2015-2023 Mustang Eibach Sportline Spring Set Installation

Подписаться 247 тыс.

Просмотров 220 тыс.

50% 1

Bill shows you how to install a Set of Four Eibach Sportline Springs on your 2015-2023 Mustang.
Mustang GT:
www.cjponypart...
Mustang Ecoboost:
www.cjponypart...
One issue some people have with the new 2015-2023 Mustang platform is the stance. One way to fix that issue is with a set of lowering springs. The Sportline set from Eibach will give your new Mustang a much more aggressive look as well as improve the handling. These high-quality springs will reduce squat during acceleration, limit nose-dive while braking, and reduce body roll on those hard corners. You will also see a reduction in fender-well clearance, making your Mustang look just as impressive as it performs when you install these versatile new Eibach Sportline Springs.
Installation is fairly straightforward and can be done in an afternoon in your driveway or garage. Once we installed this set on our EcoBoost, paired with a set of aftermarket Niche wheels, the look of our 2015 was a drastic improvement from stock. We saw an inch in the front and an inch and a quarter in the rear.
If you are looking to get rid of that annoying looking wheel gap as well as improve the handling of your 2015-2021 Mustang, than check out this great set of Sportline springs from Eibach.
Check out more Mustang Spring parts from CJ's here:
www.cjponyparts...
Check out more Eibach parts from CJ's here:
www.cjponyparts...
Subscribe to CJ Pony Parts on RU-vid here:
www.youtube.com...

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@martinezandy15 5 лет назад

When she wears yoga pants @9:47

@yahabibi6891 5 лет назад

HAHAHAHAAHAHAAHAHAHAHAHHHAHAHAHah

@RidinONChrome 4 года назад

hahaahah. TRUE

@Youngsoldier93 4 года назад

Lmfaoooo

@th3sh4d0w1234 4 года назад

I have these springs and installed then myself. Was my first time and my 2019 gt pp1 looks awesome. Got the rtr front chin spoiler and the 1inch billett to. Fyi...make sure you get an alignment. Steering wheel was off and shifted to the right. Took it to the dealership and got it aligned. Now its centered and the car drives badass.

@achillestaboy548 4 года назад

Did you torque them down or just did what you think was right?

@Sheepdog416 8 лет назад

Note to those watching this video: The front bump stops are installed incorrectly in this video. Have a look at the other CJ vids for the correct way of installing the front bump stops. Here they are shown upside down.

@mixeymix4173 7 лет назад

Do you think this is critical ? as I installed upside down

@luissandoval1515 4 года назад

Damn you just just fucked over a guy for posting a video pretending you know what you’re doing

@djrickygaz 4 года назад

@@luissandoval1515 Lmao

@coinsagE46m3 3 года назад

Thanks man, caught this comment and after getting to this point in the install on my S550, you're absolutely right.

@BloodPshyco73 3 года назад

Lol yes, I took a peek at the instructions from Eibach and then saw this video and they’re upside down

@DanielTojcic 9 лет назад

Dig your channel man, great clear videos..I'm a VW guy but liking the new mustang a lot, nice to see them modded here

@ginoo722 9 лет назад

What you guys are doing with the video quality is great!

@jamesrusso2265 7 лет назад

Thanks Bill great install video, doing this tomorrow...

@mikeysuperfly1997 5 лет назад

Better install video than American muscle good job. Thanks for info subbed

@cjponyparts 5 лет назад

Thank you! 😎

@AutoYoung 9 лет назад

Hell yeah, that looks great!

@PewpewProfessional 7 лет назад

Can't wait to get mine on this weekend!!

@larrycartee4090 3 года назад

My 18 rear sub frame doesn’t drop nearly enough to get the old one out. Had to remove the rear sway bar and loosen the rear bolts plus completely remove one other arm off the frame just to get it done. Might want to mention using thread locker on those caliper bolts too.

@bunbee2023 3 года назад

Looks great!! 👍🏾👍🏾

@victoroliveira3256 9 лет назад

Great video I love these DIY vid there awesome

@jayzbond007 9 лет назад

I love the orange Mustang! Sexy!

@samsaban9617 9 лет назад

... its red...

