3.5inch UltraLight // DarwinFPV BabyApe II // Water Proofing Cement

Подписаться 60 тыс.

Просмотров 29 тыс.

0% 0

Sometimes I am Captain Crash ALot 😁
DarwinFPV - bit.ly/43ktgpl
Banggood - bit.ly/3MObPYJ ( N America Coupon "BGNick2022" 8% off)
BlackBox Logs - bit.ly/3WwFGrN
🔥Daily FPV Gear🔥
► HDZero Goggle - bit.ly/3vznWiX 💣
► Charger SkyRC Q200 QUATTRO - bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro - bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood - bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► RaceDayQuads - bit.ly/RDQ_NB
► HDZero - bit.ly/3GABBfU
► WeBleedFPV - webleedfpv.com/NickBurns
► GetFPV - bit.ly/3rnx05U
► Banggood - bit.ly/BG-NB
► RotorRiot - bit.ly/3N40Ebp
► Caddx - bit.ly/3VL3wyf
► AliExpress bit.ly/3vMbOZK
► Emax - bit.ly/3sn3AGm
► RadioMaster - bit.ly/3ClexPQ
► Amazon - amzn.to/3iJjTrT
► MakerFire - bit.ly/37TAmGo
► BetaFPV - bit.ly/BFPV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 173

@NickBurnsFPV Год назад

I didn't think I was so camera FOV sensitive. How about you? What do you think? DarwinFPV - bit.ly/43ktgpl Banggood - bit.ly/3MObPYJ ( N America Coupon "BGNick2022" 8% off) BlackBox Logs - bit.ly/3WwFGrN

@airdevil21 7 месяцев назад

I think it's a really nice kwad but both the 4 and 6s could use some more powerful motors... Maybe a pro version ;) and it needs HDZERO!!!

@devilsreject78 5 месяцев назад

I put buzzers on every single quad in airplane if I didn't have buzzers on my drones I'd still be out looking for some of them you wouldn't believe how easy it is to be standing right on top of your drone in the grass or foliage and not see it

@minkorrh Год назад

Water 'resistance' = clear nail polish. Comes off with an alcohol bath when you need to work on it and provides decent protection from anything short of a full dunk. Yes, you can submerge your FC in a glass of alcohol. 99% isopropyl.

@Markq666 Год назад

Sounds like a really good ideas hmm

@erikl1003 Год назад

Excellent video, excellent flying. Great to get the full experience of this little guy.

@rp479 Год назад

Darwinfpv products are great. Love the hulk and their smaller aio boards

@johncarold Год назад

Hi Nick Great video and review of the Darwin 3.5in Baby ape. I have thought of getting another Darwin, I have had good luck with my old 3in baby ape, thanks again for the video and information about this quad.

@TK-fp5fp Год назад

Captain Crash A lot 😂😂😂 great video Nick it looks like it'll be fun to fly

@NickBurnsFPV Год назад

Yep, sometimes I just stink other times...like the camera fov keeps me from being comfortable.

@genefoxgreenmountaindroning Год назад

Thank you for the great information

@RichMoore-tweakin7376 Год назад

I can tell by your tone and review it's a candidate for your next giveaway 🤣 Cheers Nick!

@NickBurnsFPV Год назад

lol, yea, not one I would keep. To big without a standout feature that I don't already have covered/

@MrBumbles2 Год назад

yep i fly my v1 everyday and yep runcam phienox and elrs added . great little quad imo. tiny ape changed cam too. which it too i like.

@pandrews01 Год назад

Love the video!! Excellent content!!! very detailed specs as usual. Thanks for reviewing the budgetish quad.

@NickBurnsFPV Год назад

My pleasure.

@justinkelch4837 Год назад

@NickBurnsFPV how do you like the zorro compared to the tx12?

@NickBurnsFPV Год назад

@@justinkelch4837 I sum it up as the zorro is my daily. I prefer the game style radios over square, even small square isn't as comfortable to me.

