#22 Husky 32215 Centerline TS weight distribution hitch. Installation and first impressions. 

Thank you for sharing, good content on this one. One question, how do you take the hitch off with the spring load bars attached?

This is the best video ive seen so far on this hitch, thank you.

I just got my first anti-sway bar, I haven't installed it but watching you do it made me feel better about it. Thanks.

Only needed 1 minute of this video and it helped me out. Great video

Yeah, your video was great, very helpful. I bought one of these about 5 years ago but I didn't set it up correctly and my last truck sagged. Bought a new truck and I need to readjust it to fit and I realized that it is a weight distribution hitch and it hit me like a rock. Your video was 👍 and helped me out a lot. Thanks

Thanks for this video Ed. I literally just ordered the same hitch and once I get it will be installing it onto a riverside retro 135 camper (dry weight 2,540) and will be towing it with a 2013 Toyota Tacoma 4x4 w/tow package (6,500 tow rating). Like you I went back and worth about being better safe then sorry and decided to get this to prevent any sway on long distance camping trips. I feel more comfortable installing this thing now after watching your video so thank you.

Nice job, Ed. I always wondered how those hitches worked. Now I know. Thanks for taking us along. Cheers!

Great information, clear and concise. I just bought the same hitch and was a little unclear about a couple of steps. Your video cleared it right up! Thank you!

Gonna try to readjust my WDH tomorrow since I’m 99.999% sure the shop I bought it off installed completely wrong. Thanks for the tips and info

Straight forward and easy to follow instructions. Thank you for taking the time to make and share this video!

Great video best so far , I was trying to understand the rear adjustment that the bars go on top of ... now I know.. thank you once again 👍

Thanks for the great video, I'll be installing this WDH today. Additionally, I like your idea of measure from the front and rear of the camper frame just incase we are not level with the earth.

Very nice. I have the same hitch. This helped me through the process of hooking it up after a few years of not using it. It certainly jogged my memory! Thank you

Great video! Thanks for easy to follow instructions. The manufacturer should include a link to your video in their instructions.

Instead of using that bar tool to lift the bar into the trailer cradle, just lift the trailer with the tongue jack until the bars are completely unloaded, remove the pins from the truck end of the bars and slide the bars aft. Really fast and easy, plus less time running the jack.

Thanks for the demonstration, sir. Ready to tackle this job now

I like my WDH it makes a big difference on bouncy curves an highway speed and helps on windy days too. Also gives me more confidents and less stress on long drives. On my truck you can feel the extra weight distributed to the front steering axle. Thank you for another great video Ed ! Just my 2 cent but a travel trailer should be sold with a WDH and sway control as standard Equipment.

I know it's been A year ago when you made this video thanks for it! I have learned A lot from this Awesome!

Awesome new video sure to interest lots of viewers !!

Just picked up a used one for $150. Glad to see such glowing reviews of it. Going on a SR5 4runner. Looking forward to getting out after this extended lockdown.

Great video thank you. We are switching from a 4 runner to a Tundra with the same hitch and I need to swap the hitch. Very helpful and entertaining video.

Thanks for the video Ed. I have a higher weight range model of the same hitch and need to swap it over from one truck to another that are different heights. So this video is helpful for me to reconfigure the setup for the new tow vehicle.

Good evening Sir 👍 If Marie Ange had saw this spider, she will probably get airborne in the sky and at the same time her voice will generate a high pitch sound enough to freeze my inner brain cerebrum 🤪 That is a great and very strong weight distribution systems and saw systems for your RV 👍When your cross a big bridge you like it very much not having the front end bouncing 👍and great to keep the RV strait. Have a great week Sir Cheers !!!😊👍

Great Video Logo Logical and definitely on me level. Cheers from Australia.

Morning Ed! That was very interesting and helpful. I have never used one either but now I know it works and how it gets installed. Nice! Good job! All the best!

Thanks, appreciate Rule #1 review.

