2021 RECORD! 150 CASE Road Locomotive pulling 44 bottom John Deere plow 

Yeah that’s because John deere needed to make their tractors crappier, had they stuck to their original best-sellers, like the B, D, L, and many others, farmers could fix anything on them.

They europeanised their brand. Make everything with planned obsolescence so the dealers can make money on repairs.

If they can fix it then let em’ fix it. If they can’t they’ll bring it to your dealership. You ain’t Ferrari, deere.

А современные трактора 26 плугов могут тащить так не пренужденно?

Isn't joke

This bad boy was built in 2018.. so sometimes they do!

What a super project. Could it be an instance of back to the features.

they make them better. Theres a reason noone uses steam engines for anything

they ain't ploughing that deep and the power ain't really that impressive here. the impressive part is just traction but even that ain't that impresive due to the good ground and the heavy weight of the machine

Yeah, I just drove my Mahindra into the pond.

It's 11k Nm. That is insane It's the power of 4 semi trucks. Like 4 Scania V8 540.

What is piston diameter and stroke plus steam pressure please?

I must be above average

I think this must have been where the term 'grunt' first applied to any machine.

It moves slow, but it'll never, ever slow down

To me it sounds like a very large animal panting

Like a 50 ft plow wasnt there! Truely a marvel of machics! Im smitten!

Its probably tame in its power compared to modern standards

If you admire this engineering wait until you taste the engineering that's been put in the food! It's a shame how much waste... I mean food that comes from that marvelous machine. Never would have thought that I'd see the time when the "breadbasket" of world accepts a corporate mandate forcing Farmers to sow bad seed! #WakeupAmerica. 😴

Steam Power is way underrated

@@randomuser4201 A 2 cylinder steam engine is much more powerful than a 4-stroke engine with the same displacement. Typically equivalent to an 8-cylinder 4-stroke, and with far, far better torque at low speeds all the way down to 0 RPM, whereas 4-stroke engines can barely operate below 1000 rpm without stalling dead, whereupon the 4-stroker immediately produces zero torque, whereas the steam engine can continue to produce torque all the way down to 0 RPM or even being forced into reverse.

@Scott Crawford Modern water tube boilers don't have those safety and catastrophic failure or issues (which are inherent in the "fire tube" boiler design).

Bruce, AMERICAN PRIDE RIGHT THERE ! 🇺🇸

@@jessewoody5772 Workmans pride!

You must have been a kid when you were running those machines

Yep, she's in fine voice! I learned about steam engines and tractors from my Uncle. I wish he was still alive to see this. Well maybe you can ;)

Repent to Jesus Christ “Gracious words are a honeycomb, sweet to the soul and healing to the bones.” ‭‭Proverbs‬ ‭16:24‬ ‭NIV‬‬ F

There is an interview on here with an old Irish farmer from the 1850s and he says mechanization was the biggest change in his whole life.

@@kebertxela941 not for the better either

Imagine the shift when the entire electrical grid is disassembled, and we look back and wonder why people had 13,000 volt wires running right next to their home. We are living in the most barbaric times. I suppose people don't appreciate the modern inventions when they arrive. It's not until you look back on things 50 years later and wonder how you ever lived without it.

@@350mack I mean it is for the billions of people that have been able to live because of bounty provided by industrial agriculture...

@@350mack Yep. Leaving the oceans was where we went wrong.

Both

The earth is not spinning at all

@@user-kr8mi1po8d Earth is flat

@@IgorMokrushin maybe

@@IgorMokrushin If the Earth was really flat, cats would have knocked everything off of it by now.

And give Greta Thurnberg a well earned fainting spell.

@@robt3407 shut up, she dont have nothin do do with this.

