2016-Current Toyota Tacoma Low Profile Ditch Light Combo Installation 

Hope you enjoy the product!

Right on! Shoot us photo when you get it all rigged up!

They are so awesome! Let us know if you have any other questions feel free to contact us. info@caliraisedled.com (888)-385-5036

Black to black Green to white Both reds to blue

@@jugrnot8 thank you!!!! 🙌🏼

hey man did you figure out the wiring? I haven't recieved mine yet, so kind of want to have an idea. The OEM Switches they sell are usually 4 wires (red, red, black and green), but not sure about the switch that comes with ditch lights.

Check out their video for the hidden front bumper light bar install. They go over it there. Looks really easy, so I just ordered all the OEM switches for my lighting setup.

Phil Kwon I did figure out; it was easier than I though:)

PB blaster and a longer ratchet

Hey man did you figure it out? I am getting my package soon, so want to get ready. I did some wiring with OEM switch and auxbeam light bar and wired both reds (OEM Switch) to red (auxbeam), black to black and green(OEM Switch) to yellow (auxbeam). But here I have no idea. Thanks!

Same question here, did you find out how to wire?

Yes the brackets are almost identical.

Brandon it will affect the gap between the fender and hood but does hug the hood a little better and gets the light a bit higher.

Please cotnact our customer service (888)-385-5036 or info@caliraisedled.com

Please send out customer service pictures of you can send them to info@caliraisedled.com

Ever figure this out? Mines always on also.

For switch light, you need to use add-a-circuit with one of two red/yellow(one that is next to black wire) wire and tap it into one of many ignition power source in the fuse box. There are two options depends on how you want it to function. Option#1: Use Tail light fuse slot if you want the switch light to be on only when parking lights are on. The switch light will be turned off during daytime drive without parking lights on. Option#2: Use IGN2 fuse slot if you want the switch light to be on all the time as long as start button is pressed/key is turned. I use this option as blue switch light looks cool even during daytime. And of course ditch light turns on anytime regardless of switch light. You don't have to use same exact fuse slots I mentioned as there are many more to tap into. I've been running five add-a-circuit in the fuse box for years without any problem.

You can just use wire connectors

Maxx Powell Hey thanks Maxx!

Addafuse

Yes it is the same.

Andrew Goodwin the left to right is done by the mounting bolt for the light it self. Up and down is usually done by an included mount with the LED.

Might take it to a professional! Good luck.

@@CaliRaisedLED Yes I will at my friend's shop. Thanks you can't wait to put them on.

Did you ever get your bolts off. I have one that will not come off for the life of me. Any tips?

@@chadweddle9191 I never got around to try and getting them off, I've been so busy with work it's nuts but yeah it's locked on there good probably have to take it to a pro

Tarek Taher they can hold any brand led light.

Yes we do. please visit our website.

Sorry the 4th gen 4runner

Yes they are roughly 1-3/4" Lower

Low profile also means more glare from hood

Hey Alex, We skipped this part because its only one bolt and nut that holds the bracket to the pod. If you would need help with this part of the installation, please feel free to reach out to our customer service!

Hello, When you click the product you have the option to customize the kit! Customizing the kit comes with several different options. You can check it out for yourself below by clicking the link! caliraisedled.com/products/2016-2021-toyota-tacoma-ditch-light-brackets-kit

Please email info@caliraisedled.com and we can help out :)