2021 GMC Sierra AT4 - High End Audio System Overview - Accuton, Helix, Mosconi, Focal, Audiofrog

Подписаться 475

Просмотров 12 тыс.

50% 1

Here is a detailed overview of my DIY high end audio system in my 2021 GMC Sierra AT4. This build has been about 18 months in the making and seen many, many different iterations. I can finally say that the build is complete and wanted to make a video walkthrough of the system to prove some further detail of what went into the build.
The walkthrough is little over 22 minutes long and there about 13 minutes of some key build log photos.
I’d say there are over 500 hours into this build between all of the iterations but I’m extremely proud it.
Please leave any comments below and thank you for watching!
Equipment/Materials from: Accuton Automotive, Helix, Mosconi, Focal, Illusion, Audiofrog, Steg, Resonix Sound Solutions, Fiio, Stinger, KnuKonceptz, RSD Custom Cables
Custom Fabrication: Vanguard Automotive Design, MTI Acoustics and DIY
Full build photo album here: tinyurl.com/yc75rh2b
Full build log here: www.diymobileaudio.com/thread...

Игры

Опубликовано:

27 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@markbest4230 2 месяца назад

I knew at the end there was a lot of influence from Peter from PSSounds! That's my guy 2!

@robintodd3901 Год назад

Best build I’ve seen done from that side of the pond. SQ focused done superbly.

@lukeouellet Год назад

Very much appreciate that!

@Clint_the_Audio-Photo_Guy Месяц назад

Lovely. Getting inspired to do my regular cab Silverado. :D

@Chahtawarrior31 8 месяцев назад

Awesome set up and nice gear too! Just started SQ build on my 2020 Camry XSE and Its a slow long process! I might have to get the Helix processor cause the stock radio sucks and all the climate and data is in it!!! Sigh Semper Fi and Can Do

@jasonbertholomey1142 Год назад

Fantastic job with everything Luke! Even having followed the entire build on DIYMA, it was amazing to see the entire project here. Excellent presentation!

@lukeouellet Год назад

Thanks Jason! I’m excited to hear your Audi one day.

@tcaudiomute Год назад

great job luke ! well done

@karlkiernan6863 7 месяцев назад

Really nice build and no better place to have such good equipment as we spend so much time driving about.

@chrisN80 Год назад

Beautiful set up. Great job.

@BMW1M Год назад

Awesome build! 😍

@lukeouellet Год назад

Thanks man!

@aroach337 8 месяцев назад

Well done. A build to rival some of the best. I would love to hear this beast.

@lukeouellet 8 месяцев назад

I plan to attend both SVR and Finals next year if you are anywhere near those events. Don't be shy, happy to give demos

@lbaudiolojze6797 Год назад

Great install!

@lukeouellet Год назад

Thanks LB! This front sub wouldn’t have happened without your help.

@ZM-mc1kx 9 месяцев назад

❤nice setup

@edwardbarnett6318 Год назад

Beautiful build. I think I've changed my Silverado set up as much as you have. Car audio is addictive 😂...

@djrez2107 Год назад

amazing must sound great

@lukeouellet Год назад

Thanks man. I think it meets my lofty goals and then some.

@ngiczat Год назад

Looks great Luke. Hope I get to check it out in person

@lukeouellet Год назад

Thanks Joe!

@jovenlara5868 Год назад

Congratulations, great build man!..can you please explain a bit more about differential rear fill?...I just don't seem to fully understand how you properly set it. Thanks

@WattsAdvisorsLtdCPAs Год назад

very nice build... have to laugh at the part where you said you didn't want to modify the work truck too much! lol...

@scottlincoln6286 3 месяца назад

Nice job..!

@lukeouellet 3 месяца назад

Thank you! Cheers!

@user-io4vb7lt1d Месяц назад

@@lukeouellet I really appreciate and admire the detail and technique of your installs. Very awesome, keep it going! I have a question regarding the MK3 DSP. Can you give a brief explanation of how to run the front sub from the helix? Thanks.

@kpierce1986 Год назад

Thanks for the walkthrough Luke. Amazing build. Probably the best sounding truck on the construction site. 🫡

@lukeouellet Год назад

Thanks man. Certainly have to agree with that lol

@philkoberg1461 8 месяцев назад

Hi. Love seeing people continue to strive for greatness. I have installed professionally in the 90s-2000s and I love seeing the detail and quality. I’m just beginning my 2021 Silverado RST. Would love to ask you a few questions if you wouldn’t mind. Love seeing this type of work!

@lukeouellet 8 месяцев назад

Thanks man! And ask away. Happy to help

@philkoberg1461 8 месяцев назад

So my last build was my first with an active 3 way setup and DSP. I used a JL Twk 88 and worked fairly well. Now that I am locked into the OEM GM Bose I need something more substantial. I have been looking at the Helix 10 channel and the Mosconi 8 to 12 Pro DSP. My question is what are your thoughts on both units and how safe is it to buy a Helix on EBay? Is the DSP the only unit I need to integrate the OEM? I appreciate any help you can offer! Thank you!