@@audunms4780 triggered

@@bobbybass8505 HA HA HA ha hA Ha hha, dud 2016 called and want you impaled on a spike ivan style. You are injecting politics into a video honoring the labor of american workers of the curent and previous century. But If im gonna get political. THAT TRACTOR IS NOTHING NOTHING! SOON WE WILL HAWE TRACTORS POVERD BY THE INFERNAL FURNACE OF THE BLODY SUN! YOUR COAL POWERED TRACTOR IS NOTHING NOTHING, WHENCE THE STARLIGHT OF OUR CLOSEST DARLING DANCES UPON THE FIELD, OUR INDUSTRIAL MIGHT WILL ARIZE OUR TRACTORS TURNING THE SOIL POWERED BY PANES OF GLASSSS AND SILICON THE ELECTRIC ERA HAS ARIVED AND ITS GOD IS SHINING EVERMORE! NUKLEAR POWER IS MEARLY A MOCCERY OF THE NATURAL ATOM BOMB THAT IS OUR SON: THE SUN THE SUN THE LONGSHINING SUN THESUN SINGS THE SUN THE SUN THE SUN!!!!

@@audunms4780 you need a psych Visit

Mc Louth KS show is a big show they have steam engines of all sizes switch off dutys on saw mills thrashers balers everything we use to go every year as I was growing up we'd haul a family friend's 2 Rumley oil pull tractors up while they hauled their show and stock pulling tractors they had a nice collection of Minneapolis Moline tractors and depending on the ones they tools they could get their 7 pulling tractors on 1 semi and 5 to 7 show tractors on the other depending on if they took a big boy or not 4 generations pulled back when they'd let dad walk beside the tractor or ride on the fender while a 10 year old could pull the sled they had a 50 ft by 20 full of antique tractors mostly M,M,s a few Farmall and Deere and an 80 by 20 of projects with a fence row of parts tractors almost a quarter mile in the back and some set along the highway right of way for yard art and they still save as many as they can I always tell my buddy the family concrete and demolition buissnes is their hobby and tractors are their job he says sounds about right he has no idea how many tractors they own but at 1 point they had almost 40 restored and for sale

@Scott Crawford a little town called McLouth just west of KC not far from the agricultural museum I can't remember for sure I think thats in Bonner Springs it's been awhile since I've been to the museum they called it the agricultural hall of fame it's a neat place to spend a day walking around seeing the progression of farming I didn't know there was almost 100 different styles of barbwire since it's invention till what's used now till my first time there and it's either the first or second weekend of August I believe if you Google the town it's the main attraction for a small town they have acreage probably bigger than the town itself for the show and a farmer let's them use his wheat field for parking I think that's where they get the wheat to thrash all weekend it's been 5 years since I was last able to go I told my Dr I was putting of this year's surgery till after the show soon they'll run out of vertebra to hook together with their scrap iron pile maybe the blacksmith can fix me up at the show

@Schiefe Ebene get the blueprints and most of it's a little blacksmith work and plumbing or you could cheat and weld instead of rivet it together gears pistons and a flywheel and a KS farmer and his son who was running it for the video built it while he was growing up so he knows every inch of it now I'm sure his kids will too growing up helping with maintenance and repairs on it I can't remember the cost I was in my teens when I got the grand tour and they gave the hrs it took over the years and cost but most things were salvaged from other steam engines but it wasn't crazy expensive according to my dad

@Scott Crawford I'm glad my kids all got into getting their hands dirty we've never taken on a steam engine but we've restored plenty of old farm equipment and have a couple tractors each we still all do our gardens with we all have very large gardens mine's the smallest now at roughly 5 acres I use a Farmall M and Ford 8N we all do snow removal too with our old loader tractors and rear mounted blades then we got an old little bobcat that the bucket is a little narrower than a sidewalk I believe 2 ft wide we built a sidewalk V-plow for it quick work of a sidewalk and not much to shovel those old tractors sure make you appreciate the comforts we have in our tractors now days