@Wildest_Wahoo Год назад

<a href="#" class="seekto" data-time="312">5:12</a> - THE TREE MOVE!! 😍

@NickBurnsFPV Год назад

kinda, need more fov to make it easier and look more fun

@MoeFPV Год назад

thats the BURNS TURN !

@jebrc Год назад

wow i really like that im deff gonna start saving for one so come next year feb or so ill be able to order it its the only part im lacking to being back in the air i got some old eachine 2 foam box goggles and a beat up ol qx7 so just need the drone now

@minkorrh Год назад

Oh Mr. Burns.....(Excellent) ....I saw the way you came out of the corner of your house over the pool. The day you toss a quad into the pool is the day you will see me LMFAO. And that's not wishing you actually do it, but I see the hazard, and no doubt you do too lol. Then again, what's $150 these days? You'll always be my favourite pilot even though I'm into bigger stuff. (actually my wall has toy whoop/toothpick to 7") It's your easy manner and allowing us into your space that makes me watch. Always a fan, Mark.

@NickBurnsFPV Год назад

I mainly fly with the pool cover on. It has an "auto" cover. It is motorized and has a switch to bring it out or back off. The switch is behind a lock as well, so the kids can't open the pool without a parent. I have put one quad in the pool during a slow flight about a year ago. It was running frsky and fail safed, bounced off the cement and plunked right into the pool....dead. thank you for the kind words and even coming back to the channel as your interests are in the bigger quads. Much appreciated.

@jwhitaker81 Год назад

Oh, yeah, ordered one today! As well as a Runcam Phoenix. I love Darwin quads for the $ but I have to change the camera every time I buy one. I have a bag full of them, lol.

@jlarson42 Год назад

Great review video. 👍🤓

@NickBurnsFPV Год назад

Thank you

@mark6302 Год назад

i love my tiny ape despite the flimsy motor shafts... currently waiting for replacement motors....

@Sonic_BoomFPV Год назад

Hey Nick, another great vid! I have the original Baby Ape and it shreds. Love that lil thing. I have a question tho. I got an extra Walksnail Nano on the bench and wanted to know what (if any) mods I would need to convert this baby over. Thx on advance!

@MCsCreations Год назад

Awesome flying and review, Nick! 😃 I was talking about FPV with a friend, he mentioned he wanted to try it. And then you posted this video. 😂 I just sent him the link! Anyway, stay safe there with your family! 🖖😊

@cowfangirl420 Год назад

i love those little foxeer lolipops, i use them on my 2s fractal 75 build and they get so much cleaner video than the lil dipoles. totally worth the extra weight

@NickBurnsFPV Год назад

do you have issues with them breaking? I think this is the second one I have broken

@cowfangirl420 Год назад

@@NickBurnsFPV i had a few of the older ones break but never issues with the newer ones

@NickBurnsFPV Год назад

@@cowfangirl420 I do think mine is a bit older. Thank you

@Rocketman0407 8 дней назад

looks a lot of fun. I am a complete noob and made the mistake of buying a IFlight Nazgul Eco as first fpv drone. I figure I need to practice on something smaller and less powerful first so I ordered a Babyape pro v2, Crux35, betafpv goggles and a Radiomaster pocket controller. can't wait. Do you recommend just cruising around some in angle mode before flying in acro?

@ChuckPheltnic Год назад

I wish Darwin fpv did some hdzero versions.

@NickBurnsFPV Год назад

yea, it is surprising they haven't so far.

@arQadjo Год назад

Adding HDZERO (or Walksnail) VTX isn't difficult to Baby Ape V2 like V1, where you have to add 2mm spacers to the top plate to get enough space for digital camera.

@NickBurnsFPV Год назад

@@arQadjo good real world experience here. Thank you

@simonholmes3456 Год назад

Which HDzero VtX would be best suited for this size whip? I’ve just bought a used receiver and plan to convert this drone to HD, any help would be appreciated.

@NickBurnsFPV Год назад

@@simonholmes3456 We would need to use the whoop board as the 1watt would be to large.

