2020 Ram Rebel Bed Mopar Utility Rail Install

VenomRebel 2020

Подписаться 1,6 тыс.

Просмотров 32 тыс.

50% 1

Economical flagpole mount solution for these • Flagpole Mount Ram Uti...
In retrospect, the Nutzert tool was probably the easiest way to compress the inserts. I was experimenting with different techniques I'd researched online. They all worked.
IG @venomrebel2020
2019-2020 RAM 1500 DT 5th Gen Pickup Box Utility Rails For 5-Ft 7-Inch Conventional Bed OEM - Mopar (82215285AB) Installed
Use the code Venomrebel2020 for 10% off LasFit Products
LASFIT: lddy.no/1cpgf
2020 Ram 1500 Rebel -
Suspension Upgrades:
Bilstein 6112s 8th Position
• Bilstein B8 6112 2020 ...
Total Chaos Fabrication Stainless Uniball Upper Control Arms
• Total Chaos Fabricatio...
Wheels and Tires:
Mickey Thompson 35" MTZ P3
VenomRex 603 Rims
• 2020 Ram 1500 Rebel Le...
Accessory Lighting:
TRX Style "Ramtor" Grill Lights
• 2020 Ram Rebel 1500 TR...
OEM Style Bedlights
• Ram 1500 Rebel OEM Sty...
TRX Rear Lightbar
• OEM TRX Rear Marker Li...
Mopar Accessories:
Mopar Bedrails
• 2020 Ram Rebel Bed Mop...
Mopar Genuine Air Deflector
• 2020 RAM REBEL - ALL M...
Truck Jewelry:
Kempter Kustoms Venom Hitch Plate
• Naming Your Truck ~ Hi...
Warranty Work:
Driver's Mat
Aftermarket Mats Reviewed
• 2020 Ram 1500 Rebel ~ ...
Rear Window Replacement (Leak)
• 2020 Ram Rebel ~ Back ...
Rear Brake Moan Kit
• 2020 Ram 1500 Rebel Ba...
Side Steps:
Westin HDX Xtreme Nerf Bars
• 2020 Ram Rebel Crew Ca...
Engine:
K&N CAI
Valvoline Full Synthetic/Lucas Synthetic Oil Stabilizer/K&N Oil Filter
• 2020 Ram 1500 Rebel Oi...
Free Hacks
Turn OFF Seat Belt Chime
• Free Hack! Turn Off Se...

Авто/Мото

Опубликовано:

20 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@jaysamuelsjls 3 года назад

Thanks for the video. I have a sprayin bedliner and it worked using your directions, I even used the needle nose vice grips. I did buy a Rivnut tool so that part was very easy. Thanks again.

@venomrebel2020 3 года назад

I really appreciate the feedback. Makes doing the video completely worth it.

@zachazlett 3 года назад

I loved my cargo rails on my Frontier. I’m happy I’ll be having them installed on my Ram this week.

@venomrebel2020 3 года назад

Thanks for checking out the video! It’s been a few weeks and I’ve used them a bunch. Very handy.

@gray_wolverine63 2 года назад

Great job. I had them factory installed when I bought my new 2022 Ram 1500 custom Rebel. 🇺🇲👍🏼

@USMCCEB 3 года назад

Thanks for the video brother it was great info and much appreciated. Went ahead and got the rivet tool also!

@venomrebel2020 3 года назад

Thanks for watching. Glad it helped. You get em on ok?

@USMCCEB 3 года назад

@@venomrebel2020 Starting tomorrow, I'll let you know!

@USMCCEB 3 года назад

Did it the same way you did and everything came out great, thanks brother!

@LLSEA 3 года назад

@@USMCCEB Great video! If we have nutsert tool, do we still need mallet tool to tap the nutsert in or nutsert tool will push it in by itself? Also what is the nutsert tool mandrel size? M6, M8 or M10? Thanks.

@jesusfrocha2689 3 года назад

Nice video will get one ☝️ thanks 🙏🏽

@canadiand6371 3 года назад

Just picked up a new rebel , the rails weren’t installed , had to order nutserts online and thanks to your video I can do it right....Going to watch more of your videos for sure thanks

@venomrebel2020 3 года назад

Thank you. Congratulations on the new truck

@712mpinz 3 года назад

what was the part number for the nutzerts?

@victorramos9404 Год назад

Do you remember where you got the river inserts? Just pick up rails and bolts but no rivets since they were installed in the old truck

@leondodroe4768 11 месяцев назад

Any info on the nutzerts? I need them for mine as well. thanks!

@daryldowg8496 Год назад

Nice video guys!

@venomrebel2020 Год назад

Thanks!

@braden9536 Год назад

I had to dremel the holes a bit to knock down some of the bedliner - the nuts refused to go in even when smacking them with a claw hammer until they had some additional clearance. I also had zero luck attempting the instruction method to flare the nuts using a bolt - the nut just spun (I used a torque wrench and it never got close). I also couldn't get the nut to crush using the nut & bolt & 2 wrench method. Ended up needing to get the tool, and then it went smoothly.

@venomrebel2020 Год назад

Glad you got them in. In retrospect the nutzert tool is the easiest method, but not everyone loves buying new tools. My rails are still rock solid.

@richerich853 3 года назад

What size Nutcerts did you use? Seems like it would be the better way to go instead of using the factory nuts..

