems so far!
@MarkBrenner
@MarkBrenner 5 лет назад
Strongly considering doing this to my canyon now 🤔 check out my mods on my channel
@maddopalcutter2441
@maddopalcutter2441 5 лет назад
I cant stand the amount of plastic they used on these new vehicles, should be all metal.
@Matty.Garage
@Matty.Garage 5 лет назад
I know... it is going to get worse:(
@javar2r3ra
@javar2r3ra 5 лет назад
Then you'd complain about fuel mileage.
@maddopalcutter2441
@maddopalcutter2441 5 лет назад
@@javar2r3ra maybe some but iv never owned a new truck so all i know is 12-18mpg which is fine with me, id rather have metal protecting my engine bay then plastic. Lol
@javar2r3ra
@javar2r3ra 5 лет назад
Dready Locs well, good luck finding one made with metal nowadays.
@wisbear6533
@wisbear6533 5 лет назад
There fender flairs not flamurae flairs. And I don't think I have ever heard someone talk so much before even starting work ..
@Matty.Garage
@Matty.Garage 5 лет назад
Have to explain thou!
@lisabeheler6503
@lisabeheler6503 5 лет назад
Looks good but you ito quit addressing “the boys “. I drive a 2017 Z71 and do most of my mods. And yes I’m not a dude
@Matty.Garage
@Matty.Garage 5 лет назад
Hah! You are completely right!! To be honest ... I thought about this when I was recording ... Thank you for letting me know! :)
@griffinharland2953
@griffinharland2953 5 лет назад
its a light bar. not bar light
@Matty.Garage
@Matty.Garage 5 лет назад
You are right!!
@glenn098765
@glenn098765 6 лет назад
Get to it less talking more working
@Matty.Garage
@Matty.Garage 6 лет назад
Thank you for watching.... no stress ... take your time!
@glenn098765
@glenn098765 6 лет назад
@@Matty.Garage I have the zr2 I think it might fit but I have to do a little research
@TheCarCrazyGuy
@TheCarCrazyGuy 6 лет назад
Looks great!
@sagenod527
@sagenod527 4 года назад
Do you know if the Dual version of this lightbar fits in the bumper or does only the single row one work?
@Matty.Garage
@Matty.Garage 4 года назад
I believe it will fit ... a friend of mine has the same dual and it looks good
Далее
2015-2018 Chevy Colorado - Air Dam Removal
10:17
Просмотров 49 тыс.
2017 CHEVY COLORADO GRILL INSTALLATION
14:27
Просмотров 92 тыс.
C6 Corvette Long tube Headers & Corsa Xtreme (LOUD)
4:00