@amin0_acid310 Год назад

Got the original Baby Ape Pro. Can't say I've flown it much, I was still really new at the time. Drove me nuts that the original motors didn't have standard motor screw holes or that the top screw holes didn't match up to T mount props. The goofy front end camera cage is steering me clear of this one, I think I saw that the arm are in a V shape, so if you bust one, you rplace two with one piece (Correct me if I'm wrong on this one). Thanks for the vid, even with that goofy FOV, you still managed to shred the backyard. Cheers!

@NickBurnsFPV Год назад

I think the baby ape pro had the wishbone style of arms. I don't think this one does but I would need to disassemble to be sure.

@amin0_acid310 Год назад

@@NickBurnsFPV I sit corrected, Original Baby Ape had seperate arms, the Pro had wishbones. One more strike against my Ape pro I guess lol.

@kaskalo2 Год назад

I ordered crux35. So I thought I might waited for this one. But at the end, I think it is still better

@NickBurnsFPV Год назад

yes. I prefer the crux35 as well.

@flameinthedark Год назад

I wanna wash this drone! xD

@NickBurnsFPV Год назад

what do you mean. The grass bath didn't work :)

@winder6 Год назад

Im guessing its a micro size camera and could you swap out the lens for a wider field of view. Cool looking frame cheers

@Mupshot Год назад

Love my baby ape, after I swapped out the junk camera.

@NickBurnsFPV Год назад

I am hearing a lot of this on that quad. Surely this camera and it’s case cost them more than a bulk buy of some mid range modern camera

@gregorydahl Год назад

GE Silicone clear caulking holds 800 mW vtx and antenna mast securely neatly flat on top .

@kimchristiansen2127 Год назад

hi nick I'm super happy with your videos they've helped me a lot I fly with darwinfpv baby ape pro also I want to hear you I've looked at darwinfpv 2 freestyle or darwinfpv cineape25 I'm not very good at freestyle right now but if you could recommend one of them what should it be or would you recommend another in the same price class greetings Kim

@scu-dub Год назад

I just got the cineape 25 and I absolutely love it! On an 850 it flys on rails!!!!! However I'm a little upset that this is a v2 and is worse than the v1 smh.....

@EagleFPV43 Год назад

I see your vtx is mounted in the bottom. did it come like that? And, since it's a 3 hole vtx, does the third hole in the back screw into the frame for you?

@pinkduckfpv 2 месяца назад

thank you for all your videos! is there any good way to mount something like the runcam 4k? i would believe its quite difficult because the batteryconnector is so far in the front

@NickBurnsFPV 2 месяца назад

It doesn't come ready for an external camera, like many things in FPV we would have to DIY(3d print) a solution with a gap for the battery connector.

@hoagietime1 Год назад

That camera Fov might actually be ok for some fixed wings. For longer range cruiser wings a slightly pointed down cam with a narrow fov can be a good setup

@NickBurnsFPV Год назад

I don’t have any recent fixed wing experience, that fov might be useful. On wings is it common to have another external hd camera to record?

@Rocketman0407 8 дней назад

@@NickBurnsFPV yes many will put a GoPro or similar on their fixed wings or rc planes for digital hd footage and use a analog for video feed, just like with quads.

@littlewilliewalker Год назад

It looks it has <a href="#" class="seekto" data-time="969">16:9</a> camera better for box goggles, on <a href="#" class="seekto" data-time="243">4:3</a> screen the view is squished horizontally

@NickBurnsFPV Год назад

oh interesting point. I hadn't noticed that aspect of the fov.

@tazgrif11 8 месяцев назад

What battery and charger do you recommend for this drone?

@xxmgz331 6 месяцев назад

Great fly as usual, can you tell the link where you bought that antenna, I have the same drone, I just want to upgraded the antenna for better signal And one last question I used the drone right away when it arrived without the sd card, is needed to use the black box? For better performance? Or it doesn’t makes difference

@NickBurnsFPV 6 месяцев назад

blackbox doesn't have any impact on performance, it is flight characteristics that can be used to pid tune or use the gyro data to use something like gyroflow to improve the video stabilization for an external hd camera. the antenna is the foxeer lolipop, pretty widely available at fpv shops.

