2020 Drift Supra CAD Designed Roll Cage Install and Fabrication

Подписаться 645 тыс.

Просмотров 2,2 млн

50% 1

This is Step 2: Fabrication of the safety cage and chassis components.
*Subscribe to be notified when the next videos are released.
Step 1, Teardown: • Supra Complete Teardow...
Step 3, The install: • 2020 Drift Supra Powde...
...and Step 4, the dyno test: • 2020 Supra Drift Build...
Full engine build here:
Supra Engine Teardown: • 2020 Supra B58 Engine ...
Engine Build Playlist: ru-vid.com?list...
T-Shirt and Titanium keychains: papadakisracing.com/
FOLLOW ME:
/ stephpapadakis
****
More drift team videos:
• Front Wheel Drive to RWD Conversion: • Drift Car Build FWD Co...
• 1007 HP dyno pull: • Dyno Toyota Corolla RW...
• 1000 Horsepower Engine Teardown: • 1000 Horsepower 4 Cyli...
****
ABOUT PAPADAKIS RACING:
The Papadakis Racing team began drifting in 2004 and is the most winning team in Formula Drift history, earning the 2015 title with driver Fredric Aasbo, as well as backto back championship titles with driver Tanner Foust in 2007 and 2008. The Rockstar Energy Drink / Nexen Tire Toyota Corolla Hatchback is the latest competition build from the Hawthorne, California, based team.
Team owner Stephan Papadakis is a legend of sport compact racing who began building his reputation in the 1990s with the first front-wheel drive, tube-chassis drag car in the U.S. The team earned multiple records and championships in the discipline, turning in elapsed times and trap speeds previously thought unattainable in front-drive drag cars. Papadakis' successes in front-wheel drive were matched by his efforts in rear-wheel drive when he campaigned a Honda Civic that became just the fifth car to join the NHRA's Sport Compact 200 MPH club

Авто/Мото

Опубликовано:

3 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@flyboy3d 4 года назад

I love this guy's videos. Always straight to the point of exactly what needs to be said and presented

@stashtrey1 4 года назад

He's the absolute best. Fire content. Just wish his vids were 30+ minutes....10 is just a cock tease!

@carlcomputer9686 4 года назад

Most people do this much information in three or four times the episodes

@Session2 4 года назад

It's great content but I wish the video was longer. Would like much more detail on each section of the build. He talks pretty quick too so it feels rushed watching it. It feels like a teaser for the proper video.

@eiriksjon8656 4 года назад

Couldn`t agree more

@TAOMMANN 4 года назад

Carl Computer yeah it’s fucking annoying. Hate skipping through videos.

@cheeseyl67 4 года назад

It blows my mind how they made a roll cage without laying a hand or seeing the car. Love your work 👍

@hbudiman14 4 года назад

What do you mean. They already 3d scanned the inside of the car

@MarkOfA 4 года назад

David C that’s exactly what he means.

@vitaminb4869 4 года назад

It's all designed and measured with computers. No one is doing anything manually by hand and tape measure.

@Johnny-tq9no 4 года назад

Dude what century are you living in I did this in high school 5 years ago in inventor??? I was 16 lol

@ChuckBeefOG 4 года назад

‘How to turn a $4,000 rollcage into a $30,000 rollcage.’

@ArunPradeepMusic 4 года назад

What i love about this channel is that they get straight to the point without any BS...

@ChrisKsan 4 года назад

No music, no lens glare, no personal completely unrelated vlogging bullshit, no nonsense. Straight to the point, always on point. Beautiful!! And thank you!

@stashtrey1 4 года назад

Damn!! Wish this was 50 minutes longer!!! Papadakis always has the BEST content. This build looks amazing. Hope we will see more soon!! A+++

@pkvillager 4 года назад

THIS!

@RayJr-wp5yh 4 года назад

me tooooooooooo

@Chris-yy7qc 4 года назад

Jep... A shame this video is only 10 mins long.

@chrismartin6544 4 года назад

I couldn’t agree more lots of nice semi tech stuff but not so much that it gets boring.

@CmgDeadman 4 года назад

Hell yeah !

@user-ls9ff4cu9x 4 года назад

Never have i ever clicked so fast

@daldrete01 4 года назад

fastest click in the west

@MrJermbob 4 года назад

fastest click in new zealand

@user-ls9ff4cu9x 4 года назад

@@daldrete01 from the east too

@Starkesea 4 года назад

IN SEATTLE AND 9:39, have work at 7:30 and SAMEEE!!!

