2024 Guns Modify HK 416A5 MWS Level 2 GBBR Review 

yes thats right

One I'm definitely excited to get!!!!

If the scar can be modded to take an acr stock, I will get one for sure

Haha, 🤣 lol, I'm well into my comparison video for the mws clone platforms, so it should be finished soon, so stay tuned.

I have both! the GM trigger and bolt is a lot better quality in terms of material. That being said it performs similar range as my DE, and my DE actually has tighter groupings than my GM. Unfortunately my GM 416 bolt catch already broke, but GM is in the process of sending a warranty replacement

@@brandonlam3365 wow. DE has tighter groupings despite being half the price of a GM? Makes me feel better for having bought 2 DE’s. Have a GM URGI in the cart pending the comparison vid. Glad to hear GM has warranty support though odd that the catch broke. Always wondered if OEM’s actually do anything without a lot of pestering.

Hi there, the bolt is looking good when compared to a normal marui mws. With the extra roller, the bolt cycles more evenly reducing excessive wear. There will always be some deformation as the bolt is made of zinc, and the hammer is steel.

@@MiddleAgeGameruk thank you!

Hi there, yes, you can remove the handguard, I'm currently looking for the Angry Gun delta set for TM MWS for mine. I will hopefully do a short or something on it as soon as I find one in stock.

Hi there, as far as im aware, yes, the main reason for the 416 coming out last was the receiver, handguard, and buffertube design.

Hi there, with this replica, no, it can't, sadly, but with it being mws spec, if there's a trigger pack that can for mws ARs, then you can just swap it out for your favourite.

Hi there, sadly, no, you can't use the GM v3 mags as they are designed for the TM MWS system. If you're looking for the P-Mag look, then try the VFC V-Mag v3. They will work and have the same look.

@@MiddleAgeGameruk thank you so much. no worries, glad you have the knowledge and I didn't spent the money for nothing 😉

Aaaah I had no idea that there is a VFC mag available, thank so you much. I just had a look for it and found it online... you, Sir, are better then my google search 😄

The GM mags are only for mws. If you wanted a pmag for the vfc go with their vmag or get g5 Ghk mags and file down the valve some

Thank you.

Hi there, i got my GM HK416A5 GBBR from WGC and they too advertised no trademarks. as you can see it does have them. its down to legal reasons, very similar to the mauri issue here in the UK with some sites claiming to have removed them.

Hi there, for sure I'd use wgcshop.com, as for the mags before you order, just send them a message, and they will confirm if their mags are the v3 for you.

@MiddleAgeGameruk Thank you so much for the amazingly fast response. Also, would you recommend the MWS NPAS by RA-Tech for this?

Hi there, the ra-tech npass is the one I fitted. It is a bit of a chore to set, but it does seem to hold the fps, ok. I am waiting on another npass to arrive, and as soon as it does, I will post a short of my findings.

Yes, it's not too difficult, and there's plenty of videos to help.

@@MiddleAgeGameruk Hi which website did you order yours from, as everyone I have seen it is sold out?

I got mine from wgcshop.com, hope that helps.

Hi there, I got mine from wgcshop.com

Or compatible with each other

Hi there, the tm trigger was the standard for such a long time. With the GM v4 trigger group, it is a light smooth pull after a small braking in period of about 500 rounds.

Hi there, I'm currently in the process of testing some different handguards and will do a short if I find one that I like and fits!. A genral rule in the meantime is to use MWS spec.

Hi there, I got mine from wgcshop.com. I hope that helps.

@@MiddleAgeGamerukdon’t they get stopped as Customs?

Hi there, yes, you will have to deal with customs who will add fees to pay. The fees are approximately 20% of what you paid for the replica and add another £30 for the paperwork. All this should be smooth as long as you give the retailer your UKARA number at purchase. Hope that helps.

Hi there, for stocks, it fits gbb/mill-spec. As for handguards, you want ones that war MWS spec, and generally, they come with their own barrel nut to secure it.

