No video :(

2020 Jeep Wrangler JL Trailer Wiring Harness Installation

Подписаться 22 тыс.

Просмотров 49 тыс.

50% 1

This video covers the wiring harness installation for Tekonsha 118786 on a 2020 Jeep Wrangler JL. Learn how to install the trailer wiring on your 2020 Jeep Wrangler JL from a U-Haul installation professional. With a few tools and our step-by-step instructions you can complete the installation of Tekonsha 118786.
To purchase this wiring harness and other towing accessories for your 2020 Jeep Wrangler JL, visit www.uhaul.com/...
ABOUT U-HAUL Since 1945, U-Haul has been the No. 1 choice of do-it-yourself movers, with a network of more than 21,000 locations across all 50 states and 10 Canadian provinces. U-Haul Truck Share 24/7 now offers customers access to U-Haul trucks every hour of every day through the self-service options on their Internet connected mobile devices. U-Haul customers’ patronage has enabled the U-Haul fleet to grow to more than 150,000 trucks, 112,000 trailers and 40,000 towing devices. U-Haul offers more than 581,000 rooms and more than 51 million square feet of self-storage space at owned and managed facilities throughout North America. U-Haul is the largest installer of permanent trailer hitches in the automotive aftermarket industry and is the largest retailer of propane in the U.S.
0:00 Intro
0:19 Tool list
0:24 Remove tail lights
1:41 Install wiring harness
5:33 Route power wire to battery
8:26 Install connector bracket
10:21 Outro

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@hotrod76. 2 года назад

It's a shame we buy a jeep for 50 grand and it's not wired for trailer lights.!!!

@AStanton1966 8 месяцев назад

I agree, especially when you are buying the top trim level Rubicon for $55,000 plus! It should be noted however, when you buy the trailering option from Jeep, you get added aux. switches for future lighting accessories and a bigger charging system.

@Michael_00001 3 года назад

I just installed this on my 2020 Rubicon Unlimited. Super easy. I have the LED taillights on my Rubicon and it works fine. Instead of running the black power wire all the way up to the battery I just spliced it into the 12 volt outlet in the back. Easy peasy!

@nathanmyers638 3 года назад

Did you have to do a exit reflash. Wanted the harness from mopar because of the double plugs. Dealer say a reflash has to be done to add any plug and play harness due to extra current being pulled on any model other than a sport s. If it was in stalled from the factory it’s already reflashed.

@nathanmyers638 3 года назад

Apparently with out the reflash it burns out the navigation system due to the pitch and roll sensing. I’m trying to find all info I can to keep them from robbing me of $800+.

@Michael_00001 3 года назад

@@nathanmyers638 Interested to know where you are hearing that from. I didn't reflash anything and just towed my boat today without issues.

@danielfunk5772 Год назад

Why does it need a power wire..? And hooking up trailers for many many years I’ve never had to run a power wire unless it had auxiliary plug or electric brakes this kit has neither

@trailerhitches Год назад

@@danielfunk5772 Daniel, the power wire is necessary when your vehicle has LED tail lights as they do not have enough power to activate the trailer light wiring harness.

@Hpdonaway45 3 года назад

May be a dumb question, but what did you end up mounting the converter to? I never saw that in the video.

@aracelyq6189 3 года назад

I had this done at A U-Haul on my 2020 Jeep Wrangler Sahara and after they were done I noticed my rear camera was no longer working and I couldn’t control my AC temperature with the buttons or touchscreen anymore. Did this happen to anyone? U-Haul couldn’t figure it out so now I’m waiting for the Chrysler dealership to check it out.

@DBZanimelover23 4 года назад

You don’t need to route it there to the if you have a 12v outlet in the trunk. It’s just a waste of time and energy. All you need it’s to tap into the wire with a scotch lock and you’re set

@mikecourtock298 4 года назад

How did you use the 12v outlet and what would I use to do that to tap int that?

@AStanton1966 8 месяцев назад

Those scotch locks are terrible. I'm currently on my 2nd scotch lock for some aux. backup lights I installed on my Silverado. Soldering is always the best way to go if possible.

@DBZanimelover23 8 месяцев назад

@@mikecourtock298 so you find the wire that supplies the power to the plug, test the wire of course with a probe light

@neilhaxby9197 21 день назад

Why do I need a butane torch

@trailerhitches 20 дней назад

To melt the plastic housing of the heat shrink butt connecter. As seen @3:00 of the video.

@phediasdemou6824 3 года назад

Is the process the same for EU Jeep Wrangler?

@lynnbeck5903 4 года назад

Why does the Jeep JL need a wire to the battery?

@tonybortko585 3 года назад

to provide power if the trailer has electric brakes.....

@andrewgrajeda3349 2 года назад

I think it's actually just in case the trailer lights work differently and need more power/pull differently somehow

@ryderwayland 3 месяца назад

How do you charge to install that?

@trailerhitches 3 месяца назад

Please feel free to check our website - www.uhaulhitches.com. This will give you the lcoal install price and details.

@brandonenglish6557 2 года назад

Yea, just a power wire, no need for flex loom or anything. Remember, this is a Jeep, it’s gotta be able to go off road. This guy is not a pro. Just tuck it in… no problem.

@liamcoleman8244 4 года назад

I thought it was much harder, why the heck would i pay the mopar dealer $1000 to do this

@DilettanteDon 3 года назад

kits is senselessly way more complicated required panel removal. This is a smarter design.

@mart14k 11 месяцев назад

Im literally stopping in the middle of this job to comment on how horrible this video is. Literally skips over where you route like half these wires. Doesn’t explain where to put the box… awful