Тёмный

2021 Can-Am Defender Xmr: 2 inch bracket lift installation/review 

LC Powersports
Подписаться 7 тыс.
Просмотров 41 тыс.
50% 1

We got our hands on this 2021 canam defender xmr camo edition and immediately started installing some goodies we started off with a bracket lift from kemimoto and also put on some 33 inch tires!

Авто/Мото

Опубликовано:

 

2 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@RealTalkPowersports
@RealTalkPowersports 3 года назад
Still one of my favorite SxS of all time.. we miss our 2019 XMR defender... We had her up to 20 inches of ground clearance up front.
@LCPowersports
@LCPowersports 3 года назад
He already wants to go bigger😂
@keithlucas6260
@keithlucas6260 3 года назад
The larger the tire the less torque at the wheel and the need to carry an extra belt. The dealer also said that lifting it and adding larger wheels/tires unless factory approved, voids the warranty.
@charlesstrickland4407
@charlesstrickland4407 3 года назад
Your video was the inspiration I needed to go 33s. Keep videos coming!
@LCPowersports
@LCPowersports 3 года назад
Awesome man what tire did you go with!
@charlesstrickland4407
@charlesstrickland4407 3 года назад
@@LCPowersports I’m going UTV boggers on 20s. Will be ordering them Monday.
@LCPowersports
@LCPowersports 3 года назад
Ahh! That's going to look sick!
@matts9352
@matts9352 3 года назад
So...I lifted my buggy years ago in my garage, but I couldn't put the new wheels/tires on bc I only have a 7' high door. Got it done, rolled around to get the suspension unsprung. I should have cleared by just a half inch, but I never accounted for the raised apron on the driveway that helps keep snow away from the door seal so it doesn't freeze and smacked my door pulling out. Luckily it only put a small dent on the inside of the bottom panel. A little rattle can black on the top of the cage (roof was off thankfully) and I was golden. I laugh every time I see the dent
@LCPowersports
@LCPowersports 3 года назад
Haha yeah ours was close too!
@johnnyvape3585
@johnnyvape3585 3 года назад
Great looking tire package! What is the width of those tires?
@bq6162
@bq6162 Год назад
Hey is this all done on stock clutches? If so, do you plan on making any changes to clutches? Thanks for any info.
@normanlapierre142
@normanlapierre142 3 года назад
that canam looks good .amn his polaris looks funny on stock wheeles
@LCPowersports
@LCPowersports 3 года назад
Haha yeah it does look pretty funny! We will be going a different setup on it very soon.
@NateDizzi
@NateDizzi 2 года назад
Is the defender on stock arms in the front or do they have forward?
@LCPowersports
@LCPowersports 2 года назад
All stock
@rubenreyna9218
@rubenreyna9218 3 года назад
With that bracket lift, will 35's rub or will they be fine?
@LCPowersports
@LCPowersports 3 года назад
Not sure I bet it wouldIbe close!
@ArizonaKid
@ArizonaKid 3 года назад
NICE !! I’m looking to get a Pioneer 700-4 in March for hunting .
@LCPowersports
@LCPowersports 3 года назад
Thats awesome man! We are going to be doing some stuff to one in a future video!
@ArizonaKid
@ArizonaKid 3 года назад
@@LCPowersports I look forward to that video
@LCPowersports
@LCPowersports 3 года назад
@@ArizonaKid heck yeah man
@doc559
@doc559 3 года назад
🏆🏆🏆👍🙏 Thank you for sharing
@LCPowersports
@LCPowersports 3 года назад
🤘
@marcelloushearns9946
@marcelloushearns9946 2 года назад
What brand of windshield? And how do you like it?
@LCPowersports
@LCPowersports 2 года назад
I think it was a superatv winshild! And it works good!
@70s_kid
@70s_kid 2 года назад
Great video! Thanks for sharing. I put 30" ACP frontlines on my stock 2021 and they rub pretty bad, Are you still liking the Kimemoto lift? Can you tell me what brand of winch bumper that is? I have been stuggling to find one made for a 2021. Thanks
@LCPowersports
@LCPowersports 2 года назад
