Very clever zip tie trick. I have a 22 klx300sm 12k miles. I took a pair of pylers. And slightly expanded one end of that spring for a friction fit. Works great so I thought I'd share. Be blessed
I opened up the diameter of the oil filter spring with needle nose pliers on the end that goes in the engine til it stays in the notches. And by the way I have lived in Arizona for years and was thinking that I kind of miss the sounds of the insects from when I lived in the midwest. Weird, I know.
If you use a rag with brake cleaner to clean off where the spring rest inside just the smallest dab of grease will hold it in place easier to have the filter on the cover and just push it straight in. Why they never placed a mark on cover I'll never know because I'm sure if it's placed 180 degrees off it would be catastrophic.
Dab a little bit of Vaseline and the spring will hold sideways but you gotta be quick with it. Once you get it you can bounce the filter with your finger to make sure it’s got tension on it in the middle there. That’s what works for me.
Just put a dab of grease on the bottom of the spring and you’ll be fine What’s wrong with me I just love watching oil changes it’s like having a brand new bike Nothing like fresh fluids
Oil should be changed when moto is in level not on kick stand. It was not drained all oil and if oil on kick stand is more than bottom of glass it is too much and it can make unwanted pressure in engine.