@cpfpv6410 Год назад

It looks like you need more camera angle or more battery weight. Seems like it was climbing under acceleration more than desirable.

@arQadjo Год назад

Please do not underestimate old-style buzzer. It can save your drone cause is much more loud than motor beepers.

@NickBurnsFPV Год назад

yep, especially if your out flying a micro in a large space.

@yohfpv Год назад

Using an old-school buzzer on my micro allows me to fly forest paths with thick foliage without a worry. Its wonderful not stressing about losing the thing in the bush.

@Monkey_D_Cluffy Год назад

So compared to the original baby ape pro which one did u prefer overall more? I notice also from this video it seems like the arm replacement is more difficult than the original pro’s 2 arm replacement design less screws to get to replacing the arms. Also your video of you saying your not flying well still impressed my newbie self 😂

@NickBurnsFPV Год назад

Unfortunately I haven't flown the babyape pro. I did fly the babyape 3 which appears very close to the BA pro. I prefer the babyape3, but the flight time is longer on the BA II

@Monkey_D_Cluffy Год назад

That made my decision better :) the BA pro it is lol

@JimmyLima715 Год назад

Can someone please let me know what else I need to buy other than the Baby Ape pro to get started? None of the sites make it easy to understand. If there was a starter kit I'd be interested. Also do I need a windows PC? Only have a Chromebook and android phone

@dronepilot260rc Год назад

I tried Darwin FPV once and my drone caught fire 🔥 after 5 flights. Never again will I buy from them. Baby ape pro running a 3s 550.mah lipo

@SeeFPv-qm6ie 6 месяцев назад

Can you install a walksnail vtx and those the flight controller have a 9v pad

@NickBurnsFPV 6 месяцев назад

I don't see a 9v pad. Normally on HD vtx a 5v pad is sufficient or wire it to battery voltage.

@chickwithstick7695 Год назад

I just bought this can you recommend a direct replacement camera that would fit? Thank you!

@NickBurnsFPV Год назад

any 19mm x 19mm camera should work. Something like the caddx ratel 2.

@zombizh4191 11 месяцев назад

Sorry for the next question🫣 but which lipo do you use for this drone? Darwin recommend in 4s a 850mah lipo… is it more fun to have a 4s 1000mah or 1200mah or is the weight to much than😵‍💫👀

@NickBurnsFPV 11 месяцев назад

the batteries I use are always shown in the video with weights. Adding more battery weight won't always increase flight time but will decrease agility and top end performance.

@tazgrif11 8 месяцев назад

What is the max camera angle?

@billmcdonald4335 Год назад

The Caddx Baby Ratel V2 would be a good upgrade. Better than an Ant, and it won't break your budget.

@NickBurnsFPV Год назад

yes this is true. Last I bought the baby ratel they were only $25.

@billmcdonald4335 Год назад

@@NickBurnsFPV Mine was CDN$36; bought it earlier this month. Much better than the Ant, especially in low light.

@bertbeinaaf8314 Год назад

Old school quads have buzzers? New quads don’t? Seems like i’ve missed something 🤔

@NickBurnsFPV Год назад

well not many of our modern day micros have buzzers, or at least I am not remembering many recently with them. We used to have them pretty consistently 4+ years ago. Micros can be hard to find in the grass :)

@UnlimitedVertical Год назад

Hmmm. I may be the only person in the community who hasn't gone digital but why would they put the power connector right where you'd want to mount your HD camera (i.e. Go2)?

@NickBurnsFPV Год назад

yea, that does create a bit of a nest of wires.

@Subupop 3 месяца назад

Did the antenna come pre installed and was there a big difference between 650 and 850 batteries?

@NickBurnsFPV 3 месяца назад

Unfortunately those are details I can't remember from 10 months ago.

@scu-dub Год назад

Hey nick could you print me just a camera holder for my CINEAPE25 I don't use external cameras and I would love to cut the weight

@phil_fpv9521 Год назад

i order the babe ape pro v2 but they have not shipped yet so i am thinking maybe i should order this new one what do u think ???