@andresmarcano9662 3 года назад

The video is good until I realized you guys didn’t tighten the strut mount top nut twice, you were supposed to tighten after you release the springs. I did the same as in this video and now I have a noise coming from there and when I try to tighten the top nut it just spins. I guess I’ll have to take everything out again.

@KINGKJ2REAL 6 лет назад

I have a performance pack the rear shocks are different i couldn’t get the stock bumpstoks off but they are bigger then the ones that came with the kit so i am going to leave it ... and thanks for not updating the video and letting people know you installed the front bump stocks wrong i already installed them the wrong way now i have to un do it

@razena7365 7 лет назад

I'm missing the eibach dust boot for the front springs, can i re use the stock? or should I contact eibach. Got mine used btw

@MrDance4meh 6 лет назад

RASSASSIN 7 lmk what u ended up doing

@mixeymix4173 7 лет назад

Please edit your video for the front bump stops. They are upside down. Save doing the job twice like me.

@mixeymix4173 7 лет назад

Other than that, very useful, thanks

@Ryan-re7oj 3 года назад

Cool my front bump stops are apparently in upsidedown. Thanks. 6hrs down the tubes.

@440boosted 9 лет назад

Great channel! Can you please add some FI install in the future for any 5.0 mustangs

@balakays550 25 дней назад

am i the only one that cant get the top hat seated correctly? it looks good but doesnt spin freely feels like it gets hung up

@bl4d3runn3rX 7 лет назад

Hi Bill, do you need adjustable control arms with these springs or can you adjust the camber on the mustang without them? How about the shocks, do they have enough travel left or are they bottoming? Are these working with the Ford Perfomance Street Handling Pack shocks? A lot of questions :)

@sleepytimemeditation3618 8 лет назад

do the instructions include what you should torque the bolts and nuts too? it would be nice if you could casually throw those numbers in there during your install vids :) just a thought

@alexseptecal116 3 года назад

I can’t hammer off the screws any suggestions

@JAYSWORLDTV 9 лет назад

I just received my eibach Springs from you guys can't wait to install!!! I have the 20inch wheels on my Stallion

@cactusanal9395 8 лет назад

+JAYSWORLD_ TV what kinda hay do you feed it?

@loscar5oh 7 лет назад

I installed these same springs on my 15' GT and for some reason the right side sits 1/4" higher than the other side. The springs are correctly seated and installed. The only odd thing I noticed was the sub frame on the right side when tightening had a lot more resistance vs the drivers side. Is there something that I could have done wrong?

@marcusd6759 7 лет назад

Loscar5oh Did you figure it out?

@loscar5oh 7 лет назад

Marcus D no not yet unfortunately

@KINGKJ2REAL 6 лет назад

My driver side had more resistance too. But my ride height is fine

@mattquila4039 6 лет назад

I just installed these springs on my 16 mustang GT base model and after installing it there was a noise coming down from below and it makes the cabin noise really loud. Whenever I drive on the freeway and hit those little bumps it goes away for a sec and then when driving straight again it goes back. I checked the clearance of my tires and they were not rubbing at all. Are those noises normal when you install these to our mustang?

@cjponyparts 6 лет назад

NO they should not make any noise. I would go back and make sure the strut nuts are tight along with the sway bar end links, they are the most common causes of noises post install.

@thefitnesslife4988 8 лет назад

So much easier to do with last gens solid rear axle,

@851995STARGATE 8 лет назад

Yea, but the IRS handles so much better

@Prophylatix 9 лет назад

Watching this video reminded me of how tedious it is to remove/replace the rear springs on the Mustang. Do you have an exact drop rate? That looks like a pretty substantial decrease in ride height.

@JFaded 3 года назад

Just did mine on a convertible I had to drop the extra brace too

@4evrsccr 7 лет назад

Hey bill I can't get the lower bolt off the front strut strut. I got one off. The other just won't get loose. Used an enormous breaker bar and it won't budge.

@chrishaugh1655 7 лет назад

Hey Bill, I just went through the information they provide (which is extremely limited) from inside the box. Do you know where I can find the torque specs for the nuts that actually need to be torqued back to spec?

@mikehoncho4948 2 года назад

he just hit them with an impact 🤣

@mikehoncho4948 2 года назад

a few ugga duggas should do it.

