3. Acceleration of the Performance Catamaran Build - Construction Manager Tung gives the OK

Подписаться 129 тыс.

Просмотров 35 тыс.

50% 1

Become a patron, / elcanoworldchallenge
The Odisea 48 from Odisea Catamarans has just started to get built in Vietnam. The design is complete, the paperwork has been done and now the factory has had 4 days to start the job and they are welding like madmen. Finally the wait is over, the Elcano World Challenge will begin in 2024 people.
If you would like to help the project along then become a patron and get access to exclusive content.
/ elcanoworldchallenge
Give it a thumbs up if you liked this episode!
Get your Sailing Into Freedom Crew T-shirt:
teespring.com/...
If you would like to support with single donations click here - www.paypal.me/...
Check out some gear we have on the boat:
Inverter
www.amazon.com...
handheld radio
www.amazon.com...
(As an Amazon Associate I earn from qualifying purchases and I greatly appreciate your support!)
Also follow us on -
Instagram: / sailingintofreedom
Facebook: / sailingintofreedom
Our website: www.sailingint... it a thumbs up if you liked this episode!
Get your Sailing Into Freedom Crew T-shirt:
teespring.com/...
If you would like to support with single donations click here - www.paypal.me/...

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 350

@markw6586 9 месяцев назад

I'm tipping there is a fair few people who would be kicking themselves about now, not getting involved in the Kickstarter for this build. This is huge!!!

@themadjedi2488 9 месяцев назад

Dude Idea you should sell or auction the off cuts from a butt weld from Freedom Too. Or can I buy one maybe, a piece of that with the plucky/freedom metal stamp on it

@SAILINGintoFREEDOM 9 месяцев назад

That's a great idea

@chrispy104k 9 месяцев назад

These guys are getting it done. Impressive.

@captainsensible298 9 месяцев назад

Enjoying watching the build, AWESOME workshop with gantry crane and ALL. SOOOOOO cool, just make sure all and I mean ALL your electrical systems are electrically isolated from the Hull and Mast, get a few big buckets of tefgel

@peterhancox5268 9 месяцев назад

Yeah, aluminium hammer, but then they go a wire wheel grinder to clean up around their welds😮

@Naturalook 9 месяцев назад

Why are there 2 boats.... you will hurt your arms trying to steer two boats.

@dennisgabriel9641 9 месяцев назад

One of the best pieces of advice ever given to me was, "You don't need to know all the answers. You just need to know where to go to find them." Boat looks good. 💯

@Naturalook 9 месяцев назад

I want a longsleve t-shirt. The Odisea logo, on the back, with the Odisea 48 completed boat under it. On the front is the Odisea 48 skeleton, with a smaller Logo on the pocket... and Sailing into Freedom on the sleeves. It should be in the color of the workers uniform, (off white), and if you have a pullover windbreaker, I want one of those, too.

@josephclayton1835 9 месяцев назад

Wear glasses, I caught weld flash before, not good at all

@TRCAdventures 9 месяцев назад

So exciting! Looks like they have room in there to start one for me.... LoL

@leesydneyharry7958 9 месяцев назад

Yeah right on , we’re all happy for you brother would just like to know how you pulled it off? How much did it cost?😊

@christopherw4527 9 месяцев назад

I'm glad you went the route to have pros do this job Plukky. As a welder I knew it would be a extremely bad idea to try to do this yourself. Not beating you up. I'm excited for you. I like these update videos.

@christopherw4527 9 месяцев назад

@@teeanahera8949 You can be a very accomplished welder and tack without a shield. I've done it for almost thirty years. The trick is not to look silly. As far as PPE, that is up to the individual or employer. They DO have safety equipment, just choose not to use them. Maybe just settle down a little bit with the insulting part huh? Be responsible for yourself. Trying to mother everybody doesn't really work, and it is not your job.

@braithmiller 9 месяцев назад

@@teeanahera8949Standards are a few years behind some of us. Plenty of places in the states not much better. Job quality over worker safety, O right same here regardless of safety progress.

@chattonlad9382 9 месяцев назад

@@teeanahera8949 Most welders all over the world shut their eyes when tacking up. Don't make comments unless you know what you are talking about.

@stevemorgan4702 9 месяцев назад

It's an "open shop". Not a "union shop" or "corporate shop". Safety regulations don't exist. Nor should they. An accomplished, skilled craftsmen should be his own man. I'm an old dog and have been fortunate to have built machines all over the world. I've always been a "hobo" welder. If the inspector is satisfied with my work I can make a decent living anywhere. Personally I wear proper safety gear but I respect those who choose not to or can't afford it. Enjoy the show brother. Plucky, if you get an eye burn put a slice of potato on your eyes overnight. It works. I have no idea why. Love watching your incredible life. God bless.

