Mr Steele ImpulseRC APEX DC Build Video 2022 Fettec/Crossfire/DJI

Подписаться 519 тыс.

Просмотров 200 тыс.

50% 1

Questions Check here V
New HD Dead Cat Frame - bit.ly/3Bog4Tr
NEW V4 Motor - bit.ly/3HRMNDd
New Radio - bit.ly/3AOQ3fh
NEW MR STEELE DISCORD SERVER / discord
Ready To Fly Mr Steele Drone - bit.ly/2RMwbET
ETHiX is my Company & we aim to refine FPV.
Please check us out - ethixltd.com
_ ETHIX APPAREL _
- Triple E Hat - bit.ly/34I7FhS
- Black Ethix - bit.ly/3fE0RCq
- T Shirt - bit.ly/3duvgkO
- Hoody - bit.ly/2yBtAr7
- Beanie - bit.ly/3fEPydn
- Stickers - bit.ly/2WJmFEh - (Vinyl) bit.ly/3GVOlL0
MY personal Amazon Shop.
www.amazon.com...
Please Follow me on other platforms
TIkTokP: / mrsteelefpv
Instagram: / mrsteelefpv
Facebook: / mrsteelefpv
* / mrsteelefpv
My PODCAST (CHECK IT OUT)
teamfailsafe.li...
_MUSIC _
MIss Li - "Stuck in the Sand"
_ ANALOG DRONE_
- Drone Frame - bit.ly/2SWdNKd
- 6S motors - bit.ly/3HRMNDd
- Flight controller - bit.ly/3GM1xCc
- ESC - bit.ly/3qXUwr5
- Props - bit.ly/37gmGpI
- FPV Cam (camera tilt 25°) - bit.ly/3czLZTC
- Video transmitting antenna - bit.ly/2YURw3w
- Video Transmitter (800mW) - bit.ly/2MH5KPZ
- Lightweight 6S Battery - bit.ly/36hke4e
- Ethix Battery Straps - bit.ly/3fEC419 & bit.ly/2yOR241
- Lightweight HD cam - amzn.to/3uThMv2
- New HD Cam - amzn.to/3LFepxu
- Action 2 Lens protector MUST HAVE! - amzn.to/3s0LDzX
- GoPro Lens protector MUST HAVE! - amzn.to/3LA0Lf7
- Ethic GoPro Strap - bit.ly/2AdIsfy
- NEW* ALL UP WEIGHT - 613g -
_ ETHIX Packing Gear _
- NEW Back Pack - bit.ly/329rVDr
- Radio Bag - bit.ly/2WlMgnw
- Heated Battery Bag - bit.ly/3bl6YbG
- Tool Kit - bit.ly/2YUTcJZ
- PROP Bag - bit.ly/2Wm7Qbv
_ Radio Gear _
- Ethix V2 Neck Strap - bit.ly/34YWIbF
- Radio - Ethix Mambo - New Radio - bit.ly/3Jspa4w
- Radio Transmitter (long range) - bit.ly/2PglGqw
- Radio Receiver - bit.ly/2OE6NNK
_ Goggles _
Ethix Goggle Strap - bit.ly/352eVVq
- NEW FPV Goggles - bit.ly/2TI3UkN
- Goggle Pouch - bit.ly/34Ih5tK
- FPV Goggle Receiver - bit.ly/2PP5WzH
(Antennas)
- **NEW FPV Receiving antenna (omni) - bit.ly/30mTSrl
- **FPV Receiving antenna (directional) - bit.ly/3bsS1rl
- Ear Bud (for Quad Audio) - bit.ly/36aQsOp
_ Battery Charging Setup _
- Charger- amzn.to/2nKx0Pe
- Power Supply - amzn.to/3oMDltl
- Parallel Charging Board - bit.ly/2MiCDTw
- Battery Checker - bit.ly/2yNyBg3
_ Home Camera SETUP_
- Sony A7siii - amzn.to/3gQvMgW
- Macro - amzn.to/2Ds9v4D
- Wide angle - amzn.to/2HZzQfV
- fluffy critter - amzn.to/2mCL9xo
_ Tools/parts _
- ETHIX Prop Tool - bit.ly/3gQ72oY
- Tool Kit - bit.ly/2YUTcJZ
- ETHIX builders cable set - bit.ly/2WKCSsT
- Field Soldering Iron (literally, best thing I have ever purchased)
bit.ly/2PhoOma
- *Soldering Iron Cable (need) - bit.ly/2MtqB8T
- Quality solder - amzn.to/2uJ89z3
- Quality Electrical Tape - amzn.to/2mzWkqp
- Quality Heat Shrink -amzn.to/2uH96rP
#FPVFreestyle #Ethix #MrSteeleV4

