Тёмный

2015-2020 Ford F150 UCA Upgrade Tuff Country Upper Control Arm Replacement And Install 

A Guy and His Projects
Подписаться 10 тыс.
Просмотров 14 тыс.
50% 1

2015-2020 Ford F150 UCA Upgrade Tuff Country Upper Control Arm Replacement And Install. This is a fairly easy job, just also fairly involved. These UCA's allow you to lift the truck and eliminate any coil spring contact you may have without replacing them. Installing these Upper Control Arms on this 2020 F150 wasn't all that difficult by standards of other things I have done. However if you don't typically venture past the DIY of an oil change, this will probably be on the more advanced side of projects. This is not to say you can't do it, just a heads up.
As an Amazon Associate I earn from qualifying purchases.
Upper Control Arms Used: amzn.to/3kNGlS1
To donate financially to my channel via Paypal:
www.paypal.com/cgi-bin/webscr...
Check Out Jordans Channel (the owner of this truck)
/ @truthprojects
0:00 Intro
1:25 unboxing
2:22 Replacing/upgrading upper control arms
10:11 Summary

Хобби

Опубликовано:

 

7 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@AGuyandHisProjects
@AGuyandHisProjects 3 года назад
As an Amazon Associate I earn from qualifying purchases. Upper Control Arms Used: amzn.to/3kNGlS1 To donate financially to the channel via Paypal: www.paypal.com/cgi-bin/webscr?cmd=_donations&business=5PRRGY4GM2CSE&currency_code=USD
@crb22205
@crb22205 Год назад
I installed these on my 2013 F150. They kicked the front end out wider. Brought it straight to the alignment shop to get it all dialed in, but man this truck now wanders all over the road. I can’t figure it out, but it’s a very noticeable wander vs before the install. I’ve had several sets of eyes go over everything to make sure I didn’t miss a simple bolt or anything.
@AGuyandHisProjects
@AGuyandHisProjects Год назад
Let us know when you figure it out! Perhaps somebody else will be looking for a solution to the same problem
@jessielees
@jessielees Год назад
did you ever figure this out? Im looking at these too and I find it curious the tuff country website says " Requires aftermarket wheels with 5" backspacing or less."... I was hoping to use them with my factory wheels - i have the same ones in this video...
@SCHULTZEH
@SCHULTZEH 3 дня назад
Camber kit needed 🤔
@linodelacruz1581
@linodelacruz1581 Год назад
When you tightened the castle nut, did you do it all by hand until it tightened or did you use a torque wrench? I just tightened my passenger side one and it got all cross threaded within a minute or two.
@AGuyandHisProjects
@AGuyandHisProjects Год назад
Start by hand and finish with either wrench or impact. Depends on room and what I have out already lol
@linodelacruz1581
@linodelacruz1581 Год назад
@@AGuyandHisProjects got it. I happen to lose the driver side adjuster link, that little ring that you put in the knuckle, do i really need it, or whats the point of it
@overlandescapades5720
@overlandescapades5720 Год назад
I know people who do this without removing anything but brake lines brackets. No point in removing the coil overs or swaybar
@AGuyandHisProjects
@AGuyandHisProjects Год назад
Good to know!
@antoniocapilupi1225
@antoniocapilupi1225 2 года назад
The metal piece you slid in doesnt look like mine, mine is almost as big as the bushing, i wonder if its packaged wrong
@AGuyandHisProjects
@AGuyandHisProjects 2 года назад
You talking about the bushing? Maybe they put the wrong one in the package. Did you contact them yet?
@antoniocapilupi1225
@antoniocapilupi1225 2 года назад
@@AGuyandHisProjects i did, they want, me to take a picture of the part send it back etc, im gonna see if napa etc has them
@AGuyandHisProjects
@AGuyandHisProjects 2 года назад
I would imagine they'll have something. Or even ace hardware
@antoniocapilupi1225
@antoniocapilupi1225 2 года назад
@@AGuyandHisProjects I’m going to check I’m trying to do it this weekend supposed to be beautiful weather here in South Florida
@Steve-qq2wj
@Steve-qq2wj 3 года назад
The rims on your truck are factory ? No issues with the new UCA and factory rims
@AGuyandHisProjects
@AGuyandHisProjects 3 года назад
He has aftermarket rims on his truck so I'm not sure if there would be any issues with factory or not. Hopefully somebody who knows will chime in
@Brightleaf_Auto
@Brightleaf_Auto 3 года назад
Those are the factory wheels in the video. Most UCA manufacturers say you need at most 5.5" backspacing where the factory are closer to 6".
@jasonrichmond5907
@jasonrichmond5907 3 года назад
He should have any problems with factory wheels as long as his tires aren’t wider then 11 or 11.5 inches. I forget which one it is.
@coyotecustomz2875
@coyotecustomz2875 2 года назад
How well did these hold up over time
@AGuyandHisProjects
@AGuyandHisProjects 2 года назад
He's still running them no issues!
@blakeberry518
@blakeberry518 Год назад
My ball joints need replacing after only 3 months of owning these control arms
@techmaster4434
@techmaster4434 3 года назад
did you gain any ride height after the install?
@AGuyandHisProjects
@AGuyandHisProjects 3 года назад
I'll ask him!
@tommyweese5697
@tommyweese5697 2 года назад
Won’t gain any height. These are more for travel and not hitting the control arm against the strut
@astridaguayo6589
@astridaguayo6589 Год назад
What grease did you use?
@AGuyandHisProjects
@AGuyandHisProjects Год назад
Shoot I don't remember. I don't remember if the instructions called for grease either. Typically my mentality is sticky and slippery and it works haha
@astridaguayo6589
@astridaguayo6589 Год назад
Thanks for replying! great video btw
@AGuyandHisProjects
@AGuyandHisProjects Год назад
Thanks!
Далее
Rough County Leveling Kit Install Ford F150
12:43
Просмотров 154 тыс.
Before You Buy: F150 Upper Control Arms
5:14
Просмотров 204 тыс.
How to Replace Upper Control Arm 09-14 Ford F-150
18:09
Будни в пекарне. Часть 1
0:59
Просмотров 4,1 млн