@fulltimber 9 месяцев назад

@stevemorgan4702 I just use a very cool wet facecloth or bandanna folded up to about a 2 inch strip wide and place that over your eyes as you are lying down in bed, you might have a damp pillow for most of the night, but you'll feel much better in the morning. You'll be awake awhile before you doze off, just remember to keep it very damp if the moisture drains away too quick.

@deb8568 9 месяцев назад

Peter, I am starting to think you'll be on the water much much sooner than originally planned! This is great seeing it from the very start!

@alfredneuman6488 9 месяцев назад

The hull is the quickest part of the build normally, just depends on how sophisticated the fit out is.

@Day_Tripper39 9 месяцев назад

@@alfredneuman6488 It's all about efficiency when it comes to this boat. It's mainly about how fast it goes with the least amount of energy. There will be no wasted time trying to decide what color the drapes will be, or how many pictures to hang on the walls. Just top efficency PeePo.

@alfredneuman6488 9 месяцев назад

@@Day_Tripper39 Since when did you get in Plukky's brain? Or have you been employed by him as his mouth piece? Are you a boat builder? Have you seen the plans and privy to the engineering behind them?

@murrat 9 месяцев назад

The workers need some hearing protection.

@josephclayton1835 9 месяцев назад

Iron hammer would imbed iron into aluminum which will cause galvanic reaction

@rhuffines13 9 месяцев назад

Hurry Puckky , Lisa and pineapples await you !!

@justthinkaboutit7983 9 месяцев назад

I love how one of the welder's attempts to close his eyes for each tack weld. I've watched all the videos but I don't recall hearing the predicted completion date for this build?

@ianh2674 9 месяцев назад

More great progress Peter, very professional team on the build.

@rboston33 9 месяцев назад

poco a poco

@californiakayaker 9 месяцев назад

Absolutely lightning speed. I think this one will be the fastest of the three new boats, one I believe in China, two including yours in Vietnam. And also more detail re construction of an aluminum boat than ever. Regarding this round the world thing, would you be using the Capes ? Have you seen much of the GGR ? And one final question, tell me about the welding glasses they are using ?

@SAILINGintoFREEDOM 9 месяцев назад

Will find out my friend

@SAILINGintoFREEDOM 9 месяцев назад

Don't know the route yet. Will depend on people joining up

@troublekaliman 9 месяцев назад

...capessss...mmmm...@@SAILINGintoFREEDOM

@OgLid 9 месяцев назад

I was doing something else…glad to stop for a distraction of the shipyard kind….i can smell the welds…😅

@jmccabe419 9 месяцев назад

Awesome work by the team there. Very happy for you Peter

@kolingro3776 9 месяцев назад

Imagine the Cost of this in Australia...... Budget Blowout and Overrun Time....

@samhowitt70 9 месяцев назад

Aluminum hammer so it doesn't contaminate the weld with a foreign metal.

@chrisoh6627 9 месяцев назад

As a qualified metal fabricator with experience in steel truck bodies, oil rigs, aluminium radiators and boats etc. I'd be happy to sail in their aluminium catamaran. Keeping up standards and cleanliness. Might just need to buy a few weldibg screens to stop "some" of the welding flash spreading. Still walking around your going to get stung. Worst is when your concentrating on a job and its getting you with reflection or in the corner of your eye. Thats how ive ended up with tomatoe slices resting on my eye lids with eye drops in lol

@nealchristensen1793 9 месяцев назад

Potato slices

@chrisoh6627 9 месяцев назад

@@teeanahera8949 It happens when I was an apprentice at a run of the mill fabrication shop it was the norm. You'll find they will put sunscreen on before starting work particularly on the back of their eye lids. As they get the brunt of the ray burn when you close your eyes. Amplified by the fact you normally don't have your eyes closed when your in the sun.

@Day_Tripper39 9 месяцев назад

Can't believe they already have the bulkheads done. I think they work a lot faster when you're there watching them.

@troublekaliman 9 месяцев назад

I think they work just as fast when he's not there. But they do seem excited to be a major part of the "Sailing Into Freedom" channel, going forward! I think Plukky should think of them just like part of his crew on his old boat...get to know them, even their off-time... rocking ton's of great Plukky content.