I have the same hitch for my Ford F-150 supercrew. Just got it when I bought my new camper (Rockwood Roo 233s) a few weeks back. My hitch was installed at the camper dealership but seems to work well though I definitely know I’m towing the camper as I can still feel a little sway. Though I’ve only used it a little so far, it seems critical that your vehicle and trailer are level when hooking it up and unhooking the camper. Otherwise the sway bars won’t hook on or come off easily. Thanks for the video.

Great video! I feel better about trying my self now!

Thanks for sharing your experience with this setup. Just a little feedback -- I was hoping to see is how the brackets attach / were installed to the frame. Your video just shows them attached, would have been nice to understand how they are assembled. Thanks and keep up the great videos!

Its a good hitch. I'm very happy with mine

You are in NJ and can’t find a bumpy road?🤣 just cross the PA line you will find a bumpy road immediately. Great video I am considering this weight distribution system.😁🛫

thank you for the video your explanation was the best help ever

I have the same hitch on my mini lite 25 and tow with a 2014 VW Touareg. Love it but very very noisy on turns. It may scare people in the neighborhood thinking the trailer may fall off! LOL But a great product once you get used to the noise. My plan is simple: bars last on and first off. Let the tongue jack do the work for you.

Very helpful! Thank you!

you need to add more washers to the pin on top...it will help with lift on the spring bars.....

I have a 2014 Silverado,thanks about Air conditioner problem,condenser is the most problem on 2014 chevy truck.

As a math teacher I had a problem with your decimal. Other than that - great video!

great video learned some new stuff, thanks for sharing!

I ordered mine on Amazon. It exploded it's box, I found it in a few piles on my porch, LoL

Great video. Thanks!

Ordered the same one (32216), should be in two weeks.

Great video!

You did a good job showing how to install this hitch. Thanks. I understand how it distributes weight to the front truck axle, but I wish someone could explain (so I can understand it) how this design controls sway. I still use an older Reese sway control WD hitch with cams on the ends that push against and bend the spring bar when the angle changes between truck and trailer. I understand how mine works. I believe that yours does also, but I just don't get how.

I had the exact same A/C issue with my 2014 Chevy Silverado. 😢

great video, have the same hitch , went from a 2019 Silverado, to a 2015 Silverado 2500 with a 6.6 , so your video really helped , thanks. bill from myrtle beach sc

bolts were the other way in my manual

Thank you very informative

A couple corrections 1. You don’t use those hardened washers to set the height of the ball. How many of those are used is determined by the frame size of your trailer. Typically two washers for a 4-5” frame, 3 washers fora 6” or bigger frame. That angels the bars appropriately based on your frame size. You set the height of the ball 1” above your hitch coupler but you do this with the different slots of the hitch. 2. You use the 2 black compression washers on the top bolt, not one on each bolt like you did.

your leverage bar fits in the square hole on the bracket .

I just had this hitch installed on my KZ 180TH toy hauler and my Nissan Frontier. It seemed a lot easier than the Equalizer that I had on my F250/travel trailer. The stabilizer arms were a pain in the butt to deal with. I drove about 1500 miles from San Angelo Texas back to my home in Vero Beach, FL. The Husky appeared to work well, but toward the end of my trip, that horrendous "metal on metal" sound kicked in. It sounded like some type of African animal bellowing a roar. Very loud and annoying. I'm going to go with some lubrication the next time I go out and I'm open to suggestions as to how to minimize the noise. I was told by the Tech that installed the hitch that there should be a 1 inch differential between the top of the ball receiver and the top of the ball. BTW, I think the ball measures 2 5/16" versus 2". UPDATE: I took my KZ 180TH back to a local dealer to install a power tongue jack and I was told that the weight distribution hitch setup was not done properly by the original dealer, which caused the horrible metal grinding sound. ALWAYS drive your camper BEFORE you leave the area in order to test the hitch and adjustments can be made. I was charged $ 75 or 1/2 hour to make the correct adjustments and the selling dealer reimbursed me after seeing the pictures taken to correct the original install.

Cool video. Are you in Mississippi? Sure looked like it.

