2024 YAMAHA WR450F - GYTR Hydraulic Clutch kit instaling

Подписаться 5 тыс.

Просмотров 9 тыс.

50% 1

2024 YAMAHA WR450F - The GYTR Hydraulic Clutch Kit is specially tuned to optimize disengagement zone, decrease lever load and minimize maintenance. Self-adjusts to clutch heat and wear in all conditions to eliminate the need for manual clutch lever adjustment.
OEM part number: BHR-F63A0-V0-00 @RSWR450F
Full story: www.rajce.idnes.cz/rswr/album...

Авто/Мото

Опубликовано:

1 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@DailyPlay01 5 месяцев назад

Dude, I'm tired of waiting for new riding videos of your cool Yamaha wr 450 2024 from you, please release your riding videos

@danarussell4246 5 месяцев назад

Since I got really old I finally went Rekluse auto clutch on my last 3 off-road motorcycles. Awesome in the really technical riding sections like rock gardens.

@RSWR450F 5 месяцев назад

Yes, Rekluse clutch is very good option 👍

@JoChr 5 месяцев назад

Pekne 👍👍👍, už aby začala sezóna

@roo450 5 месяцев назад

nice 👌🏼

@Pajero.m57 5 месяцев назад

Nice upgrade ! Is the engagement smoother than with the cable?

@RSWR450F 5 месяцев назад

works very easily and smoothly 🔝

@Pajero.m57 5 месяцев назад

@@RSWR450F great! Enjoy your ride🤟

@witos1753 5 месяцев назад

In my WR450 2024 I installed one thinner clutch disc and lengthened the lever in engine. Runs as smooth as butter.

@Pajero.m57 5 месяцев назад

@@witos1753 in my 2003 250 yz, i installed some spacers over the clutch stud, it decrease the springs pressure and it helps

@witos1753 5 месяцев назад

@@Pajero.m57 i new Yz and WR the clutch have plate spring do you cant do this anymore 😉

@Riskyyz 5 месяцев назад

Hey bro can you do a video on how to uncork the 2024 wr450. how to get to the throttle stopper screw

@RSWR450F 5 месяцев назад

Instruction: img41.rajce.idnes.cz/d4102/18/18839/18839300_9cc3c42b7acbd95c8825400ad66cd7d4/images/DSC05755_2.jpg

@Riskyyz 5 месяцев назад

@@RSWR450F I see the bolt I need to take out but I can’t get to it the frame is in the way like I can’t grab the bolt with the torx bit is there any other way to get to it without pulling parts off the bike and I have the 2024 wr450f

@RSWR450F 5 месяцев назад

Same system remove throttle stop screw (time 3.54min): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--yYPfOJzx9w.htmlsi=7hstGkmJ7RrzNjdy

@Pajero.m57 4 месяца назад

@@RSWR450Fthank you,👍

@mark.mahorney 3 месяца назад

@@Riskyyz make sure you got the special torx bit with the hole in it, it's a security torx. You can get it or with long bit driver extensions between the frame and the wiring, barely but you can get it that way. You can cut off part of the screw to get more throttle or you'll get a new one with the gytr tuner kit if you go that route

@Beast_GM24 3 месяца назад

Ahoj. Som nahodil aj ja tu hydrauliku ale strasne je to makke a nemam pocit ze to chyta, a dost tazko sa aj odvzdusnovala, tebe to slo v pohode?

@RSWR450F 3 месяца назад

Odvzdušnit to jde velmi dobře, ale musí se sundat víko pumpy, dole na válečku povolit odvzdušňovací šroub, na něj dát hadičku a stříkačkou tlačit brzdovou kapalinu (BREMBO RACING LCF 600+) nahoru do otevřené nádobky. Páčka je tuhá a nastaví se dle potřeby šroubkem, já mám spojku nastavenou aby zabírala hned na začátku a ovládám jedním prstem.