@ilovetotones1 4 года назад

For real. I kept getting older videos popping up and I'd get all excited for nothing

@LMSCa18det 4 года назад

As a mechanical engineer, i truly love to see the CAD design and the assembly of this project. Thanks you to show us all the bits.

@firelizard2 4 года назад

This is one of my all-time favourite build series. Thank you Team Papadakis for even bothering to take the time to record all this work when you're surely very busy, and double thank you for the concise and informative narration that goes along with it. This is the "How It's Made" car fans needed!

@franz5036 4 года назад

The quality of their work is insane! Also the way he explains things... I’d watch if he made a video on how he makes a sandwich or how to use a coffee machine.

@DuraStop 4 года назад

it makes you that stupid that you dont know how to make yourself a sandwich or coffee?

@typer1911 4 года назад

Hell if he made an hour long video on which leg he puts his pants on first in the morning id watch the whole thing.

@franz5036 4 года назад

DuraStop you must be a delight to be around in real life.

@DuraStop 4 года назад

@@franz5036 only idiot doubt themselves

@JagUriel 4 года назад

Can't wait to see this, seems like this is going to be the truest representation of what a modified 2020 Supra can be! Thanks for the content Guys!!!

@johncuervo3019 4 года назад

It's really no longer a supra

@bobstarr 4 года назад

It is one of the best B58 stories on the planet

@gabrielsalim2071 4 года назад

@@johncuervo3019 it's still a supra

@johncuervo3019 4 года назад

@@gabrielsalim2071 at what percent? 10?

@willietheboggle3954 4 года назад

john cuervo What is it then?

@Dan-mw4zu 4 года назад

I fucking love how no-nonsense these videos are. No clickbait, no stretching out the length, just pure, brilliant quality content. As a first year uni student, it's also exciting to see Solidworks in actual use. Great work as always. :)

@paynefulmechanix9675 4 года назад

I really love this entire build because of all of the scientific processes, 3D printing, scanning, etc.

@albonfilms 4 года назад

Steph, you and your team never fail to impress! Regular people like us never get to see the cutting edge of motorsports technology, and on top of that you do an amazing job breaking everything down. I would drop everything to take a class on competition car building if you taught it!

@bocahdongo7769 4 года назад

They are basically just normal professional car builder as we might expect. But, what makes they different with another is they tell us how they work with their knowlegde. And it's a big deal

@user-ls9ff4cu9x 4 года назад

Dude.What are you doing here. Go finish your project. Were waiting

@albonfilms 4 года назад

@@user-ls9ff4cu9x Sorry lol!

@achappel 4 года назад

Easily one of the most dense build videos I've ever watched. Wish these where an hour long! :P Can't wait for the next one!

@PVMZ 4 года назад

exactly what i thought

@aldricdeman4327 4 года назад

@@PVMZ c⁷76

@TheMatthewklos 3 года назад

Love your channel Alexandre

@jerrylee1189 3 года назад

@craigh4677 4 года назад

He did say at the beginning he didnt want to give all his secrets away, just be thankful that he and his team let us in for the amount they do, looking forward to the next vid!

@goodbyemr.anderson5065 4 года назад

And here I am, proud as a three peckered puppy I changed the lower ball joints, outter tie rod , and rear axle bearing on my wife's car. This video was amazing, I could watch hours of this without a doubt.

@Starkesea 4 года назад

GOD DAMN I LOVE THIS SERIES SO MUCH!!! I'm 5:35 into a 10 min video and he literally is just so direct on the videos I LOVE IT. If this was any other channel I bet each little part, piece, and modification would be a 50 part series. Lol

@JeanPaulConnock 4 года назад

I love that he skips the traditional 'hey guys, howya doin', this is yer boy XXXDrift69 with another build video. But before I get started, I want to give a shout out to ... " Papadakis gives us nothing but interesting and informed content. I wish I had the money to hire them to build my MX-5 into the beast it so desperately wants to be.

@nfggarage8135 4 года назад

Always love the insane quality and detail in these videos!

@Neko-uh7cp 4 года назад

Detail? Lol more like I brief overview.

@corvuslaeus9540 4 года назад

Other youtube car channels are preschool...this is doctorate level...the camerawork, the no nonsense approach, the amount of info...excellent

@Corbinworks 4 года назад

Not only is the craftsmanship second to none your narrating skills are fantastic.

@abs412000 4 года назад

I can never believe one can be more "To the Point" in a presentation.Hats Off Sir

@x-hooktowhook3904 4 года назад

Papasakis’ videos are the only videos that I stop what I’m doing and watch !

@JonathanSeni 4 года назад

What other RU-vidrs could spend 5 hours you just did in under 10min with no ads!! Pure respect!

