2019 Honda Monkey Ohlins Suspension/Rear Shocks Upgrade Install (1st Monkey Mod)

Подписаться 264 тыс.

Просмотров 63 тыс.

50% 1

‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoff...
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com...
Products used in video: (some items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Ohlins rear shocks for Honda Monkey: amzn.to/3Dcm5Fy
Honda Monkey 125 Workshop manual: ebay.us/tqHhD1
Torque Wrench Used:amzn.to/3CQaHNU
Tool/Wretch Set Used: amzn.to/3VzgQXs
🇦🇺 Australia Links:
Ohlins rear shocks for Honda Monkey:
Honda Monkey 125 Workshop manual: ebay.us/Ptn9qt
Torque Wrench Used: amzn.to/3MOf01a
Tool/Wretch Set Used: amzn.to/3CTUk3g
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
Mnnthbx RU-vid Channel: / mnnthbx
🎧 Music tracks in order of play:
Morning Mist by Quincas Moreira
#hondamonkey125 #ohlins #carcraftautodetailing

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@leeflory1716 2 года назад

850$ is a hard pill to swallow, I love ohlins but at that level I’m not sure…

@madmax3897 3 года назад

That’s a lot money to put into shocks for a mini bike.

@RedFox-i8i 5 лет назад

Fantastic explanation. I can appreciate the time it would have taken to produce a video of this quality. I wasn't sure how to go about doing this install, as I never have done suspension changes before but your video has given me the confidence to have a go! Cheers

@r56mini 2 года назад

Very helpful! Thank you! Subbed for Monkey content.

@Denver1976Man Год назад

Nice. $800 USD is a lot for most. Great Video

@thetraindriver01 5 лет назад

A great instructional install vid Sandro, thanks. It’s nice to see your partner in a vid again, plus helping you out in the process, keep up the good work mate 👍👍👍👍

@toddstubblefield7938 3 года назад

My shocks have arrived from Hard Racing. Watching your video for a third time before I do my swap. Thanks for a great video

@ratscoot 5 лет назад

nice, as a next step get a Yoshimura rear fender eliminator Kit .

@heckler3119 5 лет назад

I want some Olin's shocks for my Honda CT110!

@VINCENT-2002 4 года назад

Do you even wrench bro ;) (jk) your garage is super clean. Nice video

@ahmedmustafa8099 4 года назад

I love so much honda monkey

@GrupoSentenciadeWKGN 2 года назад

Do you think these shocks will work for a 2022 Honda Super Cub? I'm like 295lbs and need something that works and feels better on the road.

@CarCraftAutoDetailing 2 года назад

The load weight won’t be an issue, it’s really just whether the length and diameter of the shocks to fit the Cub is the same, which I don’t know and you’d have to research.

@GrupoSentenciadeWKGN 2 года назад

@@CarCraftAutoDetailing thank you

@TheOkayOutdoorsman 4 года назад

So cool seeing a bike like this with hydro brakes. Always wanted to do it to mine

@barryo8694 5 лет назад

Too many ads

@johnmackay5784 4 года назад

Might of been easier to fit if you backed off the preload a bit?

@Hunter-zf7ms 5 лет назад

When are we going for a ride Cheers Leo

@sbrick9589 5 лет назад

its not detailing but its a cool bike and the vid is to a high sanded, well done

@wymotome Год назад

What comp/rebound changes did you end up making? Also, im not 100% positive on how to measure the preload setting for this setup but im pretty sure that the 200mm ohlins spring needs to measure 193mm once on the shock and/or bike (hence their recommended 7mm). Also, i had issues with the stiff slrings and installation as well (ohlins being too long). Dont seat the top hole all the way on the bike mounting point (just so that the bolt is flush with the end of the hole) and the bottom goes on easier with only a bit of pulling up on the seat.

@shwagondawheels 4 года назад

The stock shocks were definitely on the lowest preload settings. Upping that may have helped the originals with you weigh. But the ohlins are the way to go!

@ekimandersom7053 2 года назад

The stock have no pre load setting.

@chadrandolph9874 5 лет назад

I want a bike now! Lol Nice video Sandro

@nataliequirke1628 5 лет назад

thank you great help :)

@rogercrier 5 лет назад

I’ve read the instructions, and regarding spring pre-load, I take it they want you to give the 200 mm long spring 7 mm of compression to a fitted length of 193?

@tizianoboniforti2710 4 года назад

So interesting... ciao..

@grindsbo 4 года назад

It's the ugliest airfilter box ever..could have been under the seat maybe??

@rainerwolf6319 Год назад

Are those öhlins Shocks also available for the new Dax ?

@CarCraftAutoDetailing Год назад

Not sure, the new Dax is unfortunately not coming to Australia so I don’t have much info on it.

@rainerwolf6319 Год назад

@@CarCraftAutoDetailing thanks for the quick response

@stevelewis7207 5 лет назад

Your videos on the Honda Monkey are exemplary Sandro. Thank you. Please keep them coming. I’d be particularly interested to hear some more of your thoughts on whether / how the shocks improve the ride, as they’re a substantial investment - certainly here in the UK. They seem to only be available from the States with a substantial freight cost. Just a heads up on the part number markings on the springs. The 2318 and 2918 on yours are simply the week number and year of manufacture

@rogercrier 5 лет назад

Steve, I’m in the U.K. also, and I have just fitted these Chinese copy’s !! They look very well made indeed, for £100. Will test them later, but the compression damper knob is totally fake, so not holding out much hope for the rebound knob! The spring is stronger and it has pre load adjustment so that will be fine, I’m not doing WSB🤣 www.ebay.co.uk/itm/For-Honda-Monkey-Z125-2018-2019-Motor-Shock-Absorber-Suspension-Damper-320-340mm-/163596744395

@rogercrier 5 лет назад

I have given it a thrash down some country roads to test my new “NOHLINS” and they are fine. I am going to whip the spring off one of them to check if turning the lower knob changes the damping.

@rogercrier 5 лет назад

Good news! The rebound damping adjusters is real,and works, so they must have cloned the cheaper version that has no compression damping adjustment, and then just added a cosmetic one! They are very well made and I am not disappointed.

@stevelewis7207 5 лет назад

Cheers Roger. It’s great to hear from a fellow Monkey fan. Thanks for your excellent feedback - it’s much appreciated. I might be heading down the same eBay route, from what you’re saying.

@rogercrier 5 лет назад

I’m in Sutton Coldfield if your nearby and want to take a look at the shocks!