@NickBurnsFPV Год назад

they fly fairly similarly. I thin the ap v2 will mount an external hd camera better. But if I recall correctly the 3.5inch version flies longer.

@alexsadovskij324 3 месяца назад

Can you use o3 with this drone? Will it have enought power?

@NickBurnsFPV 3 месяца назад

Not certain, they have a version with the link which is the old version of the dji video system. With that I presume it could take an O3

@FpvSage Год назад

How does this compare to the smart35? The baby ape pro didn’t have the lift or inertia to fling it high. Wasn’t as fun for freestyle.

@NickBurnsFPV Год назад

For much inertia we need weight and thrust. This doesn't have the weight to fling over objects very far.

@airdevil21 7 месяцев назад

Hi Nick! Despite the camera that's some decent freestyle. I was wondering if the hdzero freestyle v2 would fit in the back of the frame?

@NickBurnsFPV 7 месяцев назад

Unfortunately I no longer have this one, I do regular giveaways. I can't be sure it will mount with creativity and the bottom plate slots, at best it would be a maybe.

@airdevil21 7 месяцев назад

@@NickBurnsFPV ah that's difficult to measure then : ) I was thinking because HDZERO has now on their website the happymodel crux35 with the freestyle v2 vtx in it for sale so I thought maybe it will fit this Darwin too. Maybe I can find something on the Darwin website. This frame has replaceable arms right?

@NickBurnsFPV 7 месяцев назад

@@airdevil21 yes. the crux35 has a taller body that likely allows the v2 freestyle to be mounted.

@airdevil21 6 месяцев назад

@@NickBurnsFPVaha oke. Thank you.

@nikotttin Год назад

Any feel difference between these 1504 and 1404? I don’t like my 3.5’’ with 1404. I feel it lacks pop ands wondered whether 1504 could be a good size for such props? Also, and I might have missed it, did you weight the drone?

@NickBurnsFPV Год назад

1404 is much more of a cruiser motor than 1404...at least on three inch props. Especially if we are running 3inch triblades a 1404 doesn't enough to handle that prop well.

@yohfpv Год назад

1404 is more suitable for a smaller 2.5" quad if you have a love of power 🙂

@diggsit69 Год назад

The Darwin babyape should come with 3D printed Motor Protectors. then the Quad would be level with that 3-D print antenna holder, So not Good Darwin Fpv!

@UppfinnarAXEL 7 дней назад

If I want to convert this to Walksnail digital, should I choose the 14mm or the 19m camera?

@NickBurnsFPV 7 дней назад

Depends which walksnail camera you plan to use. The product page for the camera will list the width. We should match that

@Stinky0368 16 дней назад

So do you think I should buy the very first baby ape or this one? It seems like you pointed out a lot of bad things that happened with it. What all is better?

@NickBurnsFPV 16 дней назад

sorry, this was a year ago I don't recall anything specific

@user-gv9yz1fx9y 8 месяцев назад

Hi Nick! Is it possible to install "RunCam Phoenix 2 Nano" or "RunCam Nano 4" on it?

@NickBurnsFPV 8 месяцев назад

as long as its a 14mm wide camera yes it will likely mount normally.

@KlngsRC 10 месяцев назад

Is this good for complete beginners

@NickBurnsFPV 10 месяцев назад

I would go smaller unless you have a big space you plan to fly primarily in. 3.5 is pretty quick for starting out, we would likely need more space.

@fpvStatic 8 месяцев назад

What kind of caddx ant did you use for the comparison

@NickBurnsFPV 8 месяцев назад

Can you reference a moment in the video? I really don't recall the comparison aspect

@fpvStatic 8 месяцев назад

@NickBurnsFPV the part where you are showing the darwin cam on the left and the cadaxx ant you have on the right side. You are talking about how you prefer the fov of the cadaxx and I would as well

@NickBurnsFPV 8 месяцев назад

@@fpvStatic ah gotach. Yes that is the standard caddx ant, it has the mounting screw holes. It is in a different drone though.