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 260

@dangrows_za4798 2 года назад

I solder by hand every day of my life and generate an income making products that I solder together. Nothing wrong with how you do it. People could take notes. Only thing I'd do differently is have a fan blowing over your work space while using the iron. Well done Mr. Steele

@WanderinWizard 11 месяцев назад

21:21 you are the build master I learned a lot from your old vids this one is no different you are Meticulous and sometimes its hard to make a perfect vid/ build but you get the point across thanks for all the fpv quad knowledge over the years 👌🏻

@renwillemse9634 2 года назад

Love your vids your vids have brought me into fpv and just want to say thanks mr steele

@grandpabobbydean Год назад

Never mind your piloting skills. Your soldering chops are awe inspiring!

@trisepp 6 месяцев назад

Thanks for that video, over two hours fpv meditation ;) and still learning new things

@steve-adams Год назад

Soldering on a 2x4 over a door mat, I love it

@FlyHighWisconsin 2 года назад

I just got a custom ApexDC HD and love it!! Mine is running a T-Motor F7 Pro FC with Hobbywing 60A ESC, with Tracer. Thing is a beast!

@akitaishi 2 года назад

1:37:58. Steele's got a cockroach in your workshop !

@filiprez33 Год назад

I'd like to see analog continued somehow. Amazing kit and build video. :)

@SBvice 2 года назад

Busy building Apex HD, my first 5inch and this pops up, impeccable timing as usual Mr S!

@atixhd 2 года назад

As usual top notch. Could you share all pids for Apex light, Apex Heavy, Apex DC/Digital so we can use them when we match exactly your builds pls.

@Drawmaster33 2 года назад

In your video you’re making a backup from your other quad to copy that file to the build. Can you share this file please? Can’t see everything what you put through the Kiss GUI. Excellent video btw! Keep up the good work 🙏

@chad9160 2 года назад

Just wanted to drop a thanks for all you do Steele. Got back into fpv thanks to you and am now deciding between this frame and the standard with 5” arms all round. Love your content :)

@RobertDunaway Год назад

This looks like it's going to be a great build. I'm excited to get it all together. Do you have an Amazon link to the Gummies you show at 24:00?

@squintsfpv 2 года назад

Watching now. Glad to see you back it! 💪

@DexterGoneWild 2 года назад

1:37:35 you got a special visitor in the back :}P

@zlachannel8674 2 года назад

after 3 years..finally the new build videos,,,

@spiresfpv 2 года назад

I’m definitely an Apex and Fettec fan!! Awesome video!

@acresfpv4690 2 года назад

I literally came back to this channel yesterday and was wondering, "When is he gonna post a new build video..." I come home today and here this is. I think I am magic.

@tictacturkey3367 2 года назад

I think you are a magic too sir

@joelperez. 2 года назад

You are magic though.💪🏼

@creationlabsinc.189 2 года назад

I concur. That is a strange coincidence. Maybe you are magic!

@sunsetpark_fpv 2 года назад

We need you here in this community bro - errrr - I mean sir 😁

@bernhard8540 2 месяца назад

Quick question, is there a built in osd now with the updated hardware? And whst about on-board audio? I mesn these questions for the analog build parts list in the description? I really like on-board audio and the osd from the og apex I have been flying I built it over covid from your og build video but the frame came with the osd board? So do I need to buy that same board and add it to the new build with the updated parts? Thank you in advance for anyone who can answer and much love to steele for these videos they do wonders for those newer builders like myself 💙💙💙 never not amazing watching a Mr steele build update video💙💙💙

@timhookfpv 2 года назад

Thanks Steele, you're very on time. I'm just about to do it. Hello from Belarus 🇧🇾

@eprohoda 2 года назад

how’s everything going?! fanatstic uploading! :)

@MrSteeleFPV 2 года назад

Things are great I’m back home now. Headed to Rampage this weekend

@bladesfpv4179 2 года назад

Hats off my dude. Your build videos are really detailed and informative. I appreciate the time you take on making them with such detail. Keep up the great work you do in helping moving this hobby forward. Much appreciated!😎🔥🔥🤓

@OfirArbel 2 года назад

I’m building it and I have a question: the capacitor- can it touch the frame ? It looks like you connected it in the front and bend it to the frame . I’m thinking of put it inside a shrink and than connect it to the ESC.