@4evrsccr 7 лет назад

Thanks Bill! I am doing this on a jack and jack stands. I will be supporting the IRS with a jack to lower it? I don't really know where to jack up on the IRS? It wasn't really explained in the video? Any tips?

@Zerogivengarage 7 лет назад

Support the irs the same place I put the pole jack, under the spring on the subframe itself, not the control arm.

@drogon2988 3 года назад

I got 20 in. Wheels with 295/35/20 on the rear and 245/40/20 on the front. I could be mixing up the 35 and 40 series part. My point is, I'm afraid I won't have enough room to lower my car this much? Can anyone respond to this with reassurance it'll work or insight if you've already done something similar? Thanks!

@MrJhAam 7 лет назад

Hi Bill, I just has these installed by a shop on my 2016 mustang v6 yesterday. After installation and when driving home I can hear the clanking coming from the rear, and maybe some in the front too on the passenger side. At first I thought it was just my stock springs that I put in my trunk making the sound. But when I got home and emptied the trunk, theres still the clanking sound when going on small bumps. What do you think the problem would be? I called the shop who installed my springs and I was told to come back tomorrow and they will check the problem..

@marcusd6759 7 лет назад

MrJhAam So did you figure out the problem ?

@MrJhAam 7 лет назад

Marcus D Yeah, it was the strut's bolt that was loose. They just tightened it up then problem solved

@ecoli0106 7 лет назад

MrJhAam I have this same problem. Any recommendations? I think i just need to tighten the center nut on the top of the strut

@mrKev_ 4 года назад

Does anyone here have creaking and popping noise from front suspension? I torque everything but the popping noise over small bumps or at low speed is very frustrating.

@2510LV 4 года назад

Did you ever find a fix?

@mrKev_ 4 года назад

@@2510LV No, I showed it to couple mechanics too but no luck yet!

@mrKev_ 4 года назад

@Hilbert Hoppyclaps I got new set from Eibach as warranty but they had same issue too. All I do is cranking up the music. A lot of friends switched to Steeda brand instead.

@mrKev_ 4 года назад

@Hilbert Hoppyclaps yea same problem. The stiffness module on these springs are bad and when sits on housing, they make popping noise.

@mrKev_ 4 года назад

@Hilbert Hoppyclaps also makes noise over bumps. On highspeed your suspension travels less therefore you cant hear it and in low speed on bumpy road you will hear it more

@dreasand2617 8 лет назад

how long would it take to install on a 2015 mustang v6. shops are telling me 7 hrs. that's crazy. I never heard that...is it cause its a new mustang? help please!

@thestang8289 8 лет назад

Like Bill says it should only take 2-3 hours Did you ever take into account that maybe the shop will be busy when you take it in for install?

@dreasand2617 8 лет назад

Thanks bro I knew that for sure! Thought I was bugging!

@thestang8289 8 лет назад

Drea Gill Yeah man, no problem. So when you getting them installed lol

@SIK50H 3 года назад

I just installed theses springs over the weekend But my passenger rear knocks a little bit Is that normal ? Or ? Idk what it issue could be I took everything off and reinstall and yeah same issue

@dubstepbutt 7 лет назад

Hey Bill I have a 14 Gt and I'm running 305-35-20 in the back with a 50mm offset and have a slight bit of poke from the outside of the fender (maybe 5mm) I want to run a drop and was wondering if I run the BMR springs from CJ Pony with the 1.5 inch drop will I be in any danger of rubbing or wrinkling the fender?

@ahssasmajnon123 9 лет назад

hi bill, do you recommend these springs with the NITTO Extreme Performance NT05R Drag Radial - 315/35-20 ? are they going to fit ? or do you recommend the pro kit ? what do think the highest tier size i can go with these ? thanks .. Ali !

@segua 9 лет назад

How do these compare to the performance pack springs

@chrishaugh1655 8 лет назад

I'm going to purchase these for my new GT, is the drop rate the same, lower, or higher?

@tonyh7355 8 лет назад

Any reason as to why you installed the front bumpstops flat side down? or does it matter?

@Zerogivengarage 8 лет назад

It was a mistake on my part, flat side up is the correct way.

@mixeymix4173 7 лет назад

Is it critical? I installed as per video

@ronaldo_alldaychannel1145 5 лет назад

@@Zerogivengarage thanks for getting back to us!!