@MoeFPV Год назад

Hopefully these motors will be slightly more resilient than the babyape 3 motors.. I broke those if i looked at them the wrong way

@NickBurnsFPV Год назад

I have heard the shafts are breaking is that what broke on yours as well?

@MoeFPV Год назад

@@NickBurnsFPV I had 1 broken shaft and 2 motors that I must have damaged the bell on. They stopped spinning but ESC was fine. Pretty minor crashes too. Otherwise, I enjoyed the drone but that was ultimately why I stopped flying it.

@NickBurnsFPV Год назад

@@MoeFPV Gotcha. Thank you for that information

@scatta2671 11 месяцев назад

This or crux 35?

@ghostrot Год назад

Is the 4s faster then the baby ape on 3s

@NickBurnsFPV Год назад

outright faster?? Yes 3.5inch on 4s is going to be faster.

@bonnet1994 10 месяцев назад

How does the babyape v2 compare to the Crux35 v2?

@NickBurnsFPV 10 месяцев назад

crux35 is more capable of longer and more aggressive flight

@johnkurpiewski3996 Год назад

Do the foam pads go on the arms ???

@NickBurnsFPV Год назад

It came with the foam pad on the rear.

@johnkurpiewski3996 Год назад

Ahhh I see. They do look a little big for the arms. But I love those foams on the arms , and a wrap of your favorite tape keeps them on even in the worst of scraps . I put them on all my quads .

@zombizh4191 Год назад

Is the baby ape 2 better than the baby ape pro v2

@NickBurnsFPV Год назад

better is hard to determine. Depends on what your looking for

@zombizh4191 Год назад

@@NickBurnsFPV well i have a betafpv cetus x for beginning and my dad get the baby ape pro v2. I flow the pro v2 twice and looking for the pro v2 as well or buy the baby ape 2. Only use for fun with a little bit freestyle…

@NickBurnsFPV 11 месяцев назад

@@zombizh4191If I recall correctly the version 2 is bigger with bigger props. With that it likely flies longer on the same capacity battery and should have more top end speed/thrust

@infernalistic Год назад

would you rather choose this or the crux35 to fly?

@lemonsquareFPV Год назад

Crux35 is really fun and agile, one of my first quads, and it was a very good choice on my part! Also really great support from Happymodel, I have had nothing but the best communication with them!!! Absolutely amazing company to work with and I even consider them friends. But be ready to change the frame (the hole placement for the 25.5mm layout really kills the arm durability)… you’ll break it in the the first decent crash, though it did actually take me a while and quite a few crashes. I have had really good experience with the “Recursion Labs” (check his RU-vid channel too!!! Great fun science content!) “Scythe” that you can get from cncdrones. The “AOS 3.5” is also okay if you want something with replaceable arms, but you really can’t beat the Scythe, it’s lighter yet significantly stronger than the Happymodel frame, and keeps the original simplicity and agility. The AOS frame is better for a heavier scratch build.

@NickBurnsFPV Год назад

I too prefer the crux35, that one is a fun rocket with really good flight time as well.

@FERNANDOPR_FPV Год назад

@@lemonsquareFPV okey, so if I would want to switch the cruz35 components to a another frame, what frame would be great to suit for the components?

@lemonsquareFPV Год назад

@@FERNANDOPR_FPV the “Recursion Labs” “Scythe” from “cncdrones” is by far my favourite… but it depends what you have available to you and where you order stuff from. Ordering from Canada may not be the best for everyone… but I do have friends from all around the world that order from cncdrones… but can’t know every situation… If you can’t order from cncdrones, let me know where you normally shop, and I can help you make a decision if you need further help.

@doncunningham3124 Год назад

Just from watching this video, something seems a bit wonky about the way this thing flies.

@NickBurnsFPV Год назад

It could be me as well. I didn’t feel like I adjusted to the camera fov. For me to be certain I would need to swap the camera to one I know I can fly adequately.

@jwhitaker81 Год назад

ATE7456E is the OSD chip and they still haven't shipped my quad :( Have the camera though!

@NickBurnsFPV Год назад

I don’t understand the correlation between the osd chip and the quad shipping?