@SAILINGintoFREEDOM 9 месяцев назад

Water boils quicker when watched in Vietnam

@boatelectricaldiy 9 месяцев назад

The reason for the hammer is 2 fold. First and foremost, it does not introduce material that will compromise the weld. It also does nott dent as easy as a harder hammer. (edit: you answered later in the video.)

@reb4898 9 месяцев назад

Wouldn’t be long now…

@davidfield4432 9 месяцев назад

❤❤❤❤👌👌👌👌💪🙏🙏🙏🙏🙏

@melinda5777 9 месяцев назад

Cap'n your exactly right about learning! I was told many years ago, I you don't learn something every day, then that day was a waste. It's true. 🙏❤🇺🇸🇸🇭⛵👣🤗🍍🍍🍍🍍🍍

@californiakayaker 9 месяцев назад

Wow. pretty incredible. And I only had to pay $25 to see all this. Cool !

@SAILINGintoFREEDOM 9 месяцев назад

Actually Patreon/paypaller/kickstarter ONLY video will be released this week. I WILL TRY TO DO 2 EXCLUSIVE VIDEOS A MONTH BUT I MAY DO 4 IF I GET ENOUGH PEOPLE IN BOARD

@hedleyjackson5131 9 месяцев назад

That weld quality is outstanding, had an aluminium fuel tank repaired this year understanding the material properties and welding skill needed for quality work.

@fulltimber 9 месяцев назад

Peter, we call them " run on/run off" plates nearly always used for FSBW ( full strength butt weld ). Obviously, other people and places will call them something else, sometimes they are longer and the run on and off are longer as well , depending on how thick the parent metal thickness is and to help absorb heat , so that the weld at edges that isnt ground away will have the same contour throughout the needed length of the weld. As the multiple passes get laid down, those little run on/off plates can become very very hot , much more than the parent metal as the heat has nowhere else to expand too, because of the limitations of the end of the plate. Sometimes a too shorter of a run on/off plate can get too hot too quick and therefore the weld contour can not always have same vertical profile at the ends of the needed weld as the centre of the weld, therefore requiring uneven extra build up at both ends resulting in an ugly appearance and possible weld defects, or a grind out ordered by the inspector.

@SAILINGintoFREEDOM 9 месяцев назад

Exactly what i said pfffff. Thanks my friend. Please keep commenting. We all need to know this and good people like yourself take the time to educate. Well done. I look forward to your next comment my friend

@ASDPOWER 9 месяцев назад

Keep em coming this is fantastic to watch !!!! awesome job.. So Odesea have taken your inspiration and are making their first foray into building a whole boat am I right? Im loving this Man so cool love from Perth!!

@brentpenfold1795 9 месяцев назад

So happy for you Plukky and the Odisea team. :o)

@teds8747 9 месяцев назад

So, we will see a splash video in a week or two then! ;) ... moving fast!

@petermccarthy5762 9 месяцев назад

Just saying Plucky, you’ve pulled me back to the channel. Cheers mate.

@keirenhood5373 9 месяцев назад

@stephenburrows4250 9 месяцев назад

I'm guessing but I expect the aluminium hammer will also stop/avoid dents etc being put in the face and edges of the structural material - being of the same substance... 🤔

@johnmajewski1065 9 месяцев назад

Great project and epic progress! The guys welding should wear and use sunglasses if not a welders mask! If your having flashes what is the welder seeing? SV Skoiern IV

@trippontwowheels 9 месяцев назад

Taking shape nicely. Looking good.

@Vidar.m 9 месяцев назад

Great ! They work fast, exciting..

@ae7v 9 месяцев назад

Wow, these guys seem to be moving right along. Your insight into university is correct. But in today's day and time in the USA, at least. Professors feel the need to not teach how to think but what to think. I hope this turns around before my grandkids go to college. I hope they don't go to college but to a trade school instead just to avoid that crap.

@joeglenn1480 9 месяцев назад

Looking good, work ethic much different than in USA?

@AnalogLife314 9 месяцев назад

Looks great, enjoying the details, nothing but quality

@bwfvc7770 9 месяцев назад

Man, these guys are racing ahead. Good stuff!

@frankd2301 9 месяцев назад

Interesting point about the aluminium hammer. Never thought of that.

@papachuck6007 9 месяцев назад

Welding by braille is always a good choice! Nothing but quality ppl!!