@Schiefe Ebene farmers that don't raise livestock have free time in winter unless they broke alot of equipment during the year if it wasn't for me having 7 kids in and out of the shop we wouldn't because my welding shop is pretty busy fixing the neighbors around us stuff as well as our own and that's when all the racecar engines come in the mechanic shop my dad still gets out on nice days and thinkers around on the antique tractors my brother and sister come over every weekend to help and we have 1 full time guy doing fabrication and welding and a high school kid part time a few hrs after school I hope he wants to go full time after graduating next year if he doesn't go to tech school or college 16 he's a good welder and seems to enjoy it I like having him around and poor kid needs to have some guys around more single mom and 3 sisters I have to keep reminding him in the shop he doesn't have to put the seat down he gets a kick out of it when we tell him that

and, all of that carbon (smoke) filters into the soil, replacing its composition, and sustaining the planet Plus, the Plowed field grows corn/wheat/barley. etc to feed the masses. How about that for eco-friendly.

It will all come full circle when the world falls apart. 😀.

How old are you if you don’t mind me asking?

me too im 40 yo

Just about to hit 80.

Growing up in Trinidad we had steam rollers. That rolled the asphalt on the roads.

The horses would scatter !!

In my area mostly they were used to power threshing machines ( not sure if there was ever a thresher built big enough for this tractor ) but I remember him talking about seeing the threshing crew moving down the road, tractor first , pulling the threshing machine , coal tender next , half dozen bunk houses hooked behind , cook shack last . All hooked together, followed by all the teams with stook wagons , and the spare horses in back . Must have been a heck of a sight for a kid

It's made of so many little bits and pieces..1905 technology at its best. Now there're making Starship rockets the goal being Mars.

Full steam ahead! 👍

it was the sentinel (steam wagon). it had 70 hp at 250 rpm! thats about 2000nm of torque or about 1500ft-lb google it there isnt much about the car, but its interesting, btw its a 10,5l 2 cylinder lol

Thanks for the information!! Much appreciated.!!!

compare that to some of the early fuel tractors at 50 or less Hp.

The 2021 Cummins has way more power. This case is only 150 HP and of course with hydraulic drive or low gearing, the 2021 Cummins wins against the steam engine in this Case tractor for pulling too. Gearing and hydraulics can change torque in the formula, power = torque*RPM. SO many people seem to forget that.

@@EETechs nah, old is gold keep that modern garbage away from me.

@@Richard-et3cl Blame that on the government mandating that all diesels require that DEF fluid crap and all the electronics that goes with it. Nothing I can do about that. That's politicians being idiots. :(

So world changing they didnt even make 10 😂😂

@@thehardman9379 well said.

@@thehardman9379 Of this type yes, but engines like this where pretty pretty common up until the maybe the 1920s.

@@thehardman9379 ever hear of a prototype?

@@trey6563 ever heard of candy? Candeez nutz hit ya in the mouth.

the tractors not bad either

Do they make a diesel that can do that much work? 🤔🍻

Far bigger than any I have seen working.

That black soil looks Ukrainian.

hey man...there is just simply some kind of unseen connection between man and machines...doesn't really matter where you are from

I'm a farmer and go to shows where we use steam engines antique tractors and equipment and probably meet more "city folk" than farmers we love explaining what the machines are and do and give demonstrations and even a ride most farmers love to explain the progress from ox and horse farming to modern farming because so many people are afraid of today's methods but don't know the science behind it especially when you say GMO and roundup everyone freaks out

He didn't put it back together. They actually used the original blueprints and built it brand new.

Yeah, have to admit this looks really nice. In my country we don't have such expansive flat (grass?) filled land, so it is pretty incredible to see that too!

Judging by its speed, you would feel for a while. :-)

Oh

@Scott Crawford he'd just take it through the woods cutting down trees? That's nuts

E fogo 🔥

If anyone can save this country from itself it is the innovative, hard working folks like these.