@GooseWurkz 2 года назад

Love your build videos! Always great attention to detail and explanation.

@MrSteeleFPV 2 года назад

My main man Goose!

@ruebenfilmz 2 года назад

Tis the perfect experience. Muchness on ya S. Looking forward to my first build wit thisss

@GrrillaFinger 2 года назад

Big up from the Golden globes

@gmivisualsjason3729 2 года назад

Excellent... just love your Apex frames

@mafiafpv3469 2 года назад

I can’t afford any Mr.Steele stuff but I just watched the whole video ❤️🙏❤️🙏❤️

@LaDreadTeam 2 года назад

I have test new DC Apex it is fine! I have analog version HD and DC frame ...thanks video I give video in French review for Apex this weekend...in hdzero configuration

@ruebenfilmz 2 года назад

Ethix....'Pants Ready' perf vlog name session.

@SevenPoligon 2 года назад

На коврике из прихожей собирает)))

@NaorFPV Год назад

i put the velcro on top of the rubber so the battery will not touch the top screws. and velcro stick good to the rubber

@ShaneGraham057 2 года назад

I personally have found that the black *cloth* electrical tape to be easier to work with when securing motor wires. Nice build!

@lililililililili8667 2 года назад

They have it at the dollar tree in the band aid section

@RC_Aviator 2 года назад

thats a great idea im definitely going to get some of that

@shALKE 2 года назад

Oh, wonderful to have Schumacher in the hobby.

@xxmgz331 9 месяцев назад

2:03:30 that mosquito at 3am 💀

@pafff_3d 2 года назад

Wow! I didn't know that Mick Schumacher is interested in FPV

@FPVChoppa 2 года назад

Thanks Steele.

@FlyZoneFpv 2 года назад

Right on bro. Thanks for this tutorial 🤙🏼

@frshagen 2 года назад

That was a big ass bug on the wall! Holy Fock.

@LilwickedFpv 2 года назад

I just asked a 60 year old man who are you and he told me straight off the bat that is steel he knows nothing about quads you are now my number one fan again !!!!

@NoflectioN 2 года назад

That's funny I just built my Apex DC last night.

@Derickandlannyfpv 2 года назад

King level as always. Doesith sire now fly hd or analog for hardcore freestyle? Stay RAF

@MrSteeleFPV 2 года назад

Analog still

@Sebastian_992 Год назад

Can you still freestyle this thing?

@popfpv 2 года назад

That bug is gonna eat you! Look out! 🤣😅 1:37:34

@K3S01L2 Год назад

The cockroach at 1:37:35 was like "Is it safe to come out alread... NOUP" :D

@RCRitterFPV 2 года назад

I have AOS, FPVcycle, and Project 399 frames... well and a 6" alien.. but I should do one of these, so well dialed. Great build video as always.. No dampening grease ? I'm not sure If I fly better with it, but the frame certainly feels more solid.

@mhoovair89 2 года назад

Apex is better imo

@vighneshagumbe 2 года назад

Do you really recommend fettec That's electronic cach fire 🔥 middle of flight

@toranmurray-preece7354 2 года назад

how much is this whole build ? and can i get these parts easily in the uk ??

@YOSRD 2 года назад

Houaa smooth!!!!!

@bengruber888 2 года назад

just as a heads up, would recommend still using steel on the inner frame-arm screws. In a crash, the head of an aluminum screw there came clean off, leaving the body inside the pressnut. Unable to get it out, I had to replace the whole arm even though no carbon was broken.