@jamesjoyce5611 9 месяцев назад

i wish to amend my 6 week hull build time. as two vessels are being built simultaneously, i recon the pair will be done in 11 weeks (or even less). nice to have the teccy tit bits

@comfortablynumb9342 9 месяцев назад

Holy WOW Plukky, she's coming along quickly. When you said you were going to Vietnam I pictured a shack in a jungle, not a modern production facility. I'm impressed. And I'm stoked for you dude, you should be sailing on her much sooner than I figured. Cool. Buena suerte y cuidate mucho!

@greatnorthern3481 9 месяцев назад

I love all the new pressed uniforms 😂

@pemman 9 месяцев назад

Good to see the early part of the build. Nice one Plukky 🙂

@goomtoob8714 9 месяцев назад

first sea trip and you will need to spear and fill the freezer with some great sea food and put on a big cook up for the tradesmen who built this boat for you.

@leeschaeferfishing5458 9 месяцев назад

That close your eyes and weld technique is fairly sketchy lol

@harrymerritt7745 9 месяцев назад

Ready by Christmas

@moelnaghi3714 9 месяцев назад

Keep it up bro 💪🏽

@ST-xx9rt 9 месяцев назад

Around the world we go! Bet she'll fly

@TTM-GEB 9 месяцев назад

This that and mote awsome😊 stuff people!!!

@sailingeos204 9 месяцев назад

Been following all along but must have missed something..... I thought you were organizing a Mumby 48 to be built in Greece.

@Stenn333 9 месяцев назад

"...following all along..."? You've missed quite a bit....EU red tape sunk the Greek connection...so Plukky pivotted back to Asia....remember, originally intended Philippines build before Greece, now found connection at sometimes-military fab yard in Viet Nam...going full speed now. 🎯⛵️🥳

@chrisoh6627 9 месяцев назад

Great work from the team! Hull will be built in no time 😮

@troublekaliman 9 месяцев назад

Very solid approach to building an aluminium boat.

@RogueBohemian 9 месяцев назад

Hold your hand up to block your eyes from the arc.

@leadreviewer3257 9 месяцев назад

Great video its all coming along

@festerofest4374 9 месяцев назад

For cat construction, how common is aluminum for the frame material? And what other methods are used? This must be the lightest possible way other than maybe using carbon fiber. Maybe big $$ race cats use that construction method?? And I'm sure Plucky mentioned it in precious episodes but I was probably zoning out.... what is it going to be skinned with.... more aluminum?

@alecvanrossen4941 9 месяцев назад

Plucky, With your electric motor thru-hull drive shafts that you going to install, will they be mounted inboard of the 20mm thick keel plate that runs the length of each hull? What about the centre-line of rudders in relation to this 20mm keel plate?

@SAILINGintoFREEDOM 9 месяцев назад

Good question...answers coming in future episode's

@paulsalter2367 9 месяцев назад

if you tried to do this on a property or in the boonies with a few helpers, you'd still be clearing, levelling and getting the strong back, lofting table (no cnc cut-outs for you) shelter up and figuring power and material delivery and storage out, at 3 months you'd still be cutting and reinforcing those bulkheads and 6 months maybe a few have gone up and you've put several fist sized dints in the welders case as warping is slowing you down to a crawl and you start crowdfunding for 5 welders. You're applying all your resources with uber efficiency, and its just brilliant to watch skilled people do quality work quickly with confidence. it really is nothin but quality

@oleran4569 9 месяцев назад

The tabs are great!

@guvmntout 9 месяцев назад

Nothing but quality people!

@thomasg1323 9 месяцев назад

Awesome…The captain and the crew is getting it done. Bravo

@NCMTNBOY 9 месяцев назад

Looks great. You have a wonderful team building your boat.

@nortonmolly 9 месяцев назад

Plucky, those little plates are called Run Off Plates. To avoid worm hole cracks in the start and finish of the weld seam.

@stevemorgan4702 9 месяцев назад

Yep, they also help with distortion and any loss of material on that edge. That's a pro trick.

@SailingSisu 9 месяцев назад

Wow, the acceleration of the performance catamaran build is truly impressive! It's clear that these guys are getting it done and seeing the progress is absolutely amazing. Plukky, it's great to see the updates on the construction process. Keep up the great work, team! The hull will be built in no time! 😮

@ASDPOWER 9 месяцев назад

Is it just me or is there 2 catamarans ? Is one a spare?

@Gordon_L 9 месяцев назад

Presumably the wire cup brush used on the angle grinder at 7:00 is stainless steel .

@SAILINGintoFREEDOM 9 месяцев назад

Yes and only used on the aluminium

@nooneanybodyknows7912 9 месяцев назад

It's loud and hot from the sweat running down your chest. Working man's environment. 💪

@julesmoto9022 9 месяцев назад

So what is the boat next to yours? Another the same?

