2016-2021 Tacoma Body Armor 4x4 PRO-Series Rear Bumper Review & Install 

Shop this Body Armor 4x4 Rear Bumper: terrain.jp/2YYz60h 🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw

Great install video but it sure would have helped to see how to install the backup sensors too

An excellent bumper for the price point and better than stock for sure! I just helped my son install one on his rig last weekend. Very easy to install easy to follow instructions, especially if you have the factory hitch assy installed. A couple of tips: 1: pull the wire harnes through the license plate light holes, then plug lights into the harnes and insert lights into the holes. 2.The holes for the license plate lights and the plug for the trailer lights are a bit big, allowing for quite a bit of "wiggle" room. To keep the plug and the lights from vibrating, we used some black rtv silicone on the back of them before inserting into the holes. Worked perfectly, once dried the plug and lights feel solid. 3.The wire harness for the trailer lights is too short and no longer reaches once this bumper is installed. Looking for an extension now, otherwise we will be extending the wires soon.

Do you make a bumper that DOES NOT have the square holes for the lights? I DO NOT want the rear lights.

18:50 The hitch plug is not secured. it popped out.

I now know why there isn't a video install on the bumper and how to install the rear sensors. It's a complete joke to install them. Plan on double the time from this videos suggested time frame.

TWO IMPORTANT TIPS: 1. if you do have the parking sensors, put them in the bumper BEFORE installing the bumper. 2. do a temporary removal of the tailgate to tighten the bolts that are difficult to reach.

If the truck comes with blind spot monitors what can be done with those. This truck did not seem to have them and did not see the brackets for them?

They failed in one little detail: they need to cut out the two hole for the factory license plate lights, for the entire assembly, no just the lights. The license plate lights will be shining upwards.

Just installed this bumper on a 2017 tacoma sport and the wire for the trailer connector doesn't reach I had to do some cutting and be careful with the back up sensor because they are very easy to break oh and the license plate lights are very loose and in the video they didn't move them because they also know 😀

2 hours is not accurate, I’m 1.5 hours in and the license plate lights not coming as shown in the video

Just a heads-up, on the license plate install. You can also use plastic mollies and the old, or new hardware can be used. Thank you!

Can you do a video on hooking up lights.

Mine also arrived scratched up, gash on one of the hooks, the passenger side is a huge gap and not flush with the body compared to the light. Tried to realign but bolt holes do not line up or ability to set back farther. Disappointed as well with the large gap between the tailgate and bumper. No phone number to reach BodyArmor for support on these design flaws or bad batch of product

Thanks for this video, just curious if anyone else has an issue with the wiring harness not long enough to fit on the new bumper? Edit: for everyone asking it's Curt manufacturing 55384 wiring harness that fits.

How many square spacers are needed to level out the bumper ?

some of the welds on that bumper you are installing look like crap.

I used this video to remove my bumper for some repair work.

Can you add 2-3 inches on the width on the back bumper?

What about my dear sensors cuz the way you removed the bumper it removes all the wires for the sensors

What a load of shit. No video for the sensors. The slots for the sensors are too small. The holes need to be drilled out better. The trailer plug sticks out too far and the harness has to be pulled tight to make it plug into the outlet. No mention that I saw about BSM not working in the product description.At least it looks good and is durable...

I just bought this bumper and waiting for the weekend to install. I noticed the trailer plug almost fell out while you were installing your license plate. Is this a problem with this bumper that you didn't want to address or no?? To thick for the retainer clips maybe? There is nothing more annoying than seeing a problem that it appears the seller is trying to avoid talking about.

Someone know where I can find the name of the pieces

great job! and only one broken nail! :)

anyone happen to know how much this weighs? it seems really good for the price but just would like to know the weight of it for my 2013 tacoma

Where can I buy the bumpers for my Tacoma 2019?

would this bumper work if the truck has Blind Spot

Very informative video, much appreciated "liked" ... already subscribed.

Would you be able to reach those forward allen bolts if you take the tailgate off ?

That looks sharp!

These strong bumpers are DEADLY on both ends. ! I want one for my new Tacoma but don't forget all vehicles are designed to crumble for our safety !