2019 Dodge Challenger 1320 STO N SHO Front License Plate Mount Installation:

Подписаться 13 тыс.

Просмотров 16 тыс.

50% 1

Do you need to mount a front license plate from to your Dodge Challenger but you don't want holes drilled in your bumper? In this video, I show you how to install a Sto N Sho license plate bracket on our long term 2019 Dodge Challenger R/T Scat Pack 1320.
The Sto N Sho detachable license plate mount bolts under the front bumper of the Dodge Challenger and is a two piece unit that allows you to simply pull a pin and pull your front plate off for a clean look for car shows and the like. To be legal for the road just simply slide the bracket back on to the mount. Due to our car having adaptive cruise we had to mount the plate offset so it doesn't interfere with the adaptive cruise control sensor, but it's definitely better than drilling holes in the bumper in my opinion.
STO N SHO Plate mount 2015-2019 Challengers with adaptive cruise: amzn.to/2RNTnS6
STO N SHO Plate mount 2015-2019 Challengers without adaptive cruise:
amzn.to/2RJY6nR
STO N SHO Plate mount 2015-2019 Challenger HELLCAT, DEMON and R/T Scat Pack widebody:
amzn.to/2Xcci9W
For more information on our long-term 2019 Dodge Challenger R/T Scat Pack 1320, check out www.moparinside...
#Dodge #Challenger1320 #MoparInsiders

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@MoparInsiders 5 лет назад

Links to purchase the STO N SHO license plate holder from Amazon are in the video description.

@krammit89 Год назад

Thanks for the tutorial! Gonna try mounting this to my new Chrysler 300c for this year! Love the color of your car!

@2GuysTalkingPodcastNetwork 2 года назад

Cool - what are the two indentations on the front of the front bumper there? Are those the "drill here to make holes in your bumper" holes? Just got into a GT, and will need to find an option. Looks like the format you've got here (that would mount on a splitter) won't work in my case. Will keep looking. Great, to-the-point video. Cheers!

@chuckiegsdodgegarage7422 5 лет назад

Its too low, you will scrape and bend the plate on going up a low ramp.

@ssealabs 5 лет назад

Here in Colorado the bottom edge of the plate must be >12" from pavement and the face must be perpendicular to pavement (throwing it on the dash won't work). There may be similar rules in other states.

@keepout7439 5 лет назад

Looks funny off to one side but, I get it, what's the price and best place to get it??

@392JeffGordon 7 месяцев назад

cool , i see many cars here in texas not really riding witht he front plates, i guess there kinda more leniant about it here

@dasuberpanda 4 месяца назад

Same in MO, it really is luck of the draw when a cop sees it. And the area

@jeffreyerickson3050 4 года назад

Curious......what was your preference to place the plate on the passenger side of the front end? I plan to mount my on the driver side (the business side), wondered why people pick the passenger side?

@mikerock148 Год назад

So copa cant see it as easily when they drive by

@bacon_bro2062 7 месяцев назад

I have to put it in the middle because i would go insane if it wasnt in the center because i think its ugly if its offset

@SNeal5966 4 года назад

are the bolts that are used to mount the plate to the sto n sho stainless (the ones that come with it)? if not I will have to buy stainless after it comes in I guess....

@DCGEMINI202 4 года назад

What about if you have a extended front splitter? Can you still use this?

@gerrygamache5677 5 лет назад

Should have had the driving up the ramps, it's the hardest part or registered a car in Alberta.

@marcturk4410 5 лет назад

I would use stickers numbers as long as the numbers match the rear plate what the big deal police have to follow to read your plates ,and hit you head on to read the front one ,plus corvettes ran around for years with a non plate that read USA ONE never seen them get pulled over

@TheSterlingArcher16 2 года назад

It’s outrageous that manufacturers don’t include a front license mounting bracket that doesn’t require DRILLING THROUGH THE FROMT BUMPER. Ridiculous.

@stevepryor5656 5 лет назад

We need a front plate in Ohio (at least until July 2020) so I got the Sto n Sho as well (for my widebody Scat) but I got the "Upper Mount" which goes on the underneath of the bumper in the center just above the adaptive cruise sensor. Holes are underneath so cant see those and the plate is in the center and thus not awkwardly off set. Also, when you mount it to the splitter the bracket hangs below it and makes it more likely to scrape on driveways etc. Check out the link below and you can see what it looks like. bigmikesperformanceparts.com/2015-2019-dodge-challenger-hellcat-and-demon-2019-wide-body-scat-pack-upper-mount-sns1e/

@MoparInsiders 5 лет назад

That's the one I originally ordered, it only works on the hellcat/demon/widebody scat bumper.

@stevepryor5656 5 лет назад

also easier access for the initial install and for when you want to remove it at car shows etc.

@stevepryor5656 5 лет назад

Oh ok. I didn't notice that. Hopefully they will get rid of the front plate rule for you as well sometime soon!:)