@bryanmitchell4233 3 года назад

I installed these and I hear bumping front the front driver side. Anyone know how to fix that?

@SIK50H 3 года назад

Mine is in the rear

@AAhshitsun 5 лет назад

Without the correct shocks and struts putting sport lines in a car makes it look good and makes it ride and handle terrible at high-speed

@blu3.7mustang19 6 лет назад

Spring compressor gets in the way 😡

@anthonyortega5157 7 лет назад

If i have 1 inch spacers all around and use these springs, will the wheels make contact with the fenders?

@djdev3077 2 года назад

Do you recommend a bump steer kit after lowering the car that low?????

@mohammedal_dhaheri2727 7 лет назад

Hello bell How many inches are those ?? Are those 1 3/4 fronts And 2 1/4 rears !!??

@sergiosanchez6910 6 лет назад

What would you recomend for the camber, caster camber plates or just the bolts?

@jimmycivic215 7 лет назад

hey how you doing bill how low is the car what's the inches on a car is it a 1.2 or a 1.5 or 2.0 inches

@jjstevenz 3 года назад

when you said two fronts those are actually the rears the skinny ones go on the back, its weird

@Spurrr 2 года назад

Do yall have many scraping problems with the sportlines? Im on 19s

@t5.0ny 3 года назад

How long would these last with the stock struts and shocks?

@2004SANTE 9 лет назад

Did you need caster camber plates to get the front back in alignment?

@MrBBoy333 9 лет назад

If I install these springs MYSELF on my 2015 gt will it void the warranty?

@4evrsccr 7 лет назад

I can't seem to see the placement. Can u describe iy

@docufiction 8 лет назад

What are the torque specs? You really recommend using the stock stroud?

@Camj27 Год назад

What’s the brand of the spring compressor you used?

@5abivt 8 лет назад

instead of lowering the subframe could you not disconnect the sway bar and lower control arm bolt at the outer end and drop the control arm to get the spring out?

@Missionmtman 8 лет назад

Yes you can do it that way. Probably easier that way if you are doing this at your house with a jack and jack stands. Clock your bushings too!

@Gatorsrok 9 лет назад

Considering buying these springs.... How bad was the alignment out when you had it on the alignment machine?? figured lowering the subframe might cause some issues for re-aligning.

@Zerogivengarage 9 лет назад

Gatorsrok It wasn't bad at all, lowering one side at a time keeps it pretty close to spec.

@ricardonunez4373 6 лет назад

I have bumping noise from my rear passenger area. Any suggestions?

@2510LV 4 года назад

Did you ever figure out what was wrong?

@Iphonenick84 4 года назад

Anybody ever figure this out?

@D1G1TALSYNAPS3 9 лет назад

What do you mean it's not 50 states legal? What happened?

@ginicholas4322 8 лет назад

Could you use the stock bump stops on these springs? Well, really is there a difference between the stock bumpstops and the eibach ones? I don't particularly have the eibach bump stops at this moment.

@Zerogivengarage 8 лет назад

+GI Nicholas I would cut them down if you don't have the correct ones, you will hit the stock ones with the Sportlines.

@ginicholas4322 8 лет назад

Okay, thanks good to know!

@jasonquiroz3899 2 года назад

@@Zerogivengarage how much should you cut it down? From the top or bottom?

@queefreak666 Год назад

Where is everybody placing the floor jacks on the rear. Differential or elsewhere? Little nervous about damage to the diff.

@cjponyparts Год назад

I usually jack the car up by the diff and put stands on the subframe.

@darkanswer 8 лет назад

i dont have my car yet but i already bought the springs and im intrested in those wheels aswel but they look like a tide fit dont u have any problem that the tire hit the boddy when driving

@Zerogivengarage 8 лет назад

+Jeffrey Verhulst none at all

@nicholasarmstrong8225 9 лет назад

Is there a listing somewhere for the ft/lb settings for all these nuts?

@yp3905 7 лет назад

www.mustang6g.com/forums/showthread.php?t=47084

@JCTiggs1 6 лет назад

Yash Patel Great link and thanks. I think I'm going to need a bigger torque wrench.. 🤔 Front spindle/hub nut: 251 ft/lbs.