He got Si as his profile pic 🤣

It's true. you look at videos of people in the third world taking a bunch of junk and rigging it up into useable stuff, or making their own parts by hand for old equipment from the 1950's

We can atribute what we AREN'T to Nixson and Johnson and that era, when they usured in the "Open Trade Agreement" and the government forced our companies to share TRADE SECRETS with foreign countries and Forced our companies to open companies in other countries !!! The LABOR rate, is much lower in other countries and the items could be made cheaper there. Our country LOST our importance in trade and most of our manufacturing plants are CLOSED !!! Little towns, that were based around those plants, are still like ghost towns now, where they WERE bustling, back in the day ! The jobless America is directly due to that mistake. Shortly after that, the government forced the Metric system on us! Most stuff we used was QUALITY MADE, with good steel and had MADE IN THE USA stamped into it. Now, most if our stuff is made where quality is substandard and quantity is peak !

​@@general5104 The random usage of CAPS LOCK and the overreliance on exclamation points!! denotes you as a quack

Would've been great to feel the earth shake and smell the combination of the tractor and fresh earth it's less than 2 hrs from my farm and that day I was in the hospital after a spinal surgery begging my Dr to start teaching me to walk again because I needed to be home with my kids and taking care of my farm and critters

@@davidwoermansr I hope the surgery went well. Done properly its a life changer.

@@BigAmp well I've had 16 more surgeries I can bend at the waist nod and shake my head everything else is pretty much solid but I'm still hobbling around some days I need a cane it's almost to the point of a walker in the winter the arthritis is so bad but I'm still working and farming 1 of these days I'll have to start using meds for pain but the longer I can go without killing my innards the better

@@davidwoermansr You're a fighter and have a positive outlook and thats how you need to be no matter what. Its all about what you can do, not what you can't. Avoiding conventional pain meds is good because they sure do f**k with your internals and with your brain as well. Hope you get relief one day soon. Backs are strange things. It depends on what the problem(s) are but sometimes they can come right all by themselves though surgical intervention should never be discounted either, provided you trust the surgeon. If you do need pain relief I would suggest trying natural things first (like medicinal marijuana or derivatives there off). All strength to you.

@@BigAmp I fractured several vertebra and herniated and bulged several disc and compressed almost all the rest in a wreck in my early 20s I had a lady with a car full of kids run a stop sign in front of me hauling an overwidth overweight dozer so I piled the semi in a deep ditch full of tree stumps at 65 mph because if I was going to kill a kid I was going to die too I wouldn't be able to live knowing I didn't do everything I could to save a kid I grew up watching my grandma in a wheelchair since I was 5 someone tried passing the car coming at her and hit her head on she refused to be labeled disabled she was differently abled and I ran with that I also use alot of home remedies like she did the juice in wild lettuce has been used as a pain medication since the early 1900s probably earlier than that it's comparable to the relief you get from morphine without the high or side affects and it doesn't eat you away from the inside out or rot your teeth out (although I lost most of mine in the wreck) I have her book of old home remedies that became more common during the depression it's surprising how many plants most people consider weeds and spray to get rid of are beneficial and have medical value I've only gone in for surgery when I'd lose feeling and couldn't walk or control my bodily functions I wasn't ready to wear diapers we grew up looking for the positive in every situation my grandpa always said if you want to go looking for sympathy you can find it right where Webster put it in between shit and syphilis so just be happy you're alive and not deep in either of them trying to find sympathy if that's the only positive you can find those words will sure shut down a pity party fast and make a person reevaluate their thinking grandpa came from Germany with a number tattooed on his wrist he had no filter and no time to feel anything but joy

Repent to Jesus Christ “Gracious words are a honeycomb, sweet to the soul and healing to the bones.” ‭‭Proverbs‬ ‭16:24‬ ‭NIV‬‬ H

Many of our ancestors would have called us mad, but I just watched a video on a 3.5 inch screen and could hear the power in that machine designed, fed and stoked by the same kind of people that created the reality to hear, view and record it from anywhere on our planet. I am joyful to be a part of those acting as stewards to our world. The nature of man is a wondrous chaos.