@r7kelley553 4 года назад

I wonder how the old school fabricators feel when they see how far the technology has come and how much easier and quicker it makes a job. The laser notches alone probably saved a day of work

@tanners.6524 4 года назад

Honestly, you don't save time. But you get repeatability and accuracy. CAD design time, machine setup, and extra steps make it a longer process than traditional cage work.

@aaroneusebi6552 4 года назад

@@tanners.6524 Don't forget that with the CAD design you can also test the integrity of the cage as well. HUGE benefit.

@MindBlowerWTF 4 года назад

@@tanners.6524 How You dont save time with laser tube notching? And setup for this process is quick compared to other machined parts, You don't have to make fixtures, set it up few times to machine few sides etc., and compared to manual notching, it just cuts both ends and done, while with manual You would have to set it up at an angle for first notch, then cut to lenght, setup angle for the second notch and the rotation of the tube in relation of the first notch. It's like 3-4 times faster. You can email a rollcage/chassis to a supplier of Your choice and get it to back, all done in a week or so, compared to either finding local guy that can do it (and You cant work on Your car during this time) or transporting the car to someone decent.

@COdrummaCO 4 года назад

I can tell you, they say “I could do it faster and easier the old fashion way”

@COdrummaCO 4 года назад

MindBlowerWTF you start scanning and generating that mesh file bud, I’ll have the car plated and the main hoop up before the scan file is actually useable. On top of that. The Equipment and software costs really take the fun out of it. But repeatable and accurate annnd you can test many variations before hand if you want to get into load testing and such.

@dmeemd7787 4 года назад

Sooo effing awesome!!! The quality and next level work is something that just makes this channel so great!! And man I'd love to work there! 😁

@johncuervo3019 4 года назад

I'd like to work in that tube shop

@dmeemd7787 4 года назад

@@johncuervo3019 Yeah I was thinking about that for quite a while after watching this, really makes me miss working in drag racing professionally (access to the best of the best tools, equipment and people year-round -- i.e. when I got worked @ John Force Racing, EPIC race shop 😁😊 - good memories!)

@cnknguyen 4 года назад

Notifications at bedtime....damn it lol

@BB-zv8tx 4 года назад

Lol, I just woke up 5 minutes ago, 6 a.m here. Just about perfect timing for me XD

@xavieuhr 4 года назад

lmao same here

@maleficentcop2752 4 года назад

This is my favorite kind of bed time story....Zzzzzz LoL 🤣 The only thing wrong with these videos, is they don't come out often enough....😞 😜🤣😂👍👍

@MacKarakal18 4 года назад

This should be the benchmark of how car videos should be made. Concise but jam packed with info. Kudos!

@neon6030 4 года назад

I live in a country called Belarus and watch your every video. Thank you for showing your working methods, it develops a culture of building cars all over the world. Thanks Stefan!

@Factory400 4 года назад

"How to make a Toyota Supra cost as much as a Bugatti...." Papadakis Racing: "I'll give it a shot"

@alexmanning8710 4 года назад

How much does it cost to build a pro drift car? This project is an amazing "spare no expense" exercise as far as I can tell.

@Firebert79TA 4 года назад

Welcome to the world of competitive race car preparation.

@Shyvorix 4 года назад

@@alexmanning8710 This car could easily be worth into the millions, some can argue 1-2+ due to the sheer amount of customization considering they're rebuilding EVERYTHING about the car.

@Dr.DiegoDuarte 4 года назад

Well a Bugatti just can't really drift, so your comment doesn't make sense! Further more, Papadakis for sure is creating tons off the shelf parts to make your new supra a drift car and they'll surely cover the dev cost with ease selling these!

@Factory400 4 года назад

@@Dr.DiegoDuarte lol! Sorry you trying to make literal sense of my comment.

@khobaibzafar3601 4 года назад

God damn That is gonna be one sexy car, specially with that B58 🤤

@andrewkim932 4 года назад

This build is going to create a whole new generation of Supra fans. Amazing job!

@einzelmotorsport6711 4 года назад

Papadakis , the actual opposite of Dahm. No stupid hair product plugs, no dragging out stuff , no minutes of showing boxes, no 4th grade jokes. If we wouldn't build our own cars, this is the guy I'd want. Honest, talented, fast.

@danielangeles86 4 года назад

That would be my dream job! I love Solidworks so much and seeing all these CAD models turning into reality is literally jaw-dropping. 3D printing fitment prototypes before machining is so helpful!

@garbagetrash2938 3 года назад

Solidworks is such a pain lol. Glad you enjoy it tho, someone's gotta do it.