@philkoberg1461 8 месяцев назад

I guess I will tell you what I am installing. 3 way Dynaudio Esotec fronts and 2 way rears. 2 JL Flat 10’s. 2 JL HD600/4’s and HD750/1. I was also thinking about adding either an Android tablet or IPad. Figured I would tell you the whole story. Thanks again.

@philkoberg1461 8 месяцев назад

Hi. Sorry to bother you but wanted to check in and see if you had a chance to see my questions? Thanks man.

@lukeouellet 8 месяцев назад

@@philkoberg1461 hey man sorry it took me so long to repsond! I am huge Helix fan as their reliability, customer (and community) support is second to none. Assuming that you are running the rears on a passive crossover, then the DSP Pro mk3 is the perfect choice, the Conductor controller is also by and far the easiest remote to use and mount. The Mosconi Aerospace 8/12 with the new software is also solid as well, last recommendation would also Arc Audio PS8 Pro. Otherwise, you have a great system laid out.

@ryan72350 Год назад

that is one amazing build. truly a work of art. did you do all the work including a pillars and dash yourself ?

@lukeouellet 8 месяцев назад

A Pillars and Dash Pods were done by Nick Apicella at Apicella Auto Sounds in Stony Point, NY. Everything else besides that and the sub box was done by me.

@chrisN80 Год назад

Question what did you used to get the signal from the factory radio to the dsp

@vladmoshkovich708 4 месяца назад

what kind of coax cable you are use for fiio?

@rmyrie5963 8 месяцев назад

Where did you get the rear speaker pods, and why do you say you regret the second skin. Thanks

@SachinGupta-mb3pz 25 дней назад

@luke ouellet great fabrication with top notch components. I can not affort accuton, so wanted to check how good r morel elate 3 way. Thanks.

@lukeouellet 25 дней назад

Personally if you are trying to chase anything like the Accuton sound, shy away from Morel - far too laid back for my taste. I would look at BLAM Multix, Focal Utopia, Bliesma before Morel

@Bigz28 Год назад

How did you bypass the Bose if your truck came with it ?

@jpmerrick8886 Год назад

Nice i use helix too and swap 1000 amps lately Revelation audio madison or audiowave aspire class a v2 or etc and for midrange i use zr speaker labs 9dd or 12m or f1 extravagance and doors 6 inch dynes supremos rainbows etc head unit nx5000

@patrickmiller4987 4 месяца назад

Who cares what you run?

@ReddDot 5 месяцев назад

Very nice install,I have question about the rca cabling, where do you buy it. I need some really bad

@lukeouellet 5 месяцев назад

You are going to want to look Resonix Sound Solutions, Solderless RCA System. Premium components and huge time saver.

@lukeouellet 5 месяцев назад

resonixsoundsolutions.com/shop-resonix-solderless-custom-rca-system-products/

@ReddDot 5 месяцев назад

Didn't expect to get a response so soon .Appreciate it,I will be ordering these products soon

@jamiecoulter1923 10 месяцев назад

Is your back seat able to fold down? If so how did you do that because if i mount 3 or 4 thousand dollars worth of amps i want to be able to show them off. I know from factor its not foldable unless you remove the headrest. Thanks

@lukeouellet 10 месяцев назад

It doesn't fold down per se. I just keep the headrests out so I can pop the back seat out easily.

@themodifiedlife2774 11 месяцев назад

What do u have ur rear subs crossovered at? Is it the same as the front sub up to 150hz?

@lukeouellet 11 месяцев назад

Rear sub 0 - 50 Front sub 50 - 100 Midbass 100 - 250

@themodifiedlife2774 11 месяцев назад

@@lukeouellet thank you was also curious on where u got the little control bass knob holder that sits in the cup holder?

@jpmerrick8886 Год назад

I have mosconi class a modified by steve mantz im rotating in today

@patrickmiller4987 4 месяца назад

Good 4 U

@jackandthebeanstalk4523 11 месяцев назад

What type of rca are those?

@lukeouellet 11 месяцев назад

Resonix Sound Solutions - Solderless RCA System

@jackandthebeanstalk4523 11 месяцев назад

@@lukeouellet this is your own brand?

@lukeouellet 11 месяцев назад

@@jackandthebeanstalk4523 resonixsoundsolutions.com/shop/

@Goinallin662 Год назад

How much for this complete build?

@lukeouellet Год назад

Hard to say because most of the build was self built so I saved myself tens of thousands of dollars in labor. But if you wanted this type of build done by a high end shop, I’d expect to pay 40-50k. But like I said, I don’t have even have close to half that invested having done most of the build on my own.

@Goinallin662 Год назад

@@lukeouellet Thanks, but my budget is only about 7k... I'm pretty sure it sounds great!!