@vipraz119 7 лет назад

Do you recommend an alignment after this installation?

@razena7365 7 лет назад

JDMUSCLE P I heard people say, you have to drive them around to Let them settle first, and get an alignment after a week or so

@burkcs 9 лет назад

The rear of the car looks to sag lower than the front. I think it needs more of a rake...

@speen5592 9 месяцев назад

Attitude adjustment… you mean an…altitude adjustment…?

@gigoeste 4 года назад

One of the spline bolts on the strut assembly won't come out no matter how hard I hit it... What to do??

@jassamalewi6215 3 года назад

use a ball join remover or like a brake piston pusher

@quonyoung1280 Год назад

Yea man that bump stop is lol🤣backwards lol thats just funny to me man how you just kinda said oh whatever lol and just put it back together lol🤣i dont think it makes that much difference though.😅

@adrianelias7538 6 лет назад

What performance struts do you guys recommend ? I just recently bought a 18 GT performance pack and want to put sportline eibachs and wanted to know if i need to upgrade the struts as well?

@cjponyparts 6 лет назад

As long as you do not have Magneride any of the 15-17 struts will fit the 2018 Mustang. I am a fan of the Konis with the sportlines.

@Cerebrus1312 8 лет назад

Hi Bill, Got my springs and looking to do the install over winter. You say we need to use a drill bit to open up the rear bump stop a bit more so it fits. What size of drill bit did you use? I dont want to use something too small or too big and then ruin the bump stop.

@Zerogivengarage 8 лет назад

+Kereshen Naidoo its very hard to ruin, you want something large enough to just remove a little material.

@Cerebrus1312 8 лет назад

Perfect thanks for the info!

@4evrsccr 7 лет назад

Is it not dangerous to pull out the rear spring without compressing it? I'm confused why he didn't compress it.

@Zerogivengarage 7 лет назад

When you lower the subframe the spring decompresses and pretty much falls out.

@sleepytimemeditation3618 8 лет назад

hey Bill, mine didn't come with the black padding that these on the video have. they also didn't come with the bump stop or the new dust boot. can I still install them with out these or should I wait.

@thestang8289 8 лет назад

I would contact , eibach first, if not Then I'd cut the bumpstops and use the stock dustboot

@ImgCrisp 3 года назад

How long do these take to settle?

@WarYaht 8 лет назад

just got my springs looking to get wheels next and I wanna go 295 30 19 all the way around do you know if the front will rub?

@KINGKJ2REAL 6 лет назад

that 1 guy from that 1 place front will not rub

@renegarcia7591 6 лет назад

What kind of tires did it have

@maxzhuk3412 4 года назад

Do you have to drop the subframe or can you just compress the spring and pull it out like that?

@cjponyparts 4 года назад

Dropping the subframe is the easiest way to do it, there is very little room to get a compressor in there.

@FranciscoSantos-cr3wn 4 года назад

My daily drive on my mustang Gt with stock wheels is mostly on flat road until I get to work that I go over 3 speeds bumps would I have any issues with these sport line spring?

@cjponyparts 4 года назад

They will be fine with normal size speed bumps. Take them at an angle to be safe.

@XBLJohnstOnse 6 лет назад

Do you have a link to those rims?

@JAYSWORLDTV 9 лет назад

bill I am having a difficult time hammering the two bolts after removing the rotar any advice this isn't as easy as your video completely stuck please respond ASAP need this done by tomorrow?????

@Zerogivengarage 9 лет назад

+JAYSWORLD_ TV Some cars they come out easily, others you really have to hit to get them to budge. Unfortunately there is no trick to this.

@JAYSWORLDTV 9 лет назад

+Bill Tumas thanks Bill for the reply and yes your right def. took a while but got them out

@JAYSWORLDTV 9 лет назад

+Bill Tumas thanks Bill for the reply and yes your right def. took a while but got them out

@JAYSWORLDTV 9 лет назад

+Bill Tumas thanks Bill for the reply and yes your right def. took a while but got them out

@austincundiff758 4 года назад

If I am using 25mm Eibach spacers front and back. Will these springs cause rubbing?

@cjponyparts 4 года назад

With stock wheels it will be ok.

