In this video we compare the Marui MWS ZET system to the VFC Mil-spec/ Mil-sim system and try to find out what is the best GBB system for your first GBBR.
Thanks for taking the time to break the guns down! I already ordered a VFC but Im happy with my choice as we want to be as close to real steel as possible!
Great review! I would point out, though, that you definitely don't need to clean/relube your gun after every game if you are using proper ptfe grease. Unless you are shooting like 2k rounds a game.
Im just throwing this out there, been playing for over a decade and got a KWA 416A4. Uses LM4 mags but new hop up, and bucking and for a stock gun it's been a hammer. Shoots a bit hot, but for a gun that you only need to slap a barrel in if you want and bucking rubber it's pretty awesome. None of the old LM4 problems
I have some VFC AR models and others from VFC. Cleaning after a few games is not necessary. They run and run. On some models the hopup is not so good but otherwise no problems. I'm glad I chose VFC. BTW nice video.
Not sure if you are already doing it but I do recommend using a ptfe grease instead of silicone. The silicone tends to displace easily and gets into places where it really shouldn't and causes a need for more maintenance than necessary
@@aceace6001For me Super lube sells PTFE grease and synthetic silicone oil. If I want a smoother feel I'll do half silicone oil and half PTFE grease. Otherwise Super lube PTFE all the way
Get TM shoots well, smooth cycle, efficient, works every time. Get VFC for realistic milsim experience, interchangeable parts with ar15 ie. Charging handle, buffer tube, buffer, buffer spring & buttstock.
Nice video TM MWS is da best😁 btw I love to support people who put their own money to review this kind of amazing video just like you did👍 Great work keep it up
Honestly, my biggest gripe with VFC is them using epoxy glue on some parts or screws. Just destroyed a MP7 bolt carrier, because the screws were epoxied and made out of butter.... similar with my buddy's G3, where they epoxied the nut holding the gas tube to the front sight.
Hi there, the mws buffertube will fit milspec stocks, but depending on the manufacturer, the amount of wobble varies. If you're still not sure, then you can swap it out for an Angry Gun buffertube for mws that's one piece and milspec. Hope that helps.
Hola, depende de qué tan realista prefieras tu réplica y si la usarás en exteriores o en interiores. Si es realismo, entonces VFC, si es en interiores, entonces Tokyo Marui.
I dont care what anybody says gbbr was meant to be as realistic as it gets. Reliability of course you want that but if you go by tokyo maruis thinking an aeg is or hpa is the best gbbr. Cause Reliability
I have 6 - 7 GBBR,most of them are VFC products, one is KWA, honestly every single VFC gbb rifle has one or two issues, particularly bolt catch failure, dust covering spring issue. I bought URGI from TM recently although its a bit pricy, here is my comments for TM, 1/ great finishing, 2/ accuracy perfect, 3/ Very solid , no wobbling at all, including stock, 4/ beautiful packing, the only weak point is the coil is not so good as VFC.
Do you have bolt catch issues with the vfc and how is it solved/what is the cause? Is it parts wearing down over time, and if so which part the bolt catch or the bolt itself? This is why I’ve always leaned towards zet system as I value reliability over realism in an airsoft gun I want to game with
@@Wolfman_NV there is no way to fix it, i got the issues when 416a5, URGI, both of them were brand new, i tried all possibly methodology to fix it which learning from various youtube clips, still no luck at all. I have kwa m4 with no issues, I have mws URGI which is perfect.
@@tseyou5981 that’s troubling.. thanks for the reply. With my old lm4 it was always the bolt wearing down where it catches, only way to fix was getting a new bolt. Are your 416 and urgi v3? Was hoping it might be sorted with the new gens. No one seems to talk about it much but sounds like it’s still an issue..
Hi there, due to youtube new policy, I can't give you direct links, but a good place to start is defcon airsoft or daves custome airsoft if you're in the uk. If you want to import, then wgcshop. Hope that helps.
I have a double eagle n4 and so far I’ve had to spend a few quid to get it to work first problem was the hop unit was constantly getting stuck had to change it then I had to buy a new bolt cause of issues I’ve had to buy 2 nozzles as they both broke and now I’ve had to replace the whole trigger assembly due to issues my opinion just buy a Tokyo mauri mws is going for the zet system don’t buy the DE version
Hi there, the mws system is great for people wanting to get into gas rifles. The vfc is more for people who favour realism. Both are amazing. It's down to the individual preference.
TM is in a paradoxical existence. They managed to patent the ZETA gbb system with the WTO but theyve been stuffing that system in products featuring unauthorized trademarks
@@pyroromancer I’m not mad about “unauthorized trade marks” lol. You seem to be tho. *Pokes with TM MWS with unlicensed trade marks just to piss you off*
Yea idk what this guy is talking about, all of my stock tm mags have been amazing, 4 years with countless 1000s of rounds and all I’ve ever had to do is clean and relube maybe once a year if they develop a leak and they’re good for another year of abuse