@@MiddleAgeGameruk Thank you for your reply. But if they don't, it should be a fit right? I mean, from the VFC one (which I have), the Geissele one is a drop-in fit with 0 extra nut needed. However, I do know that some of the MWS specced handguards require the EBB version for some reason. I don't know if this still require me to get a different nut in, instead of the default one that's already on it. But I'll keep it in mind. Cheers!

There are no specific AEG or GBB buttstocks, there's only a difference between milspec or commercial spec, they differ in internal dimensions. Pretty much all airsoft rifles usually come with milspec buffertubes (narrow ones) to fit both specs - commercial spec (wider) will fit on milspec but will rattle. As for rail repros it depends on the make, with 5KU Geissele copy you'll need to shim the barrel nut. With typical MWS rails the issue usually comes down to the barrel since the "collar" that the barrel nut grabs is very narrow on Marui barrels. With aftermarket barrels (this comes with GM barrel) it's not an issue, they're designed to fit standard AEG handguards. Again, the fitment depends on the manufacturer, some fit without issues, others don't.

Hi there, I got mine from wgcshop .com, hope that helps.

Hi there, it's a great option. There, URGI gbbr is a great choice. Most of the normal internal upgrades are already done for you.

Thank you, by the way nice videos really informative!

Hi there, I got mine from wgcshop.com, but here in the UK, I believe hpa Airsoft has them in now.

You already have 3 you are insane

@@AlvaroCobain1995 maybe four it´s fine 🤣

Hi there, the sling point is just a cool steel one from Amazon. They go for £10 - £15, so not too expensive.

it's because people don't want to scratch their 500-600 euro replica when attaching the sling

Hi there, I haven't had that issue, I would advise sticking with the gm Gen3 mags as they are really good.

@@MiddleAgeGameruk yeah, I already replaced two new nozzles after shots 3 tm mags 🥲. Still dont know what happened 🙂‍↕️

Hi there, yes you can. With vfc, the main difference is the firing pin setup, and it's the same for Guns Modify MWS bolt carriers.

Hi there, the GM hk416a5 uses a marui spec gbb inner barrel, and the one installed is standard 6.05mm and full length.

@@MiddleAgeGameruk ohh okay awesome! i just got mine so im excited gonna prob upgrade the barrel ty!

Hi there, the full cnc version was a limited run and very hard to find outside of the secondary market.

@@MiddleAgeGameruk Sounds good, would you recommend this GBB as a good indoor and outdoor rifle? Also what internals would you recommend. Been wanting to get into air-soft and the HK416 and MK18 have my interest at the moment. I’ve heard good with the MWS system and noticed this has it so it caught my eye. Was curious if you recommend it as a first time buyer.

Hi there, the GM HK416A5 is an amazing gbbr and upgraded out of the box to a high level. It shoots close to 400fps with .2s out of the box, so a good start there for outdoors. The one thing I did was install an npas so I could turn down the fps for indoors. The Marui MWS system is a great starting point, and there is over a decade of aftermarket support for the platform, and it will continue to grow with you as you expand your collection. For people who are just starting out, though, I do recommend the Double Eagle Noveske N4 mws gbbr as it comes with a steel firecontrol group as standard and magpull clone furniture, with a £349.99 price tag you can easly use the rest to upgrade it to your personal preference and get a few good gm mws mags. The choice is yours, but remember when buying parts to make sure there for the mws platform. Hope that helps.

@@MiddleAgeGameruk You made me fall in love with this platform lol I might have to stick with this one. Through my youth years and growing up with no money I looked up to guys with these kind of rifles. Now that I am older and have the opportunity to afford these things I want the best bang for my buck! But I had a question if you don’t mind me asking. GBRS not sure if you’re familiar with them but they have a sight that I would like to purchase. It’s called the “hydra mount”. I was curious if this GBB can hold such mount. Thank you!

Hi there, yes, the rails on gbbrs, for the most part, are milspec, and I know several friends who use such mounts with no issues.

No

Hi there, it will set you back the same as the latest Tokyo Marui URGI MWS gbbr at around £630

Great suggestion, and it is on the list .

Thats why i watch about 30 seconds and go about my way😂

Ghk is ass except externals