@joealex65 4 года назад

Yes! I have been waiting for this all week, just straight to the point with the best quality and details!

@butcht6309 4 года назад

Not a single time i got bored on the detailed explanation with the 10 min duration. Such an awesome build! Very promising!

@jimhiscott2918 4 года назад

If anyone can take a 2020 Supra (actually a Z4 BMW) and turn it into an real Supra its Pop's👍👍 This guy is hands down the best builder I've seen in my 54 years!

@idontpaytaxes6250 4 года назад

Dude, you could make a video on how paint dries and I’d watch it.

@littlerhino2006 4 года назад

Well the car is in bare metal so your wish will soon be granted.

@yasha1928 4 года назад

Thank you so much for giving this education out! I was shocked when you spoke about finding the center of a hole and it blew my mind.. Frickin AWESOME WORK!! Keep it up!

@owain7629 4 года назад

Exactly how a build video should be done. No rambling on, no BS, straight to the point. Well done 👍

@iamsuperflush 3 года назад

I've been using a caliper for a number of years now and that trick for finding center to center just blew my mind. So simple and obvious, but so clever.

@theupandcoming9622 4 года назад

Amazing work can’t wait to see the finish product

@eltroll4895 4 года назад

I was just thinking about you, I'm so glad you make this videos, it's the best of it's class on RU-vid. Your work is so amazing.

@undeadmaus 4 года назад

You're like the TED talks of race car building... this whole thing is on another level.

@HonzaLancer 4 года назад

I can sit and watch videos like this all day long. I wish it would be longer.

@87fxgts 4 года назад

Love how you step by step everything your doing, and actually show how it's being done. Instead of hiding things, you're teaching things.

@infraredsquirrel3683 4 года назад

Freaking love this channel! Keep the content coming, Steph. You're so well informed, and your build are crazy good. Wish the best for you and your teams efforts!

@shanechepren8119 4 года назад

Not a Supra guy but I am an avid car guy, I love watching this series. I also love a clean shop when working.

@Valdismith 4 года назад

You guys went far and beyond, nd stripping down the body to plain, to the last piece, sink it in chemicals, rebuild the whole engine, at this point, I don't even think it matters , if it is a Supra, or you get a Z4, or a 3 series, or an old Supra NA motor, for cheap, then do the same, strip it, soak it, scan it,, put new engine, mounting points, structure cage bars welded. You can do it with a Miata, you can do it with an Evo 6-9, any good platform to start with. So much custom work, that you build a new car, a racecar, with custom carbonfiber driveshafts, and I can't even remember half the list. Big brakes, big tires, just speechless. This is amazing, great work guys.

@Reeds_World 4 года назад

Love the 3d scanning and solid works content! Btw warm kitchen background all the way, that’s the only one I use

@zachfreeze3964 4 года назад

Watching these videos showed me what exactly I want to do with my life

@sammo303 4 года назад

It's so kind of you to make things like this accessible. As in most professions, replacing myths with truths only serves to highlight how impressive things really are.

@codylau7718 4 года назад

I work as a CAD designer and never thought about that whole trick to measure center to center. Thanks!

@dv2852 4 года назад

Damn, this is pure gold!

@3lbtrigger 4 года назад

never clicked so fast in my life. just took the Supra training course at GST Training center. I'm liking what I see so far!

@ozzy1280 4 года назад

Man this series is so awesome! I love how precise and over built everything is.

@liamcoleman8244 4 года назад

Wow, this is very satisfying to see a car built with this much precision. That rear diff is so cool too.

@tristanscott4118 4 года назад

These videos are so good. Ive really had it with these Rob Dahm, vlog style, videos. This format is so much better. Would love to see even more detail.

@PimpSpeed 4 года назад

A perfect start to 2020, i'm hyped for this

@gwot 4 года назад

but... it's march?

@PimpSpeed 4 года назад

DaDa啊達啦 2020 season i meant

@HEMIJackking 4 года назад

That center-to-center measurement trick just blew me away... so simple and fast, but never thought about it.. thanks! Awesome content, as always.

@bernardknolle4792 4 года назад

Love this channel. I work in aerospace engineering and I can't express how satisfying it is to watch you CAD something, print it, make it and run it. We go through months of rigorous scrutiny just to change a bolt.

@danielsimpson8929 4 года назад

Man... a thought crossed my mind while watching this one.. "I wonder if I could build a car with the bits they get rid of" LoL

@hus-_-bro2993 4 года назад

Imagine being the guy that get to drive this masterpiece

@gettinrigged3952 4 года назад

Absolutely blown away at the quality and new technology for all the fab work!! Incredible!!