Is it noisy when turning, and do you have to unhook the tension arms to back up?. Thank for the video, I’m gonna check out some more of your videos.

Great video, thank you. My dealer said I can go in reverse with the bars on. Have you noticed that?

Hi, liked your video. Just curious if you can swap the spring load bars? From 600-800lbs to 400-600lbs using the same assembly? Thanks

USPS limit is 70 lbs. Ups is more.

I'd like to see video of the hitch when you turn

Can you clarify the use of the j shims. The instructions seem to indicate that they only go in the gap on the lower bolt

First page!? You had a nice teacher, Mine made us read the first three chapters! So, do you have one of those for trailering your tractor also, or can you buy additional brackets?

Excellent video thanks! I just purchased a Wolf Pup ~ 4000 lbs dry and wasn't sure I needed this but you convinced me. One thing I don't get is how hard is it to take off once you are setup at campsite? Also, its been a year, in that time did you notice an improvement in sway?

Note: The weight distribution hitch will give better steering authority, but it will NOT make up for bad balance of the trailer.

Did you load your camper with water etc. ? Great video. Thanks.

Thanks for the video. I have a question about this compared to chain style. Once you set it up can you adjust the bar height if you use a different vehicle? The chain system is easy to adjust, just use a different link.

Thanks for the video. Still happy with the Husky? Looking for a replacement weight distribution/sway control.

That wasn't IRISH SIRI, LOL ! ENGLISH SIRI is more like it ! Lol, but close enough ! 😁

Will the hitch brake if the vehicle is going’s through a big valley turning into a gas station and the back of the trailer drags? The vehicle and trailer make a “v”.

You said you didn't need any washers to set the angle of the ball head, how did you come that conclusion? Thanks in advance.

Great video thanks. I’m currently installing but need additional tools. What size sockets and wrench did you use fir the hitch ball and hitch? Also how did you rest the ball mount on the shank in beginning? Thanks.

One other question.... apologize if it is dumb. Manual says it only fits 4,5,6,8 inch trailers?

How’d you know how many washers to place to give you the proper seating? Or are they just used to adjust in increments smaller than the space between the shank’s holes?

Question: The instructions do say to torque the bolts to 350 lbs. Did you have a torque wrench rated that high lying around or if not, how did you do it? I bought the same wdh and plan to install it myself, but only have a torque wrench rated at 150.

I have the same year truck, I had to have condenser replaced along with an oil pressure solenoid or something. Thankfully all under warranty at the time. Have you towed the Kubota with it?

Hello ... I do have the same system .But pne of my torsion bar is extremely hard to swivel to put it in place I need to use a tube as a pry bar ... Is there a torque spec for those ? Thanks

Is the hitch ball leaning too far back? Seems like you could lower the hitch down a set of holes and tilt the ball to stand up straighter.

Ed great video . How did your get your torque to 350 lbs on the hitch ? I really don't want to spend 400 bucks on a super duper torque wrench

Was you measuring from the ground or from the top of the 6x6 block

We just got this hitch installed by the dealership where we purchased our trailer. Seems to work great, however it is loud when turning forwards or backwards like something is going to break! Is this normal?

Question do you need to take anything off before backing up the tráiler ??

my hitch makes a lot of sounds while driving down the road. What am I doing wrong?

Have you or anyone on here broke the l brackets that is on the trailer that the bar slides on? I have broke 2 on my driver side and trying to figure out why? Husky told me I must have had a bad mold but that seems a little weird to me that I broke 2 of them so far

what measurement did you put the brackets at on the tounge? 30"?

I have the same setup. It's super noisy on turns. Are you getting the same thing?

My gmc 1500 denali, can tow a 14,30 lbs 40 foot travel trailer, because of the husky tow hitch.

How do you remove it??

What size and weight is your trailer that you pull with your 150?

Mine came with these washers with teeth.

Mine squeaks and grinds and makes terrible sounds when turning .😒😒

Is your Husky incredibly loud?

Don't think the front is to be lower than your height with no load. You may need to remove a washer.

I use Google ...

Get a Tundra