24 Polaris Xpedition accessories and modifications, impressions after 500 miles

Подписаться 54

Просмотров 11 тыс.

50% 1

I have had my Polaris Xpedition for 500 miles now, I have added the accessories that best fit my needs and how I use my machine. I am sharing some of my thoughts on the machine and how I use it, and how the machine fits the needs of me and my business.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@antiferous 21 день назад

Nice job on that front rack light down low. I mounted one on top, but that low light looks pretty useful.

@jim87vette 2 месяца назад

Good job on the mods. Like the mud flap idea. Noticed on mine all the mud that gets way up in there.

@siliskielandmanagement120 2 месяца назад

I would probably use a thinner rubber for that if I were to do it again. Those were left over from another project, so I used them. It has saved a ton of time cleaning the machine. I removed them the other day to see what had landed behind them and it was only a couple handfuls of dirt to remove on each side. I might cuss the driver side one when I have to change the clutch belt on the trail and have to remove it without power tools, but we will burn that bridge if and when it gets here.

@lloydmarche7263 2 месяца назад

That’s a nice machine. 👍.

@siliskielandmanagement120 2 месяца назад

Thank you

@Hodado 3 месяца назад

Once you start you can’t stop

@JLW60 2 месяца назад

Very nice!

@jameskeith67 2 месяца назад

You should mount some pod lights on the back of your cab to see when backing up in the dark

@siliskielandmanagement120 2 месяца назад

I am considering that, I don't do a ton of riding at night but on the occasions that I do it would be nice to have them.

@CharlieReiter-p7o 3 месяца назад

Nice machine! with that much seat riser is it hard to buckle or unbuckle the seat belt? Thanks

@siliskielandmanagement120 3 месяца назад

I don't use the seat belts, I bought a seat belt blank to put into the buckle and get around the safety part. I bought 1" Aluminum square tubing today, I am going to make my own risers that are a little shorter and see how that works out.

@jasonmiller9495 2 месяца назад

Might as well buy one of those Toyota trucks the terrorist like

@siliskielandmanagement120 2 месяца назад

I am not a terrorist, so I don't have a use for one of those.

@shemikachavis4157 2 месяца назад

Do it hold a lot of heat in the inside?

@siliskielandmanagement120 2 месяца назад

No it does not, the Air conditioning system works really well in this. I live in Central IL where it gets pretty hot and very humid. Yesterday was mid 90's real temp with 100% humidity. I did some fencing along our property line about 4pm and the A/C had no problem at all cooling the inside off and keeping up easily with any ambient heat.

@Travisj9935 3 месяца назад

Just buy a Jeep already

@siliskielandmanagement120 3 месяца назад

I have had jeeps, everything from CJ 7's to TJ's. This stock suspension machine is far more capable than any relatively stock jeep I have had or ridden in. If I wanted a jeep I would have bought one.

@markstoybox2058 13 дней назад

These junks are so overpriced like you said buy a Jeep and upgrade the suspension and then you have a real machine this thing's all plastic in this little junk engine when you can have an actual vehicle I'm lost