@SAILINGintoFREEDOM 9 месяцев назад

Is already sold

@Laarth 9 месяцев назад

HSE not highest priority... If you compare with western standards...

@micheldupont4905 9 месяцев назад

Gonna be sailing the 7 seas in no time

@PhilipFernandez-h1z 9 месяцев назад

Shure is a bare bones start up. Love your work ethic!!

@johnmiglautsch4587 9 месяцев назад

are they building 2 boats at the same time?

@kaptkay69 9 месяцев назад

Yeah I noticed what looked like a parallel build, beside it .

@johnmiglautsch4587 9 месяцев назад

@@kaptkay69 it's definitely next to it but it could be the front half of the boat. It doesn't make sense though since they have so much room in front and behind that they would put them side by side.

@Bretandmarisa 9 месяцев назад

It's happening!

@bilharzia 9 месяцев назад

Love this technical boat building stuff. Especially interested in aluminum.

@calmauric8218 9 месяцев назад

Could almost make a boat from all the beer cans I recycle ♻️

@Gordon_L 9 месяцев назад

Perhaps you could make an entry in the beer can regatta , or sponsor a team with building materials 😊

@rezawaheed8879 9 месяцев назад

uni verse city

@timshimmin3468 9 месяцев назад

Really excited to see the build from scratch...especially knowing you are prob gonna test this to destruction on some dark reef off some fa-flung island. ....not that I am being critical....or anything...

@kirstenodendaal9339 9 месяцев назад

Nothing but quality from these guys. You must have n middle name Odisea, Plukky.

@troublekaliman 9 месяцев назад

@billyjames7735 9 месяцев назад

looks like a great crew working on the boat high quality craftmanship.

@troublekaliman 9 месяцев назад

that 'crew' is definitely Top Stuff peopo!

@billydaniel900 9 месяцев назад

Looking good 👍

@petefromoz9308 9 месяцев назад

Certainly going heaps quicker than in that one family business where the Mumby Jupiter 2 was built. Amazing

@maverickmyrtlebeach 9 месяцев назад

Amazing work. Watching that tacking if your eyes feel like you have sand in them scratching... It takes a few hours to happen.. Be safe bud ~

@LondonCarnaval 9 месяцев назад

Awesome Peter 👌 I just wish you can do something about the back ground noises. Or going during their break. Great stuff but unfortunately I only watch in mute 🔇 Very best of luck 👍 👌 👏

@kristaready8812 9 месяцев назад

She's coming along swimmingly. Fantabulous!! 🤗💞

@epsilonvonvehron5820 9 месяцев назад

Looking great. You should bring those guys a Vegemite sandwich. 🥪

@sergetremblay4506 9 месяцев назад

Amazing. Plukky if you wear glasses you can’t get what we call a « flash « in your eyes. A flash is painfull , it is like having sand in your eyes. Project looking good.

@ottisthedog3544 9 месяцев назад

Liked! Subscribed!! Commented!!! nice! it would be really Nice if they could put the whole thing in an oven after the substructure was done welding to stress relieve it.

@Bm-ri7ks 8 месяцев назад

Awesome plucky. Tuned out for a bit as thought it was never gonna happen. Awesome decision to go there. Congratulations

@rickinmi 9 месяцев назад

Man, that's looking great, Peter! Makes me wanna build sruff!

@pnr9730 9 месяцев назад

She will be the strongest Cat ever. Omg so awesome very impressive 🎉

@webheadusa9377 9 месяцев назад

I thought I heard the hiss of gas a nano-second before the welding arc started. I think I see gas tanks along the wall by the welding machines. Peter, would you please explain the type of welding and the process that is going on here? At this pace, it won't be long until we hear the splash of water... shh... listen.for it... . :¬) Webhead USA

@Roskellan 9 месяцев назад

Aluminum hammer very sensible. Later you will have to be very careful to what drops down in to the bilge as well - unless you don't mind some drainage holes you didn't plan on 🙂 Arc eye, very painful. Don't launch any time soon, you will go straight to the bottom 🙂

@davidyendoll5903 9 месяцев назад

The more we learn about any subject , the more we realise we do not know that subject . That does not mean our learning has been wasted , far from it , but it does mean we now appreciate how much more we could learn , if we wanted or needed to , about that subject , skill , whatever . Peter is right , having specialised in a subject a person can realise a route to another subject . I doubt that anyone can master all the subjects , but some can master a few and the very wise can master subjects that actually benefit themselves and their society .