@jaket4919 6 лет назад

So i put the bump stop in the way you showed do i need to take it all back apart?

@jaket4919 6 лет назад

I kinda need to know I’ve been driving on it awhile

@christianwatson3817 4 года назад

Do you have to replace the bump stops in the rear or can I leave the stock ones in?

@cjponyparts 4 года назад

I would suggest replacing them or cutting them down.

@alllallan 4 года назад

Idk what happened but at 3:51 when I tried to hammer them out they wouldn’t even move or budge I tried lifting the whole thing with a jack to take pressure off and nothing worked even wd40

@anthonyburke578 4 года назад

Just did them 30 mins ago .. those bolts were a bitch to get out bro

@balakays550 25 дней назад

i had to guy buy a 4lb sledge and it worked like a charm

@bedweljp 4 года назад

Where do I find all the torque settings to reassemble?

@KingB015 3 года назад

Did you ever find out ?

@fernandizo 7 лет назад

hey man..great vids.. I just bought a 2015 S550 5.0 manual. it's a used base model with about 3k miles, came with Roush axle back and Roush cold air.. I need this car to handle like a track car. but I don't want to spend 6-7k$. I'm leaning sportline for the dual spring rates. but I need this car to sit flat to get the grip on the corners. I want to run at least sticky 305-315.. what do I need to accomplish this? also my bro is talking shit with his 2015 z28.. I need to keep up with his fancy ass..do I go sportlines and camber plates and bushings? I need grip, tightness, low body roll and low center of gravity, and most importantly not to jack up my drivetrain..I'm lost here. I need some advice from a pro..can you help? do you need a car to demo for this purpose? I got you. Will pay what u need, live in southern Ohio.

@Zerogivengarage 7 лет назад

The Eibach sportlines with the sway bar kit will give you what you are looking for on a budget. Depending on wheel fitment a 305 will work but anything larger will require increased camber in the rear.

@fernandizo 7 лет назад

Bill Tumas will the sportline springs require any other modifications to keep the tires sitting flat on the ground(even tire wear)??.. Ive heard of issues with too much negative camber in the front's (maybe rear). also if I'm putting 305s what offset, rim width, and tire height do I need in 19" rims to tuck under wheelwell and still be flush?? . what's the advantage of going staggered vs a square setup?? will thinner front tires still grip on curves?? I've heard the front wheels needs -5mm offset compared to rear to sit fully square.. is this true?? thanks for taking the time to answer my questions.

@keeganlee98 9 лет назад

Once I put on the new springs, do I need to get an alignment??

@Zerogivengarage 9 лет назад

Ford.Car.Reviews We always suggest getting an alignment when changing ride height

@tomfunk2066 8 лет назад

that front spring that is on the table is not the one that is installed on the strut.....????????

@Zerogivengarage 8 лет назад

+Tom Funk I am not sure what you are asking? the spring I showed is the one I installed.

@tomfunk2066 8 лет назад

+Bill Tumas Have you installed the kit for the GT?

@Zerogivengarage 8 лет назад

+Tom Funk not on video but we have installed sportlines on GTs

@MrThabest101 7 лет назад

Are those 18s cause I'm about 20s and try to lower it down. Would hurt fenders

@Zerogivengarage 7 лет назад

These are 20x10

@k-theoryproductions319 7 лет назад

What size wheels did you have on the car for this video ? 20in ?

@Zerogivengarage 7 лет назад

20x10 Niche Vicenza on all four corners.

@dylanknows3147 7 лет назад

I just did this instal on my 15 gt pp and the stock bump stop wouldn't come off because the top of the shock where you unscrew that nut has a lip making it impossible to get the bump stop off. Is it ok to leave the stock bump stop on?

@805luis805 7 лет назад

Dylan Larson did you have any problems after u did that ? Cause same happen to me

@dylanknows3147 7 лет назад

luis Velazquez no problems yet. From reading online people were saying the only thing that could potentially go wrong is that you can bottom out on the bumpstop. Which idk how that's possible but even if it is I'd rather bottom out on that bump stop then the end of the strut. Drive about 500 miles and haven't had anything like that or anything else happen.

@805luis805 7 лет назад

Dylan Larson alright cool thanks ! I been driving mine for the last 2 days as well and no problems