@MSR. 2 года назад

So this is what you and Evan did before you left for Nepal 🇳🇵 👊

@MrSteeleFPV 2 года назад

Lol yeah. Kind of

@aceoptixx 2 года назад

This is so nice thank you

@WKfpv 11 месяцев назад

I'm having doubts about hard mounting the o3. Something tells me it will be bad in crashes

@tbrown1352002 2 месяца назад

Finally made the jump to digital about 4 months ago and went with walksnail and their goggles x and have no regrets. Great picture quality and have options for other ecosystems with the a/v in feature. Not a big fan of the DJI monopoly and lack of support for older equipment/airframes

@jasonhull5712 2 года назад

I built so many Apex 5" quads I haven't had to build one in so long.. that and I've been building an old muscle car, I'll be honest. But I still enjoy watching your content. I guess I just feel that we have so many mutual interests or maybe it's just your mad editing skills.. haha. I alway's have time for a Mr Steele video. I think I need them red Mr. Steele motors tho..🤔 And probably should try the Fettec equipment now too, it's been long enough. Good day to you Sir. ✌

@Benzimma 2 года назад

I know Mr. Steele is high AF, he looks like it, also he left the roach on the wall...lofl

@RonWilliams215 2 года назад

You using a doormat for the work area??? Kinda brilliant.

@DavidOwensuk 2 года назад

Great video, my Steele edition Apex DC has just shipped too! So very timely too!

@Bar2Fer 2 года назад

Does it replace the Apex 5 inch classic for Freestyle or is it just another range?

@joelperez. 2 года назад

I have the same question… 🤔

@codymelone249 7 месяцев назад

1:37:35 sweet cockroach

@joannyvillarreal-dn3sm Год назад

I bought this drone a month ago in fpv website but I crash when I try to take off , my spin was on the wrong direction, can I send it to you to help me to fix it and I pay you or any other way ( my dji o3 is black screen I may have to put a new one

@Zanofpv Год назад

Hey Steele, great content as usual! I got your dc frame kit and want to do an analog build! The problem I have is the sma mount doesn’t fit where it should! I think I have the hd version so the back end is wider! Can you tell me if standard apex upper main and top plate is interchangeable with deadcat frame? Any other suggestions on mounting the unify pro securely? Thanks

@jrhager84 Год назад

Everyone keeps giving me a hard time about getting a dead cat o3 frame. You've had a good experience?

@xdboy8150 2 года назад

First comment😺

@stoneenforcer 10 месяцев назад

Am I understanding this correctly, i can gut my dji fpv and move everything onto the mr steel frame?

@chinny0803 Год назад

Steele, is the FETtec Spike-Absorber something that you feel is unnecessary, or was it not an available product until now?

@razved4uk 2 года назад

1:37:39 there is a roach on the wall climbing 😁

@MrSteeleFPV 2 года назад

Lmfao 🤣. Lovely.

@TechTimeElectronics 2 года назад

@ 1:37:40 theres a fast moving bug on the wall behind him by his head...lol

@ryanjones6837 2 года назад

The fact this is for mick makes both you guys so much cooler. Wow

@marcelarndt4772 2 года назад

Hi good construction👍, I copied it exactly like that.Unfortunately I'm currently having problems with full throttle. then the quad shakes very hard. I'm testing with the PID's. Can you post your PID's? would be very grateful. Greetings Marcel

@flytec3d933 2 года назад

Crash, rip , rebuilt, I tend to find the weak spots in my quads pretty quickly ! The strength in your APEX are excellent Steele, hopefully now I will be more in the air than on my bench lol Great video and thanks for all your input...

@BrianQuigleyPatrick 2 года назад

Where to get the gummies Mr. Steele used to isolate the ESC?

@MrSteeleFPV 2 года назад

I got them from Amazon. Uxcell silicone 3mm inner Diameter 7mm outer diameter 20pcs

@broken6431 Год назад

Wow piękny dron pozdrawiam

@findler 2 года назад

Can't recommend the classic apex enough :)

@lililililililili8667 2 года назад

Do you have any secret insider tips on when kiss ultra will be in stock again even fettec stuff is out of stock everywhere

@TERBANGFPV 2 года назад

maybe i missed something.. but wheres the SPIKE ABSORBER and CAPS? 😷

@mrmagoo600 Год назад

Do you know of any reason the G4 1.7 won’t connect to the kiss gui ! is there a step that needs to be taken? It’s ok I’ve done it, had to load kiss firmware on it first from the FETtec configurator

@holisticaustralia 6 месяцев назад

I really enjoyed your build Mr.Steel, when I was young I flew the dual prop 🚁 then I got a drone and it flew away on me, I Decided I wasn't going to fly anymore until one day I got the DJI AIR 3, to bring some cinematic content to my channel, I found I liked sport mode best and Decided FPV was the way to go, long story short TINYHAWK 3 stuck in a tree, broke my AIR 3 trying to get it down, 3 more quads coming in the mail 😅 not sure what my first build will be but I certainly like watching these tutorials to have a little preparation. Much love and Respect 🙏 from Australia 🇦🇺 I dig your style Brother 👌😊

@SmudgeFPV 2 года назад

are you use conformal coating bro?