@jwhitaker81 Год назад

@@NickBurnsFPV I commented that I bought one the day your review came out earlier in the comments. Sorry for the confusion. Good review Nick!

@jwhitaker81 Год назад

Like right below this comment, 4 days ago, lol. Nothing at you Nick.

@NickBurnsFPV Год назад

@@jwhitaker81 ah gotcha. Thanks for the clarification.

@yudhaintishar7972 2 месяца назад

Can fly with full gopro sir ?

@NickBurnsFPV 2 месяца назад

yes, but it will not be nearly as agile as in this video and you will need to design or create a mount.

@yudhaintishar7972 2 месяца назад

@@NickBurnsFPV thanks sir, use full gopro for cinematic only i think hahaha, not freestyle 😁

@NickBurnsFPV 2 месяца назад

@@yudhaintishar7972 yes that flight style would be appropriate.

@yudhaintishar7972 2 месяца назад

@@NickBurnsFPV oke, thankyou sir

@coystycretzu1795 10 месяцев назад

Can i put a 4s 1800mah battery on it?

@NickBurnsFPV 10 месяцев назад

That is an awfully big battery for a 3.5 propped quad. Will it fly…probably. Will it fly very long…probably not as long as a 1100mah. How will it fly…probably like a boat

@coystycretzu1795 10 месяцев назад

@@NickBurnsFPV tnx

@FregoUA Год назад

Does someone know how to mount Runcam thumb on it?

@NickBurnsFPV Год назад

probably have to design a 3d print or find one on printable.com or thingiverse.com

@FregoUA Год назад

@@NickBurnsFPV DarwinFpv support told me same :(

@NickBurnsFPV Год назад

@@FregoUA I do wish these companies would design quads with an assortment of external camera mounts. I guess they are depending on the community to take up that task. A company could bolster their brand if they were to do it. Or at least I think it would bolster the brand.

@jermadjesty Год назад

sd card for blackbox!!

@NickBurnsFPV Год назад

that is does

@JDDupuy Год назад

Cheap recycled motors. Wow they put bolts in these props! Not push on props and hope they don't come off. I rate this as a throw away drone after 2 weeks! Spend your money on something of better quality!

@justinlinty Год назад

can you offer a better choice for 140$? if so link the parts please

@Monkey_D_Cluffy Год назад

@@justinlinty a tinywhoop that’s about it lol.

@hehaheadshot97 Год назад

@@justinlinty $140 gets you a Mobula7 1s ELRS, a Fractal 75 frame kit, and BT2.0 connectors.

@simonholmes3456 Год назад

Cheap and cheerful!

@Monkey_D_Cluffy Год назад

@@hehaheadshot97 that’s a whoop not a 3” or 3.5”

@Maxim_Nub Год назад

like for the video but i will not give a penny more to Darwinfpv as 2 quads died on me in the first week of use last year lol

@NickBurnsFPV Год назад

oh man that stinks. What were the symptoms?

@Maxim_Nub Год назад

@@NickBurnsFPV yeah, thats for their previous baby ape pro. on the first one esc was dead after around 10 batteries, on the second one gyro started glitching and broke after around 4 batteries. no crashes at all lol thats just fyi if you ever will want to recommend this to anyone :D i heard that for a lot of people they live pretty well but i have to be really unlucky

@NickBurnsFPV Год назад

@@Maxim_Nub It does hurt when things like this happen. Not that they should. Sorry. Hopefully the other quads you have are working well.

@omu_fpv Год назад

Idk if I missed it, but what's the mounting patterns for FC, vtx, and motors. Mostly want to know if they finally updating their motor mount pattern to accept more standard motors. I upgraded my baby ape pro's motors to iflight 1504s but had to drill put the holes a little to mount them. I would also switch out the camera to the original Ant, it definitely looks waaay better! Awesome review!! Seems like it's the normal Darwin issues and problems. Really awesome to see some of your freestyling! Sick little rip!! 🔥🤌 #Meowgow

@NickBurnsFPV Год назад

The flight stack is 20x20 and the motors are 4 hole 9x9