@herwawan 4 года назад

This is fascinating. The amount of knowledge in 10 minutes. My brain is blown.

@DanielAgu.88 4 года назад

SUPRA ❤️

@waisjan6660 4 года назад

Perfection in a very high level.

@Johnny-tq9no 4 года назад

It's a drift car man there's not too much to perfect

@gaspererjavec7108 4 года назад

As a engineer i love this so much, just dont stop.

@chrisschepp3101 4 года назад

Always enjoy these videos. Full description from start to finish with quality work!

@patmald 4 года назад

the one dislike is the guy that still makes the BMW joke

@ze_german2921 4 года назад

9:50 Dammit man, Did I see them Powder Coating the Whole Damn Car?

@SocietyUnplugged 4 года назад

While F1 is still my most favourite class of motorsport, Papadakis YT channel is better than Mercedes, Ferrari and Red Bull combined. This is the pinnacle of any racing team's YT channel.

@NeedANameWithoutNumbers 4 года назад

The amount of precision and planning that has gone into this is very satisfying to watch. I'm almost more excited to watch more prep on this car than actually seeing the finished product.

@Crrtrucks 4 года назад

Rotiforms and nittos?? That doesn’t seem like Aasbo...

@el_kuks 4 года назад

He`ve told these were just for mock-up

@BradBo1140 4 года назад

This is my favorite video blog. He’s super good at explaining his builds. Very interesting to see the absolutely latest equipment used in these amazing cars.

@MyBridgestone24 4 года назад

It is so amazing to get a brief view into your world. Next level. Not sure if all race programs are this detailed (or maybe more). Simply amazing. Thanks for continuing to share.

@k-ill-s 4 года назад

Awesome! No chatter at all, only pure information, what could be better!

@creaky2436 4 года назад

Amazing top tier professionalism at work here. Mind boggling.

@gulshanthebest 4 года назад

Papadakis is best technical-auto-journalist in the world. Thats it.

@danielholland4520 4 года назад

Dude this build had been so much fun to watch, you guys are killin it! Love your detailed, yet somewhat brief explanations of everything happening, and even just how some car parts work, a ton of info packed into a nice, concise package

@davejames2015 4 года назад

Holly cow that's crazy amounts of work. Legit build got that wow factor

@PeterArmour 4 года назад

as a mechanical engineer and car lover, this video is fantastic. Please continue making content like this!

@xCodys 4 года назад

The amount of money in this car is probably insane. So much technology went into this build. So excited to see the finished product!

@evopwrmods 4 года назад

One of the Very Best RU-vid Channels for Both Extreme Horse Power Design / Build-up.....and of also Extreme Performance Chassis Design Fabrication and Build-up.... NO BS here..... their Straight-Up Racing Performance Videos are always Educational and very entertaining too....Papadakis Racing are True Professionals !!!

@adiCT0316 4 года назад

Papadakis’ contents are always straight to the point. Love the videos.

@zfloz9895 4 года назад

Respect, for you Mr Papadakis ! Because without a real manager, a real team can't be made ! Your videos are beyond inspiration, are real learn and development pieces.

@Yathartha_Singh 4 года назад

This is turning out to be quite an amazing build. Can't wait for further developments

@BabyRattlesBraddduls 4 года назад

the way you fount the center to center distance was so simple and smart

@c-fb 4 года назад

Can’t wait to see this car finished!

@kenester621 4 года назад

I really like that caliper trick. Definitely a useful trick for our build

@247th 4 года назад

This was the episode that really showed me how much special thought goes into making this thing a true drift car! Awesome work Papadakis team!

@ldproc0 4 года назад

Friggin' crazy. Made me smile the whole time. Amazing expertise and craftsmanship.

@danielbentley6000 4 года назад

The quality of this content is totally crazy. Fantastic guys.

@TBendez 4 года назад

Great quality as always! From sound to image along with the explanations given it's a joy to watch!

@FriedTurkey 4 года назад

This is what 3d printing was meant for. Not for people to make some stupid looking vases and pencil holders. Awesome vid!

@chrisjay555 4 года назад

Imagine spending all this time building a car & someone put it into the wall on the 1st drive & demolished it 😯 This is one of the best builds I've seen on RU-vid. So much information.

@MindBlowerWTF 4 года назад

Its a competition car, they will be fine as long as customer is keeping up with the payment - and thats why You put everything in CAD, driver can bin it and they can just order spares to be made if they run low.

@chrisjay555 4 года назад

@@MindBlowerWTF AHH makes sense. Can be a lucrative business then if people are regular customers.