@bugsy742 2 года назад

So I love the frame but I want to put my Analog setup in it, what problems might I face please? Thanks to anyone out there who responds I’ve destroyed my chimera 5 and am wanting to replace it as soon as I can 👍

@MLYE_realchris 6 месяцев назад

Mr. Steele in Black-Red-Gold 😊 Love the shirt…. Cheers from Germany. Your mindset is golden… wishing more people would think in that way…some principles should never get old thank you for getting me into FPV with this…

@NathanFPV 2 года назад

I'm building Apex DC. I excite to flight on new quad. I hope that I get your kiss backup file. How to I get a your settings?

@gulfstream1FPV Месяц назад

800 C? that's HOT don't you mean F?

@JayGraphix 2 года назад

Nice ... No More Top frame VTX mounts ... Sooo much nicer and cleaner. Great build Steele ... Now, if you would like to donate, I can send you my address.

@weirdmark Год назад

I don’t know if you still get notifications but I watched this last night and was fascinated. I guess I have no life. I’m 74 and probably won’t build one but would like to. I’m trying to learn but it is hard. I have an Avata and eventually will try manual mode. Any way I thought it is a great video. You made the soldering look easy.

@spacecentraleurope9826 2 года назад

Any particular reason why the Vista has to be isolated from the frame? Never heard that before

@MrSteeleFPV 2 года назад

I explained it if you listened :)

@stainfpv 2 года назад

Any plans to release the 7” DC?👀🧐

@MrSteeleFPV 2 года назад

Working on it

@stainfpv 2 года назад

@@MrSteeleFPV the words I wanted to hear!

@TheMadmacs 2 года назад

cool, mick schummacher? thats a couple of race drivers i've heard are into fpv. ps. pretty sure mick will name drop you to his fpv pals hehehe

@quigongiangaming3391 2 года назад

What batteries should I get for my 6s nazgul 5 v2? I think tattu R-line 1300 or CNHL Black Series 1300 would be good. Should I do one of those or something else?

@matuka3755 2 года назад

Many of us have been learning from your build videos since you started making them, Steele; and this one did not disappoint ;-) I was hoping to catch a peek at how you worked mounting the Air Unit and its dual antennae - maybe a short follow-up with that?..

@gpolak1 2 года назад

So next one for me and my father ;)

@mhoovair89 2 года назад

Fettec g4 vs ultra what’s your opinion?

@20reps28 2 года назад

sadfully the apex frame is sold out everywhere here in germany...

@jamesscarr3372 2 года назад

Surely the flight characteristics are compromised somewhat as the deadcat design means that the length between motors is different to a normal frame even if the width is not and it is still a square?

@MrSteeleFPV 2 года назад

You just shift the batter back a few cm and it sets up the CoG

@MrSteeleFPV 2 года назад

Since the motors are symmetrical the on this “deadcat” if you shift the CoG back it flies super close to a standard X quad

@jamesscarr3372 2 года назад

Ah that makes sense cheers! Will be buying one shortly

@mcronfpv8736 Год назад

oh oh I didn't know this existed... I'm tempted to buy one to put 7inch arms in the back and 6 inch in the front : would it work with 6 inch props ? The idea is to get a DC frame to film ski, and the added flight time of a 6inch is very nice in winter...

@elis51501 2 года назад

so is the fettec esc 4n1 esc better then the kiss 25 amp 4n1 esc

@damonbfpv 2 года назад

Met a guy at my local field who was rocking an apex.. We had a mid air collision and both my tbs 7 inch and his apex brushed it off like it was nothing 😂

@joshuapierce-bx8qu Год назад

I’m curious, is blue loctite needed for any of the screws??? I was under the impression every screw was going to need loctite

@kapnmorganfpv5784 2 года назад

just built mine with top shelf parts about six weeks ago and no longer than 10 seconds in the first flight i knew it was my favorite quad by far. fettec g4 aio 35a brother hobby gom dji camera on caddix vista. love it