@venomrebel2020 3 года назад

I can't recall what size... the factory nutzerts are aluminum and hexagonal so they don't require a compression tool. The one I used from the kit was carbon steel and round therefore requiring the tool.

@1gr8oil 3 года назад

I have a 2020 Ram Rebel, with a plastic bed liner, so I assume I will have to drill through the bed liner to get to the holes on the bed. Thanks for the video, and your son did a GREAT job too!

@venomrebel2020 3 года назад

Thank you 3000% I had a plastic bed liner in my 2006 Ram. I really liked it. Yeah, for these rails you would need puncture the plastic. If you can definitely find the holes, like by the tie downs you can hold up the rails to reference the others I would think. Let us know how you do and thanks for watching 😎

@venomrebel2020 3 года назад

If you need a measurement to get started let us know

@1gr8oil 3 года назад

@@venomrebel2020 Thanks

@1gr8oil 3 года назад

@@venomrebel2020 If you could give me the measurements from the front of the rails to the front of the bed, as well as those from the bottom of the bed to the bottom of the rails. I also have a bed cover., so that is why I would need the measurements "bottom of bed to bottom of bed rails". Thanks in advance, plus sharing this video!

@venomrebel2020 3 года назад

@@1gr8oil I'm not sure how much your plastic bed liner will interfere with these numbers. When I say back I mean the area of the bed closest to the cab. From the bottom of the bed to the center of the bottom bolt on the rails is 14" exactly. From the back of the bed to the center of the bottom bolt on the rails is 6" The front rail is also 14" up and exactly 1" back from the swell at the front of the bed. Again, when I say front I mean the area of the bed closest to the tailgate. Good luck!

@johnnysamples 2 года назад

Are the sliding cleats able to come off? May offer an extra inch on each side in case of loading like a ATV.

@venomrebel2020 2 года назад

It would be a lot of work to remove them. There are some caps at either end of the rail, but it looks like you'd have to remove the rails to do this, and I don't believe it's designed with this in mind.

@randomstuffwitheddie6890 2 года назад

What size nutzerts are those?

@Mike_Cross 3 года назад

Enjoyed the video, well done. Thanks. What material is the Nutserts, Rivnuts that come with the kit? Aluminum, steel, or stainless? If they are steel, I might want to get some Stainless ones prior to getting the kit. Thanks i advance.

@venomrebel2020 3 года назад

Thanks! The rivnuts that come with the tool are carbon steel. I believe the hexagonal rivnuts that come with the rails are aluminum. I may be wrong. The rails themselves are anodized aluminum.

@Mike_Cross 3 года назад

@@venomrebel2020 Thanks for the reply, Yea, I was referring to the bed rail kit. Sorry, should have specified. They looked like aluminum, and wasn't sure how durable they would be. Might have to get some stainless ones. Thanks Again Mike

@venomrebel2020 3 года назад

@@Mike_Cross Stainless is a good thought for sure 👍

@jaybly13 2 года назад

Thanks for the video. Im trying to see if my existing bed cover from my rebel will work on my new trx (when it arrives). Would you be able to tell me what the total distance is between the rails, feom the left side to the right side?

@venomrebel2020 2 года назад

Thanks for watching friend. ✌️ I’m having trouble following the logic of your request. Sorry! Maybe you can explain further.

@jaybly13 2 года назад

@@venomrebel2020 my apologies for being unclear or simply not explaining myself good enough. So, before you installed those rails, the width of the bed was some distance. Now you added those rails and the bed of the truck is now slightly more narrow. What is that new distance from side to side, inbetween the newly installed rails. Thanks much.

@nathancousineau1243 3 года назад

Will I be able to install a headache backrack with the bedrails?

@venomrebel2020 3 года назад

That’s a great question. Most of the tonneau covers I have researched will fit with the rails. If I were you I’d email the company that makes the rack you’re looking at and see if they can confirm fitment with the rails. Let us know.

@doug4772 3 месяца назад

So they cover the bed lights if you have them? That sucks. On my ford they had the box link plates you could mount the cargo tie downs...but they weren't adjustable like RAM. That might be a deal breaker...

@venomrebel2020 2 месяца назад

It’s not too bad. Mine are aftermarket and brighter.

@Jnu925 3 года назад

I'm going to assume I should get the rails installed prior to getting line-X sprayed on?

@venomrebel2020 3 года назад

It will probably be easier

@drjbb 2 года назад

Would you be able to add the swing arm storage box to this also.

@venomrebel2020 2 года назад

That I’m not sure of. I know someone who has those boxes. I will take a look next time I see him.

@MMcDowell23 10 месяцев назад

has anyone done a DIY bed rail system using the Unistruts, and only one set of these stock of these sets of holes the nutserts go in ? ??

@venomrebel2020 10 месяцев назад

DeeZee makes a kind of cleat that fits I believe.

@basicbarks 2 года назад

Need some replacement nutzerts....is there a particular size I need?

@venomrebel2020 2 года назад

I believe this is correct... Hole Size: 0.354 inch / 9mm Thread pitch: M6-1.0mm If you're asking what Rivnuts to buy, they'll just be called M6 Rivnuts.

@basicbarks 2 года назад

@@venomrebel2020 I appreciate you!

@ralliart10006 3 года назад

What exhaust do you have?

@venomrebel2020 3 года назад

Carven R. Had a shop cut off the factory muffler and weld it on. I show what it looks like in my first video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d9ZEDCJlsGY.html around the 5:20 mark