@@repentoryouwilllikewiseper8741 Your god is false

I couldn't agree more

Well said. This is precisely what we all feel when watching these old engines.

ye, it does 1 week of global warming in 1 hour

@@nagulanm3502 what a unintelligent comment! A dozen cows or horses will out carbon this old girl in a few weeks...maybe go shoot a few more of them!2

@@nagulanm3502 heavy carbon and sulfur is good for the soil now that sulfur is out of the diesel fuel farmers spend big bucks to spread it on their fields in the form of fertilizer

@@johnnyappleseed738 since when did cows and horses start to shoot smoke outta their ass?

@@nagulanm3502 - so does all the speeches from our president and congress... but at least this is entertaining

This is one I wish had smellevision

That power sounds like some instrument (music).. not anything like ROAAARRR!!! It didn't surprise if it's hydraulic driven, but at the time, gears and belts (chains too) used. Does it have just some 2 or 3 speeds? I could imagine it have backwards 2 speed and 4 to front or then it's really some oil turbine torque converter, still I can't think that option for this. Convert heats when you have something like this. Electric drivedrain and it same time do much more would be best even simplest way to made, but again, no change it would be the case in here. Because it drives so clean, this is finest what I have see ever AND it could made real job efficiency. If you don't have right to repair your own machines, this would be impossible. Nice thing it's museum quality, could function still for real jobs and not going to run away because scared what they thinking to install back of it. Those metal wheels could maybe pack the soil less than rubber ones, so wide and equality take grip. Gummy tire "rolls" because air or water inside and it could press eart more, because side of tire tracks are (not sidewalls) are shorter (r) and then middle section press soil sometimes unpleasant.

How much would one of these cost back in their day?

@@cripplekid0902 About three trainloads of Bituminous coal.

That’s the beauty of steam. All torque all day. The only thing that offers the torque curve of steam is an electric motor, which can be powered by a steam turbine ;)

Exactly. They had hard lives and lived close top a hand-to-mouth existence. Very little food was wasted. Look at us today, Covid has slightly affected the supply chain and people bitch if their specific fave type of strawberries aren't plentiful. I love taking internet-raised kids to steam museums, it amazes them. Jan Leno described showing modern kids thru his car collection. He took the interior paneling off a car door and showed them the pre-electric rack & pinion device for raising & lowering the window. Said they were utterly rapt, playing with it for an hour.

وؤئثئ ٣٢ببق٣٢

@@user-xk2es1yx1wI'll kjjikmj

overpop > depop

Hl

@@user-ss7yr8nv2q Hello bumba

They are pulling with this huge steam powered street locomotive 🚂 I Wish I train like That in my back Yard.

Not really

Yeah, I bet they were real happy when the leading cause of death in women was childbirth, ear infections killed babies on the reg, and smallpox ravaged Humanity like a mad god. Sounds really fun.

@@joeis18 They were still happy. You can list off modern issues that sound just as grim, the only difference is everyone has a much more "comfortable" life. The fact people back then were still happy and fulfilled despite those issues says a lot about the human spirit. They just accepted how things were and moved on, the same way we do today.

Oh man, I have been "horse" when we install rootet potatoes underground to hide and other man controls that two men blow how deep it took and pushed it same time.. soil was nice. Every year we installed new potatoes there. Ofc we took some 10 from 1 seed pot up when time was right, end of summer.. now growing joints is better business. ;;)

well said.

Socialism now that sounds good.

@@waynegretzky3895 Are you joking?

@@conservativeprodigy2604 never.

@@waynegretzky3895 Socialism is terrible. Not to mention it has failed in history consecutively

It's all that coal he has to shovel 😆

🤔

No computer chip and you don't have to worry about a flat tire!

@@ericsweat9917 no software whatsoever to worry about

Damn right

Amazing👍😍🤩

@@isaakgiddens6090 54bhhhhhhhhhhhyhyythhhhjjìíuj