For the kemi moto lift it does wat its supposed to do im sure there are more well build ones out there though. The bumper comes stock on the xmr. I can look around and see what I can find though!
@randallreid1081
@randallreid1081 3 года назад
What offset on those wheels??
@LCPowersports
@LCPowersports 3 года назад
O think 4 3
@ecureed
@ecureed 3 года назад
So is the 850 definitely done??
@LCPowersports
@LCPowersports 3 года назад
My canam outlander 850?
@gp-jq2qe
@gp-jq2qe 3 года назад
You have a link for this kit? Everything I can find says does not fit 21 Xmr crew
@LCPowersports
@LCPowersports 3 года назад
Are you looking on the kemi moto site?
@CesarMedina-kw7ih
@CesarMedina-kw7ih 3 года назад
I just went on the kemi moto site and it says that it won’t fit a 2020 XMR. I was wondering the same thing too because I would like to get them for my 21 XMR crew
@LCPowersports
@LCPowersports 3 года назад
@@CesarMedina-kw7ih i think it's the same for both
@CesarMedina-kw7ih
@CesarMedina-kw7ih 3 года назад
@@LCPowersports thank you for letting me know
@LCPowersports
@LCPowersports 3 года назад
@@CesarMedina-kw7ih no problem!
@unclebilly1353
@unclebilly1353 2 года назад
Next video, how too install a higher garage door?
@LCPowersports
@LCPowersports 2 года назад
🤣🤣🤣
@martinreina3868
@martinreina3868 2 года назад
Thinking about doing the same lift with 32s. What was rubbing? Curious if I will need spacers.
@LCPowersports
@LCPowersports 2 года назад
You can fit 32s no problem
@martinreina3868
@martinreina3868 2 года назад
@@LCPowersports of you don’t mind me asking. What was the deal with the 33s? I’m gonna be running 32x10x15s
@LCPowersports
@LCPowersports 2 года назад
@@martinreina3868 what do you mean?
@martinreina3868
@martinreina3868 2 года назад
@@LCPowersports like where were they rubbing? I considered 33s. On the inside fender?
@LCPowersports
@LCPowersports 2 года назад
@@martinreina3868 I think so not bad though
@davisfamilyshenanigans4807
@davisfamilyshenanigans4807 2 года назад
‘Like’ because of the burnout😂
@LCPowersports
@LCPowersports 2 года назад
😂
@addisonestes1219
@addisonestes1219 3 года назад
Did you put spacers up front?
@LCPowersports
@LCPowersports 3 года назад
The wheel adapters are 1 inch all the way around I think he was gonna do 2 in the rear and one in the front because the front is alot wider now.
@addisonestes1219
@addisonestes1219 3 года назад
@@LCPowersports any issues with the 1” spacers?
@LCPowersports
@LCPowersports 3 года назад
No issues at all! It really doesn't need it but it does look better with them!
@addisonestes1219
@addisonestes1219 3 года назад
@@LCPowersports may I ask what brand? Saw some great reviews of bora
@LCPowersports
@LCPowersports 3 года назад
Im not to sure what brand they are. He just brought them to us when we installed them. But I would recommend a good name brand set just to be safe!
@RealTalkPowersports
@RealTalkPowersports 3 года назад
We are ready to ride with yall
@LCPowersports
@LCPowersports 3 года назад
Definitely man
@LCPowersports
@LCPowersports 3 года назад
Im ready for summer time this cold weather is not fun without a enclosure haha!
@ediflash6955
@ediflash6955 11 месяцев назад
Better
@Shood411
@Shood411 3 года назад
Its not going to fit in that garage when your done, maxed for height right now
@LCPowersports
@LCPowersports 3 года назад
We know thanks man!
@pedrosantos6472
@pedrosantos6472 3 года назад
where is glory hole?
@larrysmith7118
@larrysmith7118 2 года назад
Dude stop using those channel locks
@LCPowersports
@LCPowersports 2 года назад
🤣
Далее
Best exercises to lose weight ! 😱
00:19
Просмотров 14 млн
Can Am Defender Zbroz 2" Bracket Lift Kit Install
8:16
2022 Can Am Defender Pro Limited "One Year Later"
19:39
Putting a 2" Lift on The Defender XMR
8:22
Просмотров 16 тыс.
Can Am Defender on 32s Making it Look Easy
11:06
Просмотров 15 тыс.
#73 Can Am Defender XMR Trail Review
26:30
Просмотров 59 тыс.
что за звук?
0:15
Просмотров 3,2 млн