Another good Vid. I just ordered Barkbusters from 3D Cycles but I like yours better. Looks like Kawasaki really made these electrical upgrades nice and easy for us.
I can't get the black cap on the end of the handle bars off!!! I got the screws out that were loctited in there but the black piece is stuck like chuck on both sides. Any help is much appreciated
Not sure maybe just give it a good wack? Once the bolt is out of the end there is nothing else holding it on. Most of them just come off with the end bolt
Am I understanding this correctly? I plug the $20 relay into the grey connector you showed us near the headlight before, then I can plug my Oxford heated grip into one of those accessory port butt connectors and it'll run just fine? I don't want to take off my tank to run wire to the battery if I can just find a way to plug them into the accessory port. What kind of adapter would I need to plug the Oxfords into the accessory port? I have the Traveller model as well. Any direction would be very much appreciated!
If you don't plan on putting on aux lights on you can use the lead in the right faring for your grips. They are literally all the same. Unfortunately the one that is made for heated grips specifically is under the tank. If you have a traveler model yours already has the relay and the other port already have power to them.
@@2talltimadventures That's good news! What kind of connector do you recommend I use to connect the Oxford controller wire to the accessory port? I'm a noob.
@@zero_appreciator I clipped off the oem one on the bike and just went with simple bullet style connectors. You can use blades or anything really. Just don't twist and tape...lol
Cut that bolt on the bottom of the left hand controls down! I got a 2022 KLR and that bolt chipped the paint on my tank the first time I went full lock to the left.
