2020 Yamaha F150 outboard impeller replacement 

Thank you, Thanks for watching.

You could sorta say that. Mainly the engine so quiet forgot it was running when pulling out of water it ran 30-40 sec out of water, noticed next time on the water the coolant pressure dropped from 16 to 10 and the pee stream just spitting at idle. Temp didn’t get hot but changed impeller and restored pressure. Dry land cruising is no joke. It happens fast. Thanks for commenting

Dry land cruising with only 23 hours on new outboard. It was out of the water for 30 sec, didn’t get hot so ordered only the impeller and housing kit, the grease was tacky enough to hold the o’ring seal in place for Assembly. So didn’t need the whole 100 hr parts. I went to flush engine in freshwater and noticed the tell tale took forever and just dribbled, coolant pressure was 1/2 the original especially at idle. Now the tell tale is instant after startup and good stream coming out, I’ve put another 38 hrs on since then. Thanks for watching and commenting.

No. Neutral. Thanks for asking.

It’s threaded. There is a rubber plug above. Pry it out and it will expose the bolt.

If lower unit torque is what you’re lookin for it’s 34 ft lbs on 2020 Yamaha F150. Thanks